↓ Skip to main content

Characterization of Minerals, Metals, and Materials 2017

Overview of attention for book
Cover of 'Characterization of Minerals, Metals, and Materials 2017'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Charpy Toughness Behavior of Fique Fabric Reinforced Polyester Matrix Composites
  3. Altmetric Badge
    Chapter 2 Comparative Analysis of Curaua Fiber Density Using the Geometric Characterization and Pycnometry Technique
  4. Altmetric Badge
    Chapter 3 Izod Impact Test in Polyester Matrix Composites Reinforced with Blanket of the Malva and Jute Fibers
  5. Altmetric Badge
    Chapter 4 Tensile Behavior of Epoxy Matrix Composites Reinforced with Eucalyptus Fibers
  6. Altmetric Badge
    Chapter 5 The Dimensional Characterization of Jute Fabric Strips for Reinforcement in Composite Polymeric
  7. Altmetric Badge
    Chapter 6 Izod Toughness Behavior of Continuous Palf Fibers Reinforced Polyester Matrix Composites
  8. Altmetric Badge
    Chapter 7 Mechanical, Thermal, Morphology and Barrier Properties of Flexible Film Based on Polyethylene-Ethylene Vinyl Alcohol Blend Reinforced with Graphene Oxide
  9. Altmetric Badge
    Chapter 8 Radiation Effects on Crosslinking of Butyl Rubber Compounds
  10. Altmetric Badge
    Chapter 9 Effect of Skin-Core Hierarchical Structure on Dielectric Constant of Injection Molded and Cast Film Extruded Liquid Crystalline Polymer
  11. Altmetric Badge
    Chapter 10 Aging Behaviour in Ni0.5CoxMn2.5−xO4 (x = 0.5, 0.8 and 1.1) Thermistors
  12. Altmetric Badge
    Chapter 11 Adsorption of Lead from Aqueous Solutions to Bentonite and Composite
  13. Altmetric Badge
    Chapter 12 Characterization of Low-Zinc Electric Arc Furnace Dust
  14. Altmetric Badge
    Chapter 13 Gamma-Radiation Effect on Biodegradability of Synthetic PLA Structural Foams PP/HMSPP Based
  15. Altmetric Badge
    Chapter 14 Study of Flexible Films Prepared from PLA/PBAT Blend and PLA E-Beam Irradiated as Compatibilizing Agent
  16. Altmetric Badge
    Chapter 15 Synthesis of ZnO Micro Prisms on Glass Substrates by the Spray Pyrolysis Method
  17. Altmetric Badge
    Chapter 16 Electrical and Microstructural Investigation of Ni0.5Co0.5Cu0.3Zn0.3Mn1.4O4 Temperature Sensors
  18. Altmetric Badge
    Chapter 17 Enhanced Physical Properties of Thin Film Nanocomposites
  19. Altmetric Badge
    Chapter 18 A Study on the Size and Type of Inclusions in Si–Mn Combined Deoxidated Low Carbon Steel Strip
  20. Altmetric Badge
    Chapter 19 Effect of Argon Gas Purging of Spark Plasma Sintered ZrB2+SiC Nano-Powder Composites
  21. Altmetric Badge
    Chapter 20 Investigating the Anisotropic Behaviour of Lean Duplex Stainless Steel 2101
  22. Altmetric Badge
    Chapter 21 Microstructural Investigation and Impact Testing of Additive Manufactured TI-6AL-4V
  23. Altmetric Badge
    Chapter 22 Synthesis of TiN Nano-Composite Powder by High-Energy Ball Milling of TiH2 Under Nitrogen Atmosphere
  24. Altmetric Badge
    Chapter 23 Application of AFM in Morphology Determination of Powder Material
  25. Altmetric Badge
    Chapter 24 Effects of Thermal Processing on Closed-Cell Aluminium Foams
  26. Altmetric Badge
    Chapter 25 Experimental Investigation of Mechanical Behaviour of Closed-Cell Aluminium Foams Under Drop Weight Impact
  27. Altmetric Badge
    Chapter 26 Deformation Mechanisms of Closed Cell-Aluminium Foams During Drop Weight Impact
  28. Altmetric Badge
    Chapter 27 Industrial Use of Brazilian Bentonite Modified by Mild Acid Attack
  29. Altmetric Badge
    Chapter 28 Mullitization Characteristics and Sinterability of Kyanite in Ceramic Preparation
  30. Altmetric Badge
    Chapter 29 Ore Dressing and Technological Characterization of Palygorskite from Piauí/Brazil for Application as Adsorbent of Heavy Metals
  31. Altmetric Badge
    Chapter 30 Technological Characterization of Waste from Gold Mining Dam
  32. Altmetric Badge
    Chapter 31 Synthesis and Characterization of Sodalite and Cancrinite from Kaolin
  33. Altmetric Badge
    Chapter 32 Effect of Alumina and Magnesia on Microstructure and Mineralogy of Iron Ore Sinter
  34. Altmetric Badge
    Chapter 33 Isothermal Reduction Kinetics of CaO·2Fe2O3 by Thermogravimetric Analysis
  35. Altmetric Badge
    Chapter 34 Phase Transformation of MnO2 and Fe2O3 Briquettes Roasted Under CO–CO2 Atmospheres
  36. Altmetric Badge
    Chapter 35 Contact Angle of Iron Ore Particles with Water: Measurements and Influencing Factors
  37. Altmetric Badge
    Chapter 36 Important Factors to Consider in FIB Milling of Crystalline Materials
  38. Altmetric Badge
    Chapter 37 Corrosion Behavior of Super-Ferritic Stainless Steels in NaCl Media
  39. Altmetric Badge
    Chapter 38 Effect of Bromide Ions on the Pitting Corrosion of Hafnium in Anhydrous t-Butanol and Acetonitrile
  40. Altmetric Badge
    Chapter 39 Compression Behaviour of Semi-closed Die Forged AZ80 Extrusion
  41. Altmetric Badge
    Chapter 40 Nondestructive Characterization of Microstructures of Heat-Treated Steels by Magnetic Barkhausen Noise Technique
  42. Altmetric Badge
    Chapter 41 Development of a New Recycling Process of PGM from Metal-Supported Catalyst Using Complex Oxide
  43. Altmetric Badge
    Chapter 42 High Thermal Conducting Composites Using Percolation Theory
  44. Altmetric Badge
    Chapter 43 Sorption Characteristics of Low Density Polyethylene/Kola Nut Composite
  45. Altmetric Badge
    Chapter 44 Residual Stress Analysis Within Steel Encapsulated Metal Matrix Composites Via Neutron Diffraction
  46. Altmetric Badge
    Chapter 45 Tensile Behavior of Epoxy Matrix Composites Reinforced with Pure Ramie Fabric
  47. Altmetric Badge
    Chapter 46 Hemp Fiber Density Using the Pycnometry Technique
  48. Altmetric Badge
    Chapter 47 Preparation and Characterization of Clay Exfoliation and Vegetal Fibre on Properties of Recycled Low Density Polyethylene
  49. Altmetric Badge
    Chapter 48 Estimation of Dislocation Density in Metals from Hardness Measurements
  50. Altmetric Badge
    Chapter 49 Interfacial Strength Characterization in a High-Modulus Low-Density Steel-Based Fe-TiB2 Composite
  51. Altmetric Badge
    Chapter 50 Leaching of Copper–Cobalt Tailings from Democratic Republic of Congo
  52. Altmetric Badge
    Chapter 51 Optimum Operating Conditions and Characterisation of Lignin Extracted from Palm Fruit Bunch
  53. Altmetric Badge
    Chapter 52 Selection on the Process of Enriching Gold by Smelting from Refractory Gold Ores
  54. Altmetric Badge
    Chapter 53 Selection on the Process for Removing and Recovering Antimony from Antimonial Refractory Gold Ores
  55. Altmetric Badge
    Chapter 54 Upgrading of Copper and Cobalt from the Democratic Republic of Congo Tailings
  56. Altmetric Badge
    Chapter 55 Characterization of Spent Printed Circuit Boards from Computers
  57. Altmetric Badge
    Chapter 56 Study of the Effect of the Initial Nucleation Mechanism of Lead Anode Oxidation Film on Internal Stress in Chromic Acid Electrolyte
  58. Altmetric Badge
    Chapter 57 Addition of Cellulose Nanofibers in Reactive Powder Concrete
  59. Altmetric Badge
    Chapter 58 Advanced Ion Column Solution for Low Ion Damage Characterization and Ultra-Fine Process
  60. Altmetric Badge
    Chapter 59 Application of Membrane Separation Technology in Wastewater Treatment of Iron and Steel Enterprise
  61. Altmetric Badge
    Chapter 60 Brillouin Scattering Study on Elastic Properties of Bulk hcp ZnO Single Crystal
  62. Altmetric Badge
    Chapter 61 Characteristics of Stamp Charging Coke and Top Charging Coke
  63. Altmetric Badge
    Chapter 62 Characterization and Leaching Proposal of Ag(I) from a Zn Concentrate in an S2O3 2−-O2 Medium
  64. Altmetric Badge
    Chapter 63 Mechanical Properties and Behavior of Additive Manufactured Stainless Steel 316L
  65. Altmetric Badge
    Chapter 64 Characterization of Mercury Jarosite
  66. Altmetric Badge
    Chapter 65 Characterization of Steel Production Dust and Their Use in Structural Ceramics
  67. Altmetric Badge
    Chapter 66 Charpy Toughness Behavior of Jute Fabric Reinforced Polyester Matrix Composites
  68. Altmetric Badge
    Chapter 67 Chemical and Mineralogical Characterization of a Mixed Sulphide Ore at Zimapan, Hidalgo, Mexico
  69. Altmetric Badge
    Chapter 68 Contribution to the β Relaxation Study of the HDPE, LDPE and LLDPE
  70. Altmetric Badge
    Chapter 69 Determination of Ten Impurity Elements in Tin Concentrate and Smelting Products by ICP-AES
  71. Altmetric Badge
    Chapter 70 Effects of Wet Grinding on the Structure and Granularity of Biological Origin Aragonite and Its Polymorphic Transformation into Calcite
  72. Altmetric Badge
    Chapter 71 Evaluation of Ballistic Armor Behavior with Epoxy Composite Reinforced with Malva Fibers
  73. Altmetric Badge
    Chapter 72 Evaluation of the Pozzolanic Activity of Residue From the Paper Industry
  74. Altmetric Badge
    Chapter 73 Evaluation of the Properties of the Adhesive Mortar in the Fresh State with Addition of Glass Waste
  75. Altmetric Badge
    Chapter 74 Experimental Evaluation of the Influence of Mortar’s Mechanical Properties on the Behavior of Clay Masonry
  76. Altmetric Badge
    Chapter 75 Influence of Operation Conditions on Normal Stress and Flow Pattern of Burden Materials in Blast Furnace Based on Discrete Element Method
  77. Altmetric Badge
    Chapter 76 Polymer Blend Based on Recycled Polyethylene and Ethylene Vinyl Acetate Copolymers Reinforced with Natural Fibers from Agricultural Wastes
  78. Altmetric Badge
    Chapter 77 Preliminary Study of the Effect of Stirring Rate, Temperature and Oxygen Pressure on the Leach Rate of Copper Powder, Generated by Grinding of Printed Circuit Boards of Computer
  79. Altmetric Badge
    Chapter 78 Preparation and Characterization of Polyethylene Nanocomposites with Clay and Silver Nanoparticles
  80. Altmetric Badge
    Chapter 79 Production of Concrete Interlocking Blocks with Partial Replacement of Sand in Bulk by Waste Glass Machined
  81. Altmetric Badge
    Chapter 80 Reactive Powder Concrete Production with the Addition of Granite Processing Waste
  82. Altmetric Badge
    Chapter 81 Research on the Reason of the Different Type of Chloride Forming in the Process of Blast Furnace Ironmaking
  83. Altmetric Badge
    Chapter 82 Stress and Deformation Analysis of Hot Blast Stove Piping System
  84. Altmetric Badge
    Chapter 83 Stress and Deformation Analysis of Top Combustion Hot Blast Stove Shell
  85. Altmetric Badge
    Chapter 84 Study of Calcined Mixtures from Industrial Residues for Production of Agglomerates
  86. Altmetric Badge
    Chapter 85 Study of Synergistic Effect of Light Stabilizer Additive, Conventional and Nanoparticles, Applied to Polyethylene Films Submitted to Ultraviolet Radiation
  87. Altmetric Badge
    Chapter 86 Study of the Effect of Surface Liquid Flow During Column Flotation of Mining Tailing of the Dos Carlos Dam
  88. Altmetric Badge
    Chapter 87 Study on Bending Test on Concrete Structural Use Crumb Rubber as Substitute in Fine Aggregate
  89. Altmetric Badge
    Chapter 88 Synthesis and Structural Characterization of BaTiO3 Doped with Gd3+
  90. Altmetric Badge
    Chapter 89 Texture Analysis and Anisotropic Properties of a Rolled CuZn36 Brass Alloy
  91. Altmetric Badge
    Chapter 90 The Influence of Titanium Content on the Sinter Ore Phase Structure and the Crack
  92. Altmetric Badge
    Chapter 91 The Use of Network Simplex Method for Planning the Incorporation of Recycled Paper Mill Sludge in Manufacturing of Ceramic Bodies
  93. Altmetric Badge
    Chapter 92 Use of Alkaline Solid Wastes from Kraft Pulp and Paper Mills, Dregs and Grits in Cement Production
  94. Altmetric Badge
    Chapter 93 Wood-to-Concrete Joints Using Steel Connectors: Experimental Evaluation
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Citations

dimensions_citation
13 Dimensions

Readers on

mendeley
5 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Characterization of Minerals, Metals, and Materials 2017
Published by
Springer, March 2017
DOI 10.1007/978-3-319-51382-9
ISBNs
978-3-31-951382-9, 978-3-31-951381-2
Editors

Shadia Ikhmayies, Bowen Li, John S. Carpenter, JIan Li, Jiann-Yang Hwang, Sergio Neves Monteiro, Donato Firrao, Mingming Zhang, Zhiwei Peng, Juan P. Escobedo-Diaz, Chenguang Bai, Yunus Eren Kalay, Ramasis Goswami, Jeongguk Kim

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 5 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 5 100%

Demographic breakdown

Readers by professional status Count As %
Unspecified 1 20%
Other 1 20%
Professor > Associate Professor 1 20%
Student > Postgraduate 1 20%
Student > Ph. D. Student 1 20%
Other 0 0%
Readers by discipline Count As %
Unspecified 2 40%
Physics and Astronomy 1 20%
Materials Science 1 20%
Engineering 1 20%