↓ Skip to main content

Proceedings of the 8 th Pacific Rim International Congress on Advanced Materials and Processing

Overview of attention for book
Cover of 'Proceedings of the 8 th Pacific Rim International Congress on Advanced Materials and Processing'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Research and Production of Heavy Pipeline Plate for Submarine Gas Transmission Lines at Shougang Steel
  3. Altmetric Badge
    Chapter 2 Microstructure characterization in domestically-made TP310HNbN austenitic stainless steel after creep test
  4. Altmetric Badge
    Chapter 3 Recent Niobium Developments for High Strength Steel Energy Applications
  5. Altmetric Badge
    Chapter 4 Synthesis, Chracterization and Pseudo-Capacitive Performance of MnO x /CNT Heteronanostructures
  6. Altmetric Badge
    Chapter 5 Evaluation of the Electrical Resistance and Capacitance of a Di-Electric Electro-Active Polymer
  7. Altmetric Badge
    Chapter 6 Electrochemical Performance of LiMn 0.5-X Ni 0.5-X Al 2X O 2 by Hydrothermal Method
  8. Altmetric Badge
    Chapter 7 Electrochemical Deposition of High Purity Silicon in Molten Salts
  9. Altmetric Badge
    Chapter 8 Nano Scale Energetic Materials: Theoretical and Experimental Updates
  10. Altmetric Badge
    Chapter 9 First Principles Studies of Mechanical Properties of Thoria
  11. Altmetric Badge
    Chapter 10 Characterization of the Crystallographic Textures and Mechanical Anisotropy Factors in Two Modifications of Zr-2.5Nb Pressure Tube Materials
  12. Altmetric Badge
    Chapter 12 Hydrogen Storage Performances of Mg 20 Ni 10-X M X (M=Cu, Co, Mn; X=0–4) Alloys Prepared by Melt Spinning
  13. Altmetric Badge
    Chapter 13 Evidence for Existence and Generality of Competitive Reactions during Hydrogenation of Mg/Cu Superlaminate Composites
  14. Altmetric Badge
    Chapter 14 Torrefaction of Yacon and Jerusalem Artichoke Stems as a Contribution to the Alternative Production of Inulin
  15. Altmetric Badge
    Chapter 15 Charpy Impact Properties of ODS Ferritic Steels
  16. Altmetric Badge
    Chapter 16 Corrosion Problems in Heat Recovery for Water Heating
  17. Altmetric Badge
    Chapter 17 Diffusion Bonding of W/ODS Steel using Pure Iron Insert for Fusion Reactor Applications
  18. Altmetric Badge
    Chapter 18 Durability and Cycling Stability of Copper Coated Titania Nanotube as Anode Materials for Li-Ion Battery
  19. Altmetric Badge
    Chapter 20 Hierarchical ZnO Nano-Tree Growth for High Efficiency Solar Cell
  20. Altmetric Badge
    Chapter 22 Investigation on Corrosion Behavior of High-Level Waste Container Materials
  21. Altmetric Badge
    Chapter 23 Microstructure and Properties of Nano-Structured 9CR Oxide Dispersion Strengthened Steels Produced by Atomization and Hot Isostatic Pressing
  22. Altmetric Badge
    Chapter 24 Renewable Thermoenergetic Resources in the Pyrometallurgical Copper Production Process
  23. Altmetric Badge
    Chapter 30 Interaction of Tourmaline Mineral Powders with Sea Water and Its Anti-Microbial Properties
  24. Altmetric Badge
    Chapter 31 Aragonite Precipitated Calcium Carbonate: A New Versatile Functional Filler for Light Weight Plastic
  25. Altmetric Badge
    Chapter 32 Effect of PH on Susceptibility to Environment-Assisted Cracking of AZ31 Mg Alloy
  26. Altmetric Badge
    Chapter 33 Electrochemical Impedance Characteristics of Sintered 7075 Aluminum Alloy under SSRT Test
  27. Altmetric Badge
    Chapter 34 Novel Self-Foaming Cellular Composites Produced from Recycled Water Potabilisation Sludge
  28. Altmetric Badge
    Chapter 37 Studies on the Structures and Optical Properties of Tio 2 Doped with Transition Metals
  29. Altmetric Badge
    Chapter 40 Development of Economically Doped Heat-Resistant Nickel Single-Crystal Superalloys for Blades of Perspective Gas Turbine Engines
  30. Altmetric Badge
    Chapter 43 Friction and Wear Properties of Sintered Sulfur-Containing High-Speed Steels at Elevated Temperature
  31. Altmetric Badge
    Chapter 44 Fully Dense Fine Grained Feal-Based Intermetallics Prepared by Spark Plasma Sintering Method
  32. Altmetric Badge
    Chapter 45 Grain Growth Behavior of a Ni-Cr Based Superalloy Gh4033 in Reheating Process Prior to Hot Rolling
  33. Altmetric Badge
    Chapter 47 Influence of Alloying Elements on Deformability of High Nb Containing Tial Alloys
  34. Altmetric Badge
    Chapter 50 Microstructure Evolution and Creep Behaviors of a [111] Oriented Single Crystal Nickel-Based Superalloy
  35. Altmetric Badge
    Chapter 56 Reaction Synthesis Mechanism of TiAl Alloy Fabricated by Hot Pressed Sintering with Mixed Powders of TiH 2 and Aluminum
  36. Altmetric Badge
    Chapter 57 Study on the Strain Rate Sensitivity of a Ni-Based Superalloy
  37. Altmetric Badge
    Chapter 60 Titanium Aluminum Alloy Fabricated by Pressure Infiltration and Heat Treatment
  38. Altmetric Badge
    Chapter 62 Determination of Fracture Toughness Values of Two Ni — Base Super Alloys for High Temperature Applications
  39. Altmetric Badge
    Chapter 63 Effects of Al Addition on the High Temperature Oxidation Behavior of CM-247 LC Ni-Based Superalloy
  40. Altmetric Badge
    Chapter 65 Fracture Characteristics of a Single Crystal Nickel-Based Superalloy
  41. Altmetric Badge
    Chapter 69 Aging Precipitation and Recrystallization Behavior After Cold Compression by 10% In High-Nitrogen Austenitic Stainless Steel
  42. Altmetric Badge
    Chapter 70 Determination of α / γ Phase Boundaries in the Fe-Cr-Ni-Mn Quaternary System with a Diffusion-Multiple Method
  43. Altmetric Badge
    Chapter 72 Effect of Al Content on Tensile Deformation and Fracture Behavior Transition Due to Strain-Rate Change in Fe-Si-Al Alloys
  44. Altmetric Badge
    Chapter 73 Influence of Silicon Addition on the Low Temperature Toughness of Pressure Vessel Steels
  45. Altmetric Badge
    Chapter 74 Effect of Ferrite Grain Size on Local Elongation in a Low Carbon Steel
  46. Altmetric Badge
    Chapter 75 Evolution of Microstructures and Texture of 1.3%Si Non-Oriented Electrical Steel in the Twin-Roll Strip Casting Process
  47. Altmetric Badge
    Chapter 76 Influence of Pre-Oxidation on the Corrosion Behavior of Weathering Steel
  48. Altmetric Badge
    Chapter 77 Rusting Evolution and Anti-Corrosion Mechanism of MnCuP Weathering Steel in Simulated Atmospheres
  49. Altmetric Badge
    Chapter 78 Selective Corrosion of Stainless Steel at Low pH
  50. Altmetric Badge
    Chapter 79 Fitting and Evolution of Atmospheric Corrosion of Low Alloy Steels under Wet/Dry Cyclic Corrosion Test
  51. Altmetric Badge
    Chapter 80 Study on the Corrosion Resistance of Hot Rolled Rebar Quenched with a New Chemical Reagent
  52. Altmetric Badge
    Chapter 82 Formation of Equiaxed Crystals by Complex Inclusions during Solidification of Advanced High Strength Steel
  53. Altmetric Badge
    Chapter 84 In Situ Observation of the Microstructure Evolution in HAZ and Analysis by EBSD
  54. Altmetric Badge
    Chapter 86 Preferential Precipitation of Cementite in Ferrite under a High Magnetic Field
  55. Altmetric Badge
    Chapter 89 Influence of the Pulverized Coal Ash on Theoretical Flame Temperature Before Tuyere in BF
  56. Altmetric Badge
    Chapter 90 Removal of Phosphorus, Sulphur, and Arsenic from Ferronickel and Nickel Alloys
  57. Altmetric Badge
    Chapter 91 Molten Mold Flux Technology for Continuous Casting of the ULC and TWIP Steel
  58. Altmetric Badge
    Chapter 92 Effect of Steel Composition on the Scale Layer Composition in Continuous Casting
  59. Altmetric Badge
    Chapter 94 Development of a heat recovery system from steelmaking slag
  60. Altmetric Badge
    Chapter 95 Heat Transfer Charactaristic in a Slag Heat Recovery Chamber
  61. Altmetric Badge
    Chapter 96 Thermodynamic Analyses of Iron Oxides Redox Reactions
  62. Altmetric Badge
    Chapter 101 Q-P Process on Steels with Various Carbon and Chromium Contents
  63. Altmetric Badge
    Chapter 103 Effects of Heating Rate on the Phase Transformation Temperature of Austenite in M Steel Sheet
  64. Altmetric Badge
    Chapter 105 Equipment and Automation of Blast Furnace Ironmaking Process
  65. Altmetric Badge
    Chapter 106 Factors Affecting the Mixing Characteristics of Molten Steel in the RH Refining Process
  66. Altmetric Badge
    Chapter 107 High Speed and Stable Continuous-Casting Technique on No.4CCM in JFE Steel Corporation Kurashiki Works
  67. Altmetric Badge
    Chapter 108 High-Temperature Deformation Behavior of Carbon Steel Containing Dispersed Fine Voids
  68. Altmetric Badge
    Chapter 110 Self-Repairing of Damaged Rust Layers on Carbon Steel and Weathering Steel
  69. Altmetric Badge
    Chapter 111 Static Model for Converter Steelmaking by Using Limestone
  70. Altmetric Badge
    Chapter 112 Study for Influence of Prereduction Degree on the Softening and Melting Properties of Sinter
  71. Altmetric Badge
    Chapter 114 The Effects of Shot-Peening on Surface Residual Stress of Advanced Ultrahigh-Strength Trip-Aided Steels
  72. Altmetric Badge
    Chapter 115 The Development of Microalloyed Hot-Rolled High-Strength Auto Structural Steel with High Ti Content
  73. Altmetric Badge
    Chapter 116 The Production of Bio-Steel and its Applied Research on Watches
  74. Altmetric Badge
    Chapter 117 Zinc Distribution in Blast Furnace and its Damage Mechanism
  75. Altmetric Badge
    Chapter 118 Control of Textures in Aluminum Solid Solution Alloys by High-Temperature Deformation
  76. Altmetric Badge
    Chapter 121 Development of Advanced Aluminum Alloys with Nano-Hetero Structures and Their Mechanical Properties
  77. Altmetric Badge
    Chapter 122 Development of Al-TiC Alloys Using Powder Metallurgy as Grain Refiners for Aluminium and Its Alloys
  78. Altmetric Badge
    Chapter 123 Effect of Combined Electromagnetic Fields on the As-Casting Structure and Mechanical Property of HDC Casting 7075 Al Alloy Ingot
  79. Altmetric Badge
    Chapter 124 Effect of Heat Treatment on Fatigue Behavior and Mechanical Properties of Al 7021-T6.
  80. Altmetric Badge
    Chapter 125 Effect of Rotating Gas Bubble Stirring Treatment on the Microstructures of Semi-Solid AZ91–2Ca Alloy
  81. Altmetric Badge
    Chapter 126 Effects of Electromagnetic Field on Horizontal Continuous Casting of 6061 Aluminium Alloy Bar Process
  82. Altmetric Badge
    Chapter 128 Formability of Mg-Li Alloy Sheet by Square Cup Deep Drawing
  83. Altmetric Badge
    Chapter 130 High Strain Rate Superplasticity of a Fine-Grained AZ91 Magnesium Alloy Prepared by Friction Stir Processing
  84. Altmetric Badge
    Chapter 134 Lattice Rotation Due to Cold-Rolling on 1050 Aluminum with Near Rotated Cube Orientations
  85. Altmetric Badge
    Chapter 135 Mechanical Properties and Formability of Titanium-Clad Magnesium Alloy Sheets
  86. Altmetric Badge
    Chapter 137 Microstructural Characterization of Metastable Phases in Homogenised and Aged Mg-Nd and Mg-Gd-Nd Alloys Containing Zn, Y and Zr
  87. Altmetric Badge
    Chapter 139 Preparation of Large Scale Magnesium Alloy Billets by LFEC Processing
  88. Altmetric Badge
    Chapter 141 Relationship Between Aluminum Oxide Inclusion and Porosity in Aluminum Melt
  89. Altmetric Badge
    Chapter 143 The Effect of Ca Additions on the Mechanical Properties of Mg-Al-Sn Alloys
  90. Altmetric Badge
    Chapter 146 Age-Hardening Behavior of Deformed Excess Mg-Type Al-Mg-Si Alloys
  91. Altmetric Badge
    Chapter 147 Aging Behavior and Microstructure Observation of MgB 2 /Al-1mass%Mg 2 Si Composite Materials
  92. Altmetric Badge
    Chapter 149 Effect of Crystal Grain Orientation on Grain Boundary Fracture in Polycrystalline Al-Zn-Mg-Cu Alloy
  93. Altmetric Badge
    Chapter 150 Effect of Cu / Ag Addition on the Age-Hardening Behavior in Al-Mg-Ge Alloys
  94. Altmetric Badge
    Chapter 151 Effect of Rolling on the High Strength of 6N01 Aluminum Alloy
  95. Altmetric Badge
    Chapter 153 Effect of Si and Ca Additions on Microstructure of As-Cast Mg-Sn-Sr Alloy
  96. Altmetric Badge
    Chapter 155 Grain Refinement in Pure Mg and Mg-Zn Alloys during Hot Compression Test
  97. Altmetric Badge
    Chapter 156 Growth of the AIN and Fe-Al Intermetallic Compound Multilayer as Different Nickel Concentration
  98. Altmetric Badge
    Chapter 157 Hot Deformation Behavior of an Al-7.6Zn-1.8Mg-1.4Cu-0.12Zr Alloy
  99. Altmetric Badge
    Chapter 159 Influence of High Magnetic Field on Intermediate Phase Growth in Mg-Al Diffusion Couple
  100. Altmetric Badge
    Chapter 160 Influence of Y on the Microstructure, Mechanical Properties and Fracture Mechanism of Mg-8Li-3Zn Alloy
  101. Altmetric Badge
    Chapter 165 Microstructure Evolution of AZ91D Magnesium Alloy During Extrusion-Torsion Simultaneous Processing
  102. Altmetric Badge
    Chapter 166 Observation of Equilibrium Phase for Cu or Ag Addition Al-Mg-Si Alloys
  103. Altmetric Badge
    Chapter 167 Recovery and Recrystallization in 1050 Aluminum Alloy After Cold-Rolling at 50%
  104. Altmetric Badge
    Chapter 168 Study on the Hot Tearing Susceptibility of Mg-7Al-xCa-2Si-0.8Zn-0.5Sr-0.4Mn Heat-resistant Magnesium Alloys
  105. Altmetric Badge
    Chapter 170 Warm Deformation Behavior of Ti-6Al-4V Alloy at Strain Rate of 100s −1
  106. Altmetric Badge
    Chapter 173 An Approach to Improve the Tensile Ductility of Particle Reinforced Ultrafine-Grained Metallic Composite by Nano-Dispersion Toughening
  107. Altmetric Badge
    Chapter 174 Bulk NiTip/Al Composites Prepared by Friction Stir Processing
  108. Altmetric Badge
    Chapter 176 Fabrication of Al/Cu Composite Using Multiple Hydrostatic Extrusion Process and its Material Properties
  109. Altmetric Badge
    Chapter 177 Influence of Heat Treatment on Corrosion and Wear Resistances of Mild Steel with Ni-P-Al 2 O 3 Composite Film
  110. Altmetric Badge
    Chapter 178 Interfacial Morphology on Mechanical Behavior of Particle Reinforced Metal Matrix Composites
  111. Altmetric Badge
    Chapter 179 Interfacial Properties of Ti-6Al-4V/SCS-6 Continuous Fibre Reinforced Composite
  112. Altmetric Badge
    Chapter 181 Low-Velocity Impact Response of Sandwich Composites with FRP Facesheets and Nanoclay-Wood Flour Modified Polyurethane Foam
  113. Altmetric Badge
    Chapter 182 Manufacturing Process of Celmet Reinforced Aluminum Alloy Composite by Low-Poressure Casting
  114. Altmetric Badge
    Chapter 183 Micromechanics-Based Examination of Thermo-Mechanical Response of ZrO 2 /Ti Functionally Graded Materials Fabricated by Spark Plasma Sintering
  115. Altmetric Badge
    Chapter 184 Microstructures and Mechanical Properties of Carbon Tubes Reinforced AZ91D Magnesium Matrix Composites Prepared by Squeeze Casting
  116. Altmetric Badge
    Chapter 186 Preparation and Characterization of Diamond/Cu Composites
  117. Altmetric Badge
    Chapter 188 Role of Si in the Wetting of α-SiC by Al
  118. Altmetric Badge
    Chapter 189 Superplasitic Tensile Behavior of in Situ TiBw/Ti6Al4V Composite with Novel Network Microstructure
  119. Altmetric Badge
    Chapter 190 Synthesis and Characterization of Fluorine-Doped Tin Dioxide Nanocomposites
  120. Altmetric Badge
    Chapter 191 Synthesis and Properties of Metal Matrix Nanocomposites (MMNCS), Syntactic Foams, Self Lubricating and Self-Healing Metals
  121. Altmetric Badge
    Chapter 194 Aesthetic and Mechanical Properties of Oxide Coated Ti-Nb-Ta-Zr Alloys as a Dental Material
  122. Altmetric Badge
    Chapter 195 Mechanical Properties of Ti-12Cr Alloy with Self-Tunable Young’s Modulus for Use in Spinal Fixation Devices
  123. Altmetric Badge
    Chapter 196 Large Elastic-Like Strain in an Fe-31.2Pd (at.%) Alloy Exhibiting a Second-Order-Like FCC-FCT Martensitic Transformation
  124. Altmetric Badge
    Chapter 198 Porous Titanium Implant and Micro-CT Based Characterization of Sub-Surface Morphology
  125. Altmetric Badge
    Chapter 200 Studies on the Competitive Interaction of Glutathione with 3-Aminopropyl Trimethoxysilane-Stabilized Gold Nanoparticles
  126. Altmetric Badge
    Chapter 201 Cross Sectional TEM Observations and Elemental Mapping on Anodic Oxidation Surface Films of Titanium Alloy
  127. Altmetric Badge
    Chapter 202 Osteoblast responses to the modified surface of porous titanium
  128. Altmetric Badge
    Chapter 204 Antibacterial Ceramic Fabricated by the Ti-Bearing Blast Furnace Slag
  129. Altmetric Badge
    Chapter 205 Deformation Induced Changeable Young’s Modulus in Ternary Ti-Cr-O Alloys for Spinal Fixation Applications
  130. Altmetric Badge
    Chapter 208 Plasma Electrolytic Oxidation of Pure Magnesium for Potential Biological Application
  131. Altmetric Badge
    Chapter 210 Preparation and Optical Properties of Amorphous Sio Nanowires
  132. Altmetric Badge
    Chapter 211 Preparation of Ag-Doped Calcium Phosphates
  133. Altmetric Badge
    Chapter 213 All-Solid-State 2-Dimensional Li Battery
  134. Altmetric Badge
    Chapter 215 Hybrid Nanoscale Magnetic Composites
  135. Altmetric Badge
    Chapter 217 Magnetic, Magnetocaloric and Electrical Properties in Bulk Nanocrystalline Gd Metals
  136. Altmetric Badge
    Chapter 219 Meallization from Neodymium (III) Compound by Chemical and Electrowinning Process
  137. Altmetric Badge
    Chapter 220 Radiation Damage in GaN-Based Materials and Devices
  138. Altmetric Badge
    Chapter 221 Status and Preparation Technology of Rare Earth Materials
  139. Altmetric Badge
    Chapter 226 Recycle Rare Earth from Wastephosphor by a Two-Step Method
  140. Altmetric Badge
    Chapter 227 An Analysis of the Magnetization Behavior and Temperature Dependence of Coercivity in Hot Deformed Nd 2 Fe 14 B Magnets with Different Deformation Degrees
  141. Altmetric Badge
    Chapter 229 Magnetism and Electronic Structure Calculations of Pd-TM Alloys and Hydrogen Systems
  142. Altmetric Badge
    Chapter 232 A Study on Contact Resistance Failure Between Al-Ti-TiN Multi-Layer and W-Via Caused by Hillock Formation
  143. Altmetric Badge
    Chapter 233 Comparison in Abrasion Resistance Between Hardened 8620 Steel and Coated by Ti/TiN
  144. Altmetric Badge
    Chapter 234 Corrosion Behavior of 21%CR Ferritic Stainless Steel at Atmospheric Environment
  145. Altmetric Badge
    Chapter 236 Effect of Growth Temperature on GaN Films Deposited on Stainless Steel Substrates by ECR-PEMOCVD
  146. Altmetric Badge
    Chapter 239 Engineering Thin Film Semiconductor Gas Sensors to Increase Sensitivity and Decrease Operation Temperature
  147. Altmetric Badge
    Chapter 240 Influence of The Cu Content on the Structure and Properties of Me-Cu-N (Me=Zr,Ti) Nanocomposite Films Deposited by Pulsed Bias Arc Ion Plating
  148. Altmetric Badge
    Chapter 242 Influence of Yttrium on Microstructure and Properties of Ni-Al Alloy Coatings Prepared by Laser Cladding
  149. Altmetric Badge
    Chapter 243 Microhardness and Deformation Storage Energy Density of NiTi Thin Films
  150. Altmetric Badge
    Chapter 244 Model for Atomic Layer Deposition of Aluminum on Inner Wall of Rectangular Pipes with Large Length Aspect Ratio
  151. Altmetric Badge
    Chapter 245 Molten Salt Multi-Anode Reactive Alloy Coating (Marc) of Ta-W Alloy on Sus316l
  152. Altmetric Badge
    Chapter 246 Nanocrystalline Antimony-doped Tin Oxide Films Prepared by Sol-Gel
  153. Altmetric Badge
    Chapter 249 Study on Improving Surface Characteristics of Stainless Steel Alloys by Electropolishing
  154. Altmetric Badge
    Chapter 251 Effects of Processing Temperatures on the Characteristics of the Surface Hardened Layer Produced on Duplex Stainless Steel by Low Temperature Plasma Nitrocarburizing
  155. Altmetric Badge
    Chapter 252 Formation of Fe-Al Intermetallic Compound Film on Hot Work Tool Steel by Shot Lining and Heat Treatment
  156. Altmetric Badge
    Chapter 253 Giant Magnetoresistance of CoNi/Cu Multilayered Nanowires Electrodeposited into Anodized Aluminum Oxide Nanochannels
  157. Altmetric Badge
    Chapter 254 Interdiffusion Behavior at Interface Between NiAlHfSi Coatings and Ni 3 Al Based Superalloy Substrates
  158. Altmetric Badge
    Chapter 255 Low-Temperature Grown InN Films Based on Sapphire Substrate with ECR-Plasma Enhanced MOCVD
  159. Altmetric Badge
    Chapter 258 Prevention of Soot Deposition in Direct Carburizing by Injection of Water Vapor
  160. Altmetric Badge
    Chapter 262 Structural and Mechanical Properties of TiON Nanocomposite Films Deposited on Silicon by Pulsed Bias Arc Ion Plating
  161. Altmetric Badge
    Chapter 263 Surface Characteristics and Electric Conductivity of MWCNTS/Feve Copolymer Composite Coatings
  162. Altmetric Badge
    Chapter 264 ZnTe Compound Semiconductor Thin Films Electrodeposited from Acidic Aqueous Solution
  163. Altmetric Badge
    Chapter 266 Recent Developments in Flat Rolling Technologies
  164. Altmetric Badge
    Chapter 268 Surface Structure and Particle Analysis of Combined SnO 2 and ZnO Nanoparticles Prepared for Gas Sensing
  165. Altmetric Badge
    Chapter 270 Corrosion Analysis of Zinc Rich Epoxy Coatings on Steel in NaCl Solution
  166. Altmetric Badge
    Chapter 271 Improvement on Strength Performance of Hot Dip Galvanized 340BH Automotive Steel Sheet
  167. Altmetric Badge
    Chapter 272 Microstructure and Properties of Low Manganese API X70 Pipeline Steel for Sour Service Application
  168. Altmetric Badge
    Chapter 273 Study on Dimensional Stability of 1Cr18Ni9Ti Stainless Steel and its Mechanism
  169. Altmetric Badge
    Chapter 278 Study on the Mold Slag with High Al 2 O 3 Content for High Aluminum Steel
  170. Altmetric Badge
    Chapter 279 Influence of Heat Treatment in the Pyromet 31V Turning
  171. Altmetric Badge
    Chapter 280 On the Microstructural Optimisation of a New Polycrystalline Superalloy for Industrial Gas Turbines
  172. Altmetric Badge
    Chapter 282 Recycling Automotive Waste Glass and Plastic — an Innovative Approach
  173. Altmetric Badge
    Chapter 288 Effect of Shot Peening on Microstructure and Performance of the Fe-Cu-Ni-Mo-C Sintered Material
  174. Altmetric Badge
    Chapter 290 Fe-Ti Alloy Production from Mixed Ilmenite and Titanium Dioxide by Direct Electrolytic Reduction in Molten Calcium Chloride Electrolyte
  175. Altmetric Badge
    Chapter 291 Low Cost Precursors for In-Situ Synthesis of Composite Materials Using Plasma Transferred Arc Welding
  176. Altmetric Badge
    Chapter 293 Rheological Properties of Feedstock Composed of Titanium Alloy Powder and Polyethylene Glycol Based Binder System for Metal Injection Moulding
  177. Altmetric Badge
    Chapter 294 Derivation of Forces Acting on the Liquid Weld Metal Based on Arc Pressure Measurements Produced Using Alternating Shielding Gases in the Gtaw Process
  178. Altmetric Badge
    Chapter 297 Study of Thermal Damage Introduced by Laser Cladding Process Part 1. Existence Verification by Experiment
  179. Altmetric Badge
    Chapter 299 Corrosion Resistance Enhancement of 304 Stainless Steel Under Droplet of Chloride Solution by Mechanical Surface Treatment
  180. Altmetric Badge
    Chapter 300 Effect of Heat Treatment on the Mechanical Properties of HT9 Fuel Cladding Tube for Sodium-Cooled Fast Reactor (SFR)
  181. Altmetric Badge
    Chapter 302 Effects of B on Both Microstructure and Mechanical Property in Weld Metals in Steels
  182. Altmetric Badge
    Chapter 303 Localized Corrosion Resistance of Co-Cr Alloy in NaCl Solution
  183. Altmetric Badge
    Chapter 305 Microstructures and Electrical-Mechanical Properties of Cu-Cr-Zr and Cu-Cr-Zr-Ti Alloys Heat-treated in Hydrogen
  184. Altmetric Badge
    Chapter 310 FEM analysis of pipe reduction forming process for increasing of wall thickness
  185. Altmetric Badge
    Chapter 312 Interfacial properties of honeycomb sandwich panel produced by melt drag process
  186. Altmetric Badge
    Chapter 313 Investigation of Unusual “Sharkskin” Corrosion in Drawn Copper Pipes
  187. Altmetric Badge
    Chapter 315 Manufacture of AZ31 magnesium alloy circular tubes by cold roll forming
  188. Altmetric Badge
    Chapter 318 On the Annealing of Rapidly Solidified High Chromium-High Carbon Tool Steel
  189. Altmetric Badge
    Chapter 319 Prediction of Microporosity in Complex Thin-Wall Castings with the Dimensionless Niyama Criterion
  190. Altmetric Badge
    Chapter 320 Production of Copper alloy sheet by twin-roll casting
  191. Altmetric Badge
    Chapter 321 Real Time Observation of Interface Evolution in Al/Cu Bimetal by Synchrotron Radiation Imaging
  192. Altmetric Badge
    Chapter 323 Recrystallisation of Cold Rolled CuMgSn Alloys Produced from Thin Cast Slabs
  193. Altmetric Badge
    Chapter 324 Research on the crack mechanism of electrodes for a high-alloyed martensitic valve steel
  194. Altmetric Badge
    Chapter 325 Secondary A Phase Evolution in the Isothermal Compression and Heat Treatment of TC8 Titanium Alloy
  195. Altmetric Badge
    Chapter 326 Solidification heat transfer analysis of AZ91D cast strip by using a horizontal twin roll caster
  196. Altmetric Badge
    Chapter 327 Solidification of Iron-Rich Intermetallics in Squeeze Cast Al-5.0Cu-0.5 Fe Alloys with Different MN/Fe Ratio
  197. Altmetric Badge
    Chapter 328 Solidification Processing of Cast Energetic Materials
  198. Altmetric Badge
    Chapter 329 Stress Behavior of Incoloy 800 Superalloy in Slab Continuous Casting Process
  199. Altmetric Badge
    Chapter 330 Study on Directional Solidification Microstructures of Mg-Zn-Gd Ternary Magnesium Alloy
  200. Altmetric Badge
    Chapter 331 Interactions Between TiAl Melt and Crucibles Material during Casting Process
  201. Altmetric Badge
    Chapter 332 Preparation of High Purity Tellurium by Zone Refining Process
  202. Altmetric Badge
    Chapter 333 Solidification of Discontinuous Magnesium Borate Whisker Reinforced AA2024 Matrix Composite
  203. Altmetric Badge
    Chapter 334 The Improvement of Tensile Property for Solidified Superalloy Inconel 625
  204. Altmetric Badge
    Chapter 338 Electromagnetic Stirring of Plutonium Metal Part I: Theoretical Calculations and System Design (LA-UR-13-23071)
  205. Altmetric Badge
    Chapter 339 Kinetics Modelling of Isothermal Bainite Transformation in Low Carbon Multi-Microalloyed Steel
  206. Altmetric Badge
    Chapter 341 Quantitative phase field simulation of athermal ω transition in Ti-Mo alloys
  207. Altmetric Badge
    Chapter 342 Phase-Field Simulation of Solidification Microstructure Evolution in the Presence of Lateral Constraints
  208. Altmetric Badge
    Chapter 344 Strain-Induced Phase Transition in Martensitic Alloys: Phase-Field Simulation
  209. Altmetric Badge
    Chapter 351 Size Effect on Curie and Ordering Temperatures of Magnetic Nanoalloys
  210. Altmetric Badge
    Chapter 352 Two-dimensional Numerical Study on the Growth of Sea Ice Crystals with Flotation of Crystal Nuclei and Its C-axes Distribution
  211. Altmetric Badge
    Chapter 353 An Overall Simulation of Austenite Grain Evolution for Heavy Forgings During Heating and Hot Deformation
  212. Altmetric Badge
    Chapter 354 Computational Fluid Dynamics and Experimental Results for the Horizontal Single Belt Casting (HSBC) of Aluminum Alloy Strips
  213. Altmetric Badge
    Chapter 355 Development of a Full PLIC-VOF Method for Mold Filling Simulation of High Pressure Die Casting Process
  214. Altmetric Badge
    Chapter 359 Prediction of Casting Defects and Optimization of Casting Process during Gravity Casting of Al Turbo Charger Valve Housing
  215. Altmetric Badge
    Chapter 360 Prediction of the Shape of Molten Flux Film in Continous Casting Process
  216. Altmetric Badge
    Chapter 361 Study on Prevention of Wide-Thick Slab Transverse Cracks by Optimizing the Secondary Cooling Nozzles
  217. Altmetric Badge
    Chapter 363 Large-Scale Simulation of Dendritic Solidification
  218. Altmetric Badge
    Chapter 365 Mathematical Modeling of Electromagnetic Stirring of Molten Steel in DC Arc Furnaces
  219. Altmetric Badge
    Chapter 368 Multiphase Modeling of Macrosegregation Formation in Steel Ingot
  220. Altmetric Badge
    Chapter 370 Fuzzy Controlling Withdrawal Technology by Numerical Simulation to Optimize Directional Solidification Process of Superalloy Casting
  221. Altmetric Badge
    Chapter 371 Modeling of Thin Strip Profile during Cold Rolling on Roll Crossing and Shifting Mill
  222. Altmetric Badge
    Chapter 373 Front Tracking Model of Simultaneous Melting and Solidification During Multiple Layer Deposition in GMA Welding
  223. Altmetric Badge
    Chapter 377 The Numerical Simulation of Flow-Field Inside the Raceway in Blast Furnace Based on CFD
  224. Altmetric Badge
    Chapter 378 Thermo-mechanical Behavior and Cracking Susceptibility of Solidifying Shell in Continuous Casting Mold
  225. Altmetric Badge
    Chapter 379 A Parametric Study of Resistance Spot Welding of a Dual-Phase Steel Using Finite Element Analysis
  226. Altmetric Badge
    Chapter 380 An Approach for Modelling Carbon Homogenization Processes of Steel in Micro-Scale
  227. Altmetric Badge
    Chapter 382 Fuzzy Control Expert System of Hot Blast Stove Based on Simulation and Thermal Balance
  228. Altmetric Badge
    Chapter 384 Molecular Dynamics Study of Zirconium and Zirconium Hydride
  229. Altmetric Badge
    Chapter 387 Numerical Simulation of the Erosion in the Hearth of Corex Melter Gasifier under the Condition of Different Drainage Type
  230. Altmetric Badge
    Chapter 388 Numerical Simulations of Non-Metallic Inclusions Behavior in Gas-Stirred Ladle
  231. Altmetric Badge
    Chapter 389 Optimization of Hot-Zone Design through CFD Analysis for Kyropoulos Sapphire Single Crystal Grower
  232. Altmetric Badge
    Chapter 390 Physical Modeling on the Mold Flow Field Influenced by Nozzle Clogging
  233. Altmetric Badge
    Chapter 391 Simulation on the Melting Process of Iron Oxide Pellet in Slags
  234. Altmetric Badge
    Chapter 392 The Bustling Nature of Vacancies in Al Alloys
  235. Altmetric Badge
    Chapter 393 Three-Dimensional Numerical Simulation of the Thermal Damaged Mechanism of Baosteel Blast-Furnace Tuyere
  236. Altmetric Badge
    Chapter 394 Correlation Between Internal States and Strength in Bulk Metallic Glass
  237. Altmetric Badge
    Chapter 395 Fabrication and Mechanical Properties of Cu-Based Bulk Metallic Glass and Composites
  238. Altmetric Badge
    Chapter 398 Electrical Resistivities of La 55 Al 25 Ni 10 Cu 10 Bulk Metallic Glasses in Isochronal and Isothermal Heating Processes
  239. Altmetric Badge
    Chapter 399 Synthesis and Characterization of Bulk Nano Crystalline Pb Free Solders
  240. Altmetric Badge
    Chapter 400 Martensitic Transformation Behaviors of Fe-Ni Nanoparticles under External Field
  241. Altmetric Badge
    Chapter 401 Microstructure and Mechanical Properties of Harmonic Structure Designed Pure Aluminum
  242. Altmetric Badge
    Chapter 403 Microstructure and Mechanical Properties of Coarse and Ultrafine Grain Titanium with Different Iron Contents
  243. Altmetric Badge
    Chapter 404 Combination of ECAP Process and Heat Treatment to Achieve Refining Structure of Selected Magnesium Alloys
  244. Altmetric Badge
    Chapter 405 Influence of Low Temperature Annealing on Mechanical Behavior of Cu and Cu-Ge Alloy Processed by Cold Rolling
  245. Altmetric Badge
    Chapter 406 Fabrication of bulk nanocrystalline Ni-W with plastic deformability electrodeposited from a sulfamate bath
  246. Altmetric Badge
    Chapter 408 Improved Mechanical Properties of V-Added Medium Mn Trip Steel
  247. Altmetric Badge
    Chapter 411 Maximizing Performance of Al-Fe Alloys Processed by High-Pressure Torsion with Optimized Initial Microstructure and Processing Route
  248. Altmetric Badge
    Chapter 412 Microstructure Quantification and Mechanical Properties of Ultrafine Grained Fe-Cr Alloys and Pure Copper by Equal Channel Angular Pressing
  249. Altmetric Badge
    Chapter 413 Physical and Chemical Heterogeneity of Carbon Fibre
  250. Altmetric Badge
    Chapter 414 TEM Studies on RMnO 3 Multiferroic Materials
  251. Altmetric Badge
    Chapter 415 A Novel Oxide Characterization Method of Nickel Base Alloy 600 Used in Nuclear Plant Reactors
  252. Altmetric Badge
    Chapter 416 Conventional and Analytical Electron Microscopy Study of Phase Transformation in Implanted Diamond Layers
  253. Altmetric Badge
    Chapter 419 Multi-Functional K Ic -Test Specimen for Assessment of Different Tool and High-Speed Steel Properties
  254. Altmetric Badge
    Chapter 423 Fabrication of Uranium Dispersion Targets for Mo-99 Production
  255. Altmetric Badge
    Chapter 425 Influence of Trace Sb Addition in Ductile Cast Iron
  256. Altmetric Badge
    Chapter 428 Tem Observation of Spheroidal Graphite in Ductile Cast Iron
  257. Altmetric Badge
    Chapter 429 Measurement of Distributions of Local Internal Stress Near Grain Boundary in SUS316 by EXDM Using White X-ray Micro Beam
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

news
1 news outlet

Citations

dimensions_citation
11 Dimensions

Readers on

mendeley
18 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Proceedings of the 8 th Pacific Rim International Congress on Advanced Materials and Processing
Published by
Springer International Publishing, March 2017
DOI 10.1007/978-3-319-48764-9
ISBNs
978-3-31-948586-7, 978-3-31-948764-9
Editors

Marquis, Fernand

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 18 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 18 100%

Demographic breakdown

Readers by professional status Count As %
Student > Master 5 28%
Student > Doctoral Student 2 11%
Student > Ph. D. Student 2 11%
Unspecified 1 6%
Researcher 1 6%
Other 1 6%
Unknown 6 33%
Readers by discipline Count As %
Engineering 2 11%
Chemical Engineering 1 6%
Unspecified 1 6%
Immunology and Microbiology 1 6%
Nursing and Health Professions 1 6%
Other 2 11%
Unknown 10 56%