↓ Skip to main content

Handbook of Manufacturing Engineering and Technology

Overview of attention for book
Cover of 'Handbook of Manufacturing Engineering and Technology'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Science of Machining
  3. Altmetric Badge
    Chapter 2 Machinability of Engineering Materials
  4. Altmetric Badge
    Chapter 4 Machine Tools for Machining
  5. Altmetric Badge
    Chapter 6 Machining Process Monitoring
  6. Altmetric Badge
    Chapter 7 Coolant and Lubrication in Machining
  7. Altmetric Badge
    Chapter 9 Fixed Abrasive Machining
  8. Altmetric Badge
    Chapter 10 Loose Abrasive Machining
  9. Altmetric Badge
    Chapter 11 Machining Dynamics Machining dynamics in Manufacturing
  10. Altmetric Badge
    Chapter 12 Mechanical Micro-machining
  11. Altmetric Badge
    Chapter 13 Simulation in Machining
  12. Altmetric Badge
    Chapter 14 Environmentally Friendly Machining Machining process environmentally friendly machining
  13. Altmetric Badge
    Chapter 15 Hybrid Machining Processes Hybrid machining process (HMP)
  14. Altmetric Badge
    Chapter 16 Virtual Machining
  15. Altmetric Badge
    Chapter 18 Life Cycle Management of LCD Televisions – Case Study
  16. Altmetric Badge
    Chapter 19 Fundamentals of Polymers and Polymer Composite
  17. Altmetric Badge
    Chapter 20 Polymer Surface Treatment and Coating Technologies
  18. Altmetric Badge
    Chapter 22 Properties and Applications of Polymer Nanocomposite
  19. Altmetric Badge
    Chapter 23 Polymer Foam Technology
  20. Altmetric Badge
    Chapter 25 Improved Intelligent Water Drops Optimization Algorithm for Achieving Single and Multiple Objective Job Shop Scheduling Solutions
  21. Altmetric Badge
    Chapter 26 Foresight of the Surface Technology in Manufacturing
  22. Altmetric Badge
    Chapter 27 Laser Surface Engineering
  23. Altmetric Badge
    Chapter 28 Magnetron Sputtering Technique
  24. Altmetric Badge
    Chapter 29 Physical Vapor Deposition in Manufacturing
  25. Altmetric Badge
    Chapter 30 Chemical Vapor Deposition in Manufacturing
  26. Altmetric Badge
    Chapter 31 Thermal and Cold Spraying Technology in Manufacturing
  27. Altmetric Badge
    Chapter 32 Electrochemical Processes in Manufacturing
  28. Altmetric Badge
    Chapter 33 Electrochemical Deposition and Mechanical Property Enhancement of the Nickel and Nickel-Cobalt Films
  29. Altmetric Badge
    Chapter 35 Laser Surface Treatment in Manufacturing
  30. Altmetric Badge
    Chapter 37 Rapid Prototyping in Manufacturing
  31. Altmetric Badge
    Chapter 38 Rapid Manufacturing Using FDM Systems
  32. Altmetric Badge
    Chapter 39 Rapid Tooling in Manufacturing
  33. Altmetric Badge
    Chapter 40 Micro Prototyping and Fabrication in Manufacturing
  34. Altmetric Badge
    Chapter 41 Reverse Engineering for Additive Manufacturing
  35. Altmetric Badge
    Chapter 42 Materials in Metal Forming
  36. Altmetric Badge
    Chapter 43 Roll Forming
  37. Altmetric Badge
    Chapter 44 Bulk Metal Forming Processes in Manufacturing
  38. Altmetric Badge
    Chapter 45 Incremental Metal Forming Processes in Manufacturing
  39. Altmetric Badge
    Chapter 46 Combined Sheet and Bulk Forming of High Value Added Components in Manufacturing
  40. Altmetric Badge
    Chapter 47 Surface Modification of Semiconductor by Simultaneous Thermal Oxidation Oxidation See Nitridation and Nitridation
  41. Altmetric Badge
    Chapter 48 Powder Processing of Bulk Components in Manufacturing
  42. Altmetric Badge
    Chapter 49 Surface Treatments for Magnesium Alloys
  43. Altmetric Badge
    Chapter 51 Thermal Stress Analysis and Characterization of Themo-Mechanical Properties of Thin Films on an Elastic Substrate
  44. Altmetric Badge
    Chapter 52 Sustainable Value Creation in Manufacturing at Product and Process Levels: Metrics-Based Evaluation
  45. Altmetric Badge
    Chapter 53 Arc Welding
  46. Altmetric Badge
    Chapter 54 High Energy Beam Welding Processes in Manufacturing
  47. Altmetric Badge
    Chapter 55 Solid State Welding Processes in Manufacturing Welding process Manufacturing, solid state welding processes in
  48. Altmetric Badge
    Chapter 57 Remaining Life Prediction of Cores Based on Data-driven and Physical Modeling Methods
  49. Altmetric Badge
    Chapter 58 Adhesive Bonding Technology
  50. Altmetric Badge
    Chapter 59 Solder Joint Technology
  51. Altmetric Badge
    Chapter 60 Solid State Microjoining Processes in Manufacturing
  52. Altmetric Badge
    Chapter 61 Process of Nanojoining
  53. Altmetric Badge
    Chapter 62 State-of-the-Art for Nanomanufacturing Using Ion Beam Technology
  54. Altmetric Badge
    Chapter 63 Ion Beam Instruments Used for Nanomanufacturing
  55. Altmetric Badge
    Chapter 64 Introduction to Nanomanufacturing Using Ion Beam Technology
  56. Altmetric Badge
    Chapter 65 Ion Beam Figuring Technology
  57. Altmetric Badge
    Chapter 66 Focused Ion Beam Nanofabrication Technology
  58. Altmetric Badge
    Chapter 67 Micro Tools Fabrication by Focused Ion Beam Technology
  59. Altmetric Badge
    Chapter 68 Plasma-Based Nanomanufacturing Under Atmospheric Pressure
  60. Altmetric Badge
    Chapter 69 Nano-gap Electrodes Developed Using Focused Ion Beam Technology
  61. Altmetric Badge
    Chapter 70 Nanometric Cutting of Crystal Surfaces Modified by Ion Implantation
  62. Altmetric Badge
    Chapter 71 Electrical Discharge Machining Processes
  63. Altmetric Badge
    Chapter 72 Product Design for Remanufacturing
  64. Altmetric Badge
    Chapter 74 Process of Laser Machining
  65. Altmetric Badge
    Chapter 75 WaterJet Machining Process
  66. Altmetric Badge
    Chapter 76 Process of Ultrasonic Machining
  67. Altmetric Badge
    Chapter 77 Chemical Mechanical Machining Process
  68. Altmetric Badge
    Chapter 78 Process of Biological Machining
  69. Altmetric Badge
    Chapter 79 Micro- and Bio-Rapid Prototyping Using Drop-On-Demand 3D Printing
  70. Altmetric Badge
    Chapter 80 ALD: Atomic Layer Deposition – Precise and Conformal Coating for Better Performance
  71. Altmetric Badge
    Chapter 81 Metal Casting
  72. Altmetric Badge
    Chapter 83 Product Service Supply-Chain Design
  73. Altmetric Badge
    Chapter 84 Product Characteristic Based Method for End-of-Life Product Recovery
  74. Altmetric Badge
    Chapter 85 Use of Embedded Smart Sensors in Products to Facilitate Remanufacturing
  75. Altmetric Badge
    Chapter 89 Rigid-Body Motions
  76. Altmetric Badge
    Chapter 90 Manipulator Kinematics
  77. Altmetric Badge
    Chapter 91 Manipulator Dynamics
  78. Altmetric Badge
    Chapter 92 Trajectory Planning
  79. Altmetric Badge
    Chapter 93 Motion Control
  80. Altmetric Badge
    Chapter 94 Robot Work Cell Calibration and Error Compensation
  81. Altmetric Badge
    Chapter 95 Actuation
  82. Altmetric Badge
    Chapter 96 Grippers and End-Effectors
  83. Altmetric Badge
    Chapter 98 Simulation and Offline Programming for Contact Operations
  84. Altmetric Badge
    Chapter 99 Parallel Robots
  85. Altmetric Badge
    Chapter 100 Modular Robots
  86. Altmetric Badge
    Chapter 101 Cable-Driven Robots
  87. Altmetric Badge
    Chapter 102 Compliant Manipulators
  88. Altmetric Badge
    Chapter 103 Autonomous In-door Vehicles
  89. Altmetric Badge
    Chapter 104 Pricing Strategies of Remanufacturing Business with Replacement Purchase
  90. Altmetric Badge
    Chapter 105 Robotic Assembly
  91. Altmetric Badge
    Chapter 106 Robotic Welding
  92. Altmetric Badge
    Chapter 107 Robotic Finishing
  93. Altmetric Badge
    Chapter 108 Force Control
  94. Altmetric Badge
    Chapter 111 Diesel Engine Block Remanufacturing: Life Cycle Assessment
  95. Altmetric Badge
    Chapter 112 Remanufacturing and Remaining Useful Life Assessment
  96. Altmetric Badge
    Chapter 113 Manipulator Velocities and Static Forces
  97. Altmetric Badge
    Chapter 115 Computer Aided Angular Tolerance Charting System: Implementation
  98. Altmetric Badge
    Chapter 116 Resource Scalability in Networked Manufacturing System: Social Network Analysis Social network analysis Based Approach
  99. Altmetric Badge
    Chapter 117 Process Plan and Scheduling Integration for Networked Manufacturing Using Mobile-Agent Based Approach Mobile-agent
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
5 X users
facebook
2 Facebook pages

Citations

dimensions_citation
93 Dimensions

Readers on

mendeley
906 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Handbook of Manufacturing Engineering and Technology
Published by
Springer London, January 2015
DOI 10.1007/978-1-4471-4670-4
ISBNs
978-1-4471-4669-8, 978-1-4471-4670-4
Editors

Andrew Y. C. Nee

X Demographics

X Demographics

The data shown below were collected from the profiles of 5 X users who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 906 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Portugal 2 <1%
Netherlands 2 <1%
United Kingdom 2 <1%
Korea, Republic of 1 <1%
Italy 1 <1%
Finland 1 <1%
Sweden 1 <1%
Canada 1 <1%
Singapore 1 <1%
Other 3 <1%
Unknown 891 98%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 170 19%
Student > Master 157 17%
Student > Bachelor 104 11%
Researcher 64 7%
Student > Doctoral Student 62 7%
Other 128 14%
Unknown 221 24%
Readers by discipline Count As %
Engineering 434 48%
Materials Science 86 9%
Chemistry 22 2%
Environmental Science 13 1%
Chemical Engineering 13 1%
Other 70 8%
Unknown 268 30%