↓ Skip to main content

TMS 2018 147th Annual Meeting

Overview of attention for book
Cover of 'TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 2-D Nanosheets and Rod-Like WO3 Obtained via Chemical Precipitation Method for Detecting Formaldehyde
  3. Altmetric Badge
    Chapter 2 Electrochemical Fabrication of Micro/Nanoporous Copper by Electrosynthesis-Dealloying of Cu–Zn Alloy in Deep Eutectic Solvent
  4. Altmetric Badge
    Chapter 3 Electrosynthesis of CuNPs from e-Waste
  5. Altmetric Badge
    Chapter 4 Experimental Investigation of the Effect of ZnO-Citrus sinensis Nano-additive on the Electrokinetic Deposition of Zinc on Mild Steel in Acid Chloride
  6. Altmetric Badge
    Chapter 5 Obtaining of Iron Nanoparticles (Fe NP’s) for Treatment of Water Contaminated with As
  7. Altmetric Badge
    Chapter 6 Synthesis of Gold Nanoparticles Using the Extract of Sedum praealtum and Its Deposition on a Ceramic Substrate
  8. Altmetric Badge
    Chapter 7 Effects of Ce Addition on the Microstructure and Mechanical Properties of Accident-Tolerance Fe-Cr-Al Fuel Cladding Materials
  9. Altmetric Badge
    Chapter 8 Evaluation of the Mechanical Properties of 15Cr-5Ni Stainless Steel Produced by Direct Metal Laser Sintering
  10. Altmetric Badge
    Chapter 9 Creep and Thermomechanical Fatigue of Functionally Graded Inconel 718 Produced by Additive Manufacturing
  11. Altmetric Badge
    Chapter 10 Defect Detection in LENS AM Using In Situ Thermal Camera Process Monitoring
  12. Altmetric Badge
    Chapter 11 Studying Hydrogen Embrittlement in Nano-twinned Polycrystalline Fe-12.5Mn-1.2C Austenitic Steel
  13. Altmetric Badge
    Chapter 12 Non-metallic Inclusion and Their Effect on Fatigue Strength for Case-Hardened Carbon Steel in Gears
  14. Altmetric Badge
    Chapter 13 Influence of Austenitizing Temperature and Time on Microstructure and Mechanical Properties of an YP460 Grade Crack Arrest Steel
  15. Altmetric Badge
    Chapter 14 The Evolution of Microstructure of an High Ni HSLA X100 Forged Steel Slab by Thermomechanical Controlled Processing
  16. Altmetric Badge
    Chapter 15 Effects of Matrix Microstructure on the Nanoscale Precipitation and Precipitation Strengthening in an Ultra-high Strength Steel
  17. Altmetric Badge
    Chapter 16 The Technology Study of Silicon Reduction of Chromite Powder in Microwave Field
  18. Altmetric Badge
    Chapter 17 Influence of Co-doping on the Crystal Structure, Magnetocaloric Properties and Elastic Moduli of the La(Fe, Si)13 Compound
  19. Altmetric Badge
    Chapter 18 Mass Transfer in High-Temperature Laser Confocal Microscopy
  20. Altmetric Badge
    Chapter 19 Current State Art of Hot Thermocouple Technology—Novel Way for the Study of Mold Flux High-Temperature Properties
  21. Altmetric Badge
    Chapter 20 Dislocation-Based Finite Element Modelling of Hydrogen Embrittlement in Steel Alloys
  22. Altmetric Badge
    Chapter 21 Comparative Study on Corrosion Behavior of WE33 in Immersion and Polarization Influenced by Heat Treatment
  23. Altmetric Badge
    Chapter 22 Metal Injection Molding (MIM) of Mg-Alloys
  24. Altmetric Badge
    Chapter 23 Microstructure and Mechanical Properties of Mg-Gd Alloys as Biodegradable Implant Materials
  25. Altmetric Badge
    Chapter 24 Study on Polylactide-Coconut Fibre for Biomedical Applications
  26. Altmetric Badge
    Chapter 25 Visualization of Implant Failure by Synchrotron Tomography
  27. Altmetric Badge
    Chapter 26 3D Full-Field Mechanical Measurement of a Shoulder Bone Under Implant Loading
  28. Altmetric Badge
    Chapter 27 The Influence of Plastic Deformation Mechanisms on the Adhesion Behavior and Collagen Formation in Osteoblast Cells
  29. Altmetric Badge
    Chapter 28 Probabilistic Modeling and Simulation of Microstructural Evolution in Zr Based Bulk Metallic Glass Matrix Composites During Solidification
  30. Altmetric Badge
    Chapter 29 The Adhesion Force in Nano-Contact During Approaching and Retrieving Processes
  31. Altmetric Badge
    Chapter 30 Atomistic Simulations of Carbon Diffusion and Segregation in α-Iron Grain Boundaries
  32. Altmetric Badge
    Chapter 31 Microstructure Prediction for TMW-4M3 During Heat Treatment
  33. Altmetric Badge
    Chapter 32 Study on the Effect of Die Coating Thickness on the Interfacial Heat Transfer Coefficient in Squeeze Casting of Aluminum Alloy
  34. Altmetric Badge
    Chapter 33 Study on the Effect of Applied Pressure on Directional Dendritic Growth by In-Situ Observation
  35. Altmetric Badge
    Chapter 34 Modeling of Solute-Dependent Fluidity and Hot Tearing Sensitivity of Conductive Aluminum Alloys
  36. Altmetric Badge
    Chapter 35 Coupling Void Coalescence Criteria in Finite Element Models: Application to Tensile Test
  37. Altmetric Badge
    Chapter 36 Design of a New Multi-element Beta Titanium Alloy Based on d-Electron Method
  38. Altmetric Badge
    Chapter 37 Effects of Oxygen on the Density of States and Elastic Properties of Hafnium—First Principles Calculations
  39. Altmetric Badge
    Chapter 38 Morphological Study of Dispersion Phases in Heterogeneous Waste Form Materials for Efficient Nuclear Waste Containment
  40. Altmetric Badge
    Chapter 39 Compare the Energies of Different Structures in Aluminium Electrochemical Cell
  41. Altmetric Badge
    Chapter 40 Manganese Influence on Equilibrium Partition Coefficient and Phase Transformation in Peritectic Steel
  42. Altmetric Badge
    Chapter 41 Mathematical Modeling on the Fluid Flow and Desulfurization During KR Hot Metal Treatment
  43. Altmetric Badge
    Chapter 42 In-situ Characterization of Microstructural Damage in QP980 Steel
  44. Altmetric Badge
    Chapter 43 Prediction of Incipient Melting Map and γ’ Features of Ni-Base Superalloys Using Molecular Orbital Method
  45. Altmetric Badge
    Chapter 44 Mechanical Properties and Shear Localization of High Entropy Alloy CoCrFeMnNi Prepared by Powder Metallurgy
  46. Altmetric Badge
    Chapter 45 Effect of Phase Transformation on High Temperature Dynamic Flow Stresses of CP-Ti
  47. Altmetric Badge
    Chapter 46 Shock-Induced Mechanical Response and Substructural Evolution of Ti–6Al–4V Alloy
  48. Altmetric Badge
    Chapter 47 The Use of Circumferentially Notched Tension (CNT) Specimen for Fracture Toughness Assessment of High Strength Steels
  49. Altmetric Badge
    Chapter 48 A Low-Cost, Laboratory-Scale Method to Identify Regions of Microstructural Changes in Response to Dynamic Loading Conditions
  50. Altmetric Badge
    Chapter 49 Environment-Induced Degradation in Maraging Steel Grade 18Ni1700
  51. Altmetric Badge
    Chapter 50 Thermal Fatigue Behavior of High Cr Roller Steel
  52. Altmetric Badge
    Chapter 51 Influence of Cold Spray on the Enhancement of Corrosion Fatigue of the AZ31B Cast Mg Alloy
  53. Altmetric Badge
    Chapter 52 High Temperature Cracking Damage of Calcium Aluminate Cements
  54. Altmetric Badge
    Chapter 53 On the Experimental Evaluation of the Fracture Toughness of Shape Memory Alloys
  55. Altmetric Badge
    Chapter 54 Inoculation in Lab Scale Low Alloyed Steel Castings
  56. Altmetric Badge
    Chapter 55 Phase-Field Modelling of Intermetallic Solidification
  57. Altmetric Badge
    Chapter 56 Analysis of Formability of Glassy Alloys by Surface Heating Under Convective Conditions
  58. Altmetric Badge
    Chapter 57 Study on the Formation and Control of TiN Inclusion in Mushy Zone for High Ti Microalloyed Steel
  59. Altmetric Badge
    Chapter 58 Additive Manufacturing of Epoxy Resin Matrix Reinforced with Magnetic Particles
  60. Altmetric Badge
    Chapter 59 Admixture Optimization in Concrete Using Superplasticizers
  61. Altmetric Badge
    Chapter 60 Influence of Cold Spray on the Microstructure and Residual Stress of Resistance Spot Welded Steel-Mg
  62. Altmetric Badge
    Chapter 61 Development of Oxidation Resistant Refractory High Entropy Alloys for High Temperature Applications: Recent Results and Development Strategy
  63. Altmetric Badge
    Chapter 62 First-Principles Calculations of Stacking Fault Energies in Quinary High-Entropy Alloy Systems
  64. Altmetric Badge
    Chapter 63 Synthesis of FeCrVNbMn High Entropy Alloy by Mechanical Alloying and Study of their Microstructure and Mechanical Properties
  65. Altmetric Badge
    Chapter 64 Magnesium-Based Metal Matrix Nanocomposites—Processing and Properties
  66. Altmetric Badge
    Chapter 65 Investigation of Tin as a Fuel Additive to Control FCCI
  67. Altmetric Badge
    Chapter 66 Mechanical Properties of Rapidly Solidified Ni5Ge3 Intermetallic
  68. Altmetric Badge
    Chapter 67 Production of Cu2O Powder Using Electrodeposition Method
  69. Altmetric Badge
    Chapter 68 Alumina Feeding System Changes in Aluminum Electrochemical Cell with D18 Technology for Energy Efficiency (Case Study: Almahdi-Hormozal Aluminum Smelter)
  70. Altmetric Badge
    Chapter 69 Hot Ductility of X70 Pipeline Steel in Continuous Casting
  71. Altmetric Badge
    Chapter 70 Ductile Fracture Assessment of 304L Stainless Steel Using 3D X-ray Computed Tomography
  72. Altmetric Badge
    Chapter 71 Thermo-Calc of the Phase Diagrams of the Nb-N System
  73. Altmetric Badge
    Chapter 72 Development of Novel Squeeze Cast High Tensile Strength Al–Si–Cu–Ni–Sr Alloys
  74. Altmetric Badge
    Chapter 73 Carbon Nanocomposite for Reliable Seal Applications in High-Temperature, High-Pressure, Corrosive Environments
  75. Altmetric Badge
    Chapter 74 The Dielectric Behavior in Reduced Graphene Oxide/Polymer Composites with a Segregated Structure
  76. Altmetric Badge
    Chapter 75 Solid State Phase Transformation Mechanism in High Carbon Steel Under Compressive Load and with Varying Cr Percent
  77. Altmetric Badge
    Chapter 76 Microstructure Characterization of Aged Heat Resistant Steels
  78. Altmetric Badge
    Chapter 77 Sublimation and Self Freezing of Planar Surfaces in Rarefied Atmospheres
  79. Altmetric Badge
    Chapter 78 Effect of Precipitation on Creep Properties of Ferritic Steels
  80. Altmetric Badge
    Chapter 79 Microstructural Evolution of a New Beta Titanium Alloy During the Beta Annealing, Slow Cooling and Aging Process
  81. Altmetric Badge
    Chapter 80 A Review of the Preparation Methods of WC Powders
  82. Altmetric Badge
    Chapter 81 Influence of Hot Rolling on Mechanical Behavior and Strengthening Mechanism in Boron Carbide Reinforced Aluminum Matrix Composites
  83. Altmetric Badge
    Chapter 82 Preparation of Titanium Foams with Uniform and Fine Pore Characteristics Through Powder Metallurgy Route Using Urea Particles as Space Holder
  84. Altmetric Badge
    Chapter 83 Leaching Characteristics of Non Ferrous Metals Recovery from Korean Municipal Solid Waste Incineration Bottom Ash Samples
  85. Altmetric Badge
    Chapter 84 Anti-corrosion Properties of Rosemary Oil and Vanillin on Low Carbon Steel in Dilute Acid Solutions
  86. Altmetric Badge
    Chapter 85 Stainless Steel Corrosion Resistance in 0.5 M H2SO4 Using Cassia fistula Extract
  87. Altmetric Badge
    Chapter 86 Synergistic Effect of Benzonitrile and Benzothiazole on the Corrosion Inhibition of 316 Stainless Steel in 6M HCl Solution
  88. Altmetric Badge
    Chapter 87 Corrosion Resistance of Aluminium in 0.5 M H2SO4 in the Presence of Cassia fistula Extract
  89. Altmetric Badge
    Chapter 88 Pt Decorating Effect on CNT Surface Towards Adsorption of SF6 Decomposed Components
  90. Altmetric Badge
    Chapter 89 “In Situ” Measurement of Electrical Resistivity, Dilatometry and Thermal Analysis of Cast Iron
  91. Altmetric Badge
    Chapter 90 Mechanical Properties of Ultrafine Grain 2519 Aluminum Alloy
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
3 X users

Citations

dimensions_citation
11 Dimensions

Readers on

mendeley
96 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings
Published by
Springer, Cham, January 2018
DOI 10.1007/978-3-319-72526-0
ISBNs
978-3-31-972525-3, 978-3-31-972526-0
Editors

The Minerals, Metals & Materials Society

X Demographics

X Demographics

The data shown below were collected from the profiles of 3 X users who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 96 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 96 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 5 5%
Student > Master 3 3%
Student > Doctoral Student 2 2%
Student > Bachelor 1 1%
Researcher 1 1%
Other 0 0%
Unknown 84 88%
Readers by discipline Count As %
Materials Science 6 6%
Engineering 4 4%
Unknown 86 90%