↓ Skip to main content

Safety, Reliability and Risks Associated with Water, Oil and Gas Pipelines

Overview of attention for book
Cover of 'Safety, Reliability and Risks Associated with Water, Oil and Gas Pipelines'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 General Approaches of Pipeline Defect Assessment
  3. Altmetric Badge
    Chapter 2 Application of Sintap to the Failure Assessment of Gas Pipes
  4. Altmetric Badge
    Chapter 3 Interaction between Material Properties, Inspection Accuracy and Defect Acceptance Levels in Strain Based Pipeline Design
  5. Altmetric Badge
    Chapter 4 Failure of Cylindrical Shells: Numerical and Experimental Study
  6. Altmetric Badge
    Chapter 5 Leak Detection by Using the Impedance Method
  7. Altmetric Badge
    Chapter 6 Corrosion Fatigue Cracking and Failure Risk Assessment of Pipelines
  8. Altmetric Badge
    Chapter 7 Initiation of Stress Corrosion Cracking and Hydrogen-Induced Cracking in Oil and Gas Line-Pipe Steels
  9. Altmetric Badge
    Chapter 8 Failure Analysis of Polyethylene Gas Pipes
  10. Altmetric Badge
    Chapter 9 Stable and Unstable Crack Growth in Pipes
  11. Altmetric Badge
    Chapter 10 Some Insights into the Fatigue Crack Propagation in Tubes Under Internal Pressure — Proposition of Predicting Models
  12. Altmetric Badge
    Chapter 11 Hydrogen Effect on Fatigue Life of a Pipe Steel
  13. Altmetric Badge
    Chapter 12 The Experience on Safety, Reliability and Risk Assessment of Some Ukrainian, Russian and Latvian Transite Pipe Lines
  14. Altmetric Badge
    Chapter 13 Reliability Assessment of Pipelines using Phimeca Software
  15. Altmetric Badge
    Chapter 14 On a New Software Project for Welding Simulations of Pipes (Fabrication, Repairs) and for the Evaluation of Fatigue Behaviour of Pipes in Service
  16. Altmetric Badge
    Chapter 15 Welded Penstock, Produced of High-Strength Steel and Application of Fracture Mechanics Parameters to Structural Integrity Assessment
  17. Altmetric Badge
    Chapter 16 The Thermal and Mechanical Behavior of a Joint Pipe System Calculated by Finite Element Method
  18. Altmetric Badge
    Chapter 17 Degradation of the Physical and Mechanical Properties of Pipeline Material Depending on Exploitation Term
  19. Altmetric Badge
    Chapter 18 Deformation Characteristics of Carbon Steels Under High Temperatures
  20. Altmetric Badge
    Chapter 19 Fracture Mechanics Analysis of Repairing a Cracked Pressure Pipe with a Composite Sleeve
  21. Altmetric Badge
    Chapter 20 Review of Gas Transmission Pipeline Repair Methods
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

patent
1 patent

Citations

dimensions_citation
23 Dimensions

Readers on

mendeley
37 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Safety, Reliability and Risks Associated with Water, Oil and Gas Pipelines
Published by
Springer, Dordrecht, January 2008
DOI 10.1007/978-1-4020-6526-2
ISBNs
978-1-4020-6524-8, 978-1-4020-6526-2
Editors

Guy Pluvinage, Mohamed Hamdy Elwany

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 37 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
United States 1 3%
Unknown 36 97%

Demographic breakdown

Readers by professional status Count As %
Student > Master 9 24%
Student > Ph. D. Student 7 19%
Researcher 4 11%
Student > Bachelor 3 8%
Student > Doctoral Student 2 5%
Other 2 5%
Unknown 10 27%
Readers by discipline Count As %
Engineering 15 41%
Materials Science 3 8%
Environmental Science 1 3%
Earth and Planetary Sciences 1 3%
Business, Management and Accounting 1 3%
Other 2 5%
Unknown 14 38%