↓ Skip to main content

TMS 2017 146th Annual Meeting

Overview of attention for book
Cover of 'TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 High-Performance Supercapacitors Based on Hierarchical VOx Microspheres Forming from Hyperbranched Nanoribbons
  3. Altmetric Badge
    Chapter 2 Potential of Magnetotactic Bacteria for the Fabrication of Iron Nanoparticles
  4. Altmetric Badge
    Chapter 3 Facile Green Synthesis and Characterization of Water Soluble Superparamagnetic Iron Oxide-Gold Porphyrin Conjugate for Improved Photodynamic Therapy
  5. Altmetric Badge
    Chapter 4 Synthesis of AgNP’s from Industrial Waste Using Electrochemical Techniques
  6. Altmetric Badge
    Chapter 5 Synthesis of Mn 2 O 3 Nanopowders with Urea and Citric Acid by Solution Combustion Route
  7. Altmetric Badge
    Chapter 6 Evolution of Aluminum Alloys Structure at Production Phases of 3D Products by Methods of Additive Technologies
  8. Altmetric Badge
    Chapter 7 Characterization of Multiperforated Plates Manufactured by SLM and EBM for Aeroengine Applications
  9. Altmetric Badge
    Chapter 8 Direct Laser Metal Deposition of Eutectic Al-Si Alloy for Automotive Applications
  10. Altmetric Badge
    Chapter 9 Additive Manufacturing to Produce Standard and Custom Alloy Titanium
  11. Altmetric Badge
    Chapter 10 Aiming for Modeling-Assisted Tailored Designs for Additive Manufacturing
  12. Altmetric Badge
    Chapter 11 The Use of Laser Ultrasound to Detect Defects in Laser Melted Parts
  13. Altmetric Badge
    Chapter 12 SLM (Near)-Net-Shape Part Design Optimization Based on Numerical Prediction of Process Induced Distortions
  14. Altmetric Badge
    Chapter 13 Optimizing, Fabricating and Characterizing Additively Manufactured Heat Exchanger Tubing
  15. Altmetric Badge
    Chapter 14 Scaling Relationships for Direct Ink Writing with Acoustic Focusing
  16. Altmetric Badge
    Chapter 15 The Influence of Gas Cooling in Context of Wire Arc Additive Manufacturing—A Novel Strategy of Affecting Grain Structure and Size
  17. Altmetric Badge
    Chapter 16 Microstructure and Mechanical Properties of Laser Deposited Ni/WC Metal Matrix Composite Coatings
  18. Altmetric Badge
    Chapter 17 Composite Powder Consolidation Using Selective Laser Melting: Input Energy/Porosity Morphology/Balling Effect Relation
  19. Altmetric Badge
    Chapter 18 Strain Localization Structures in Textured Magnesium AZ31 Under Reversed Loading via Microscopic Digital Image Correlation
  20. Altmetric Badge
    Chapter 19 Deformation and Strengthening Mechanisms in AISI 321 Austenitic Stainless Steel Under Both Dynamic and Quasi-Static Loading Conditions
  21. Altmetric Badge
    Chapter 20 Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths
  22. Altmetric Badge
    Chapter 21 Microstructural Characterization of Inconel 600 Tubes After Tensile Tests at Various Temperatures and Strain Rates
  23. Altmetric Badge
    Chapter 22 Influences of Thermomechanical Treatments on the Microcstructure Evolution and Mechanical Properties of Nano-precipitates Strengthened Steels
  24. Altmetric Badge
    Chapter 23 Effects of Solid Solution Treatment on the Microstructure and Mechanical Properties in the Ultra-High Strength Steel Strengthened by Nanoscale Particles
  25. Altmetric Badge
    Chapter 24 Effects of Microstructure on the Strain Rate Sensitivity of Advanced Steels
  26. Altmetric Badge
    Chapter 25 Characterization of Chitin Synthesized from Snail Shell
  27. Altmetric Badge
    Chapter 26 Titanium-Magnesium Composite for Dental Implants (BIACOM)
  28. Altmetric Badge
    Chapter 27 Thermoelectric Behaviour of Polyvinyl Acetate/CNT Composites
  29. Altmetric Badge
    Chapter 28 Microstructure Characteristics of A356 Nanocomposites Manufactured via Ultrasonic Cavitation Processing Under Controlled Solidification Conditions
  30. Altmetric Badge
    Chapter 29 Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants
  31. Altmetric Badge
    Chapter 30 Osteoporosis and Fatigue Fracture Prevention by Analysis of Bone Microdamage
  32. Altmetric Badge
    Chapter 31 Bone Remodeling Under Tooth Loading
  33. Altmetric Badge
    Chapter 32 Investigating Biochemical Constituents of Cymbopogon citratus Leaf: Prospects on Total Corrosion of Concrete Steel-Reinforcement in Acidic-Sulphate Medium
  34. Altmetric Badge
    Chapter 33 Two-Step Sintering Effects on the Microstructure and Mechanical Properties of Forsterite Scaffolds
  35. Altmetric Badge
    Chapter 34 Material Behavior in Micro Milling of Zirconium Based Bulk Metallic Glass
  36. Altmetric Badge
    Chapter 35 Comparison of the Phase-Field Models to Predict the Recrystallization Kinetics
  37. Altmetric Badge
    Chapter 36 Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments
  38. Altmetric Badge
    Chapter 37 Atomic-Scale Modeling of Fe-Al-Mn-C Alloy Using Pair Models and Monte-Carlo Calculations
  39. Altmetric Badge
    Chapter 38 Control Technique Study of Non-metallic Inclusions in Low Carbon Steel by Rare Earth Final Deoxidization
  40. Altmetric Badge
    Chapter 39 Effect of Cooling Rate on Phase Transformation and Microstructure Evolution in a Large Size Forged Ingot of Medium Carbon Low Alloy Steel
  41. Altmetric Badge
    Chapter 40 Formation and Control of CaS Inclusion in Gear Steel 20MnCr5
  42. Altmetric Badge
    Chapter 41 Investigations on the Mechanical Deformation of Amorphous Alloy Nanowires Using Phase-Field Modeling and Thermodynamics Avalanche Models
  43. Altmetric Badge
    Chapter 42 Thermodynamic Modeling of Al-Fe-Cr Ternary System
  44. Altmetric Badge
    Chapter 43 A Modeling and Experimental Investigation on the Formation of Acicular Silicon and Sludge in High Pressure Die Casting of a Modified A383 Alloy
  45. Altmetric Badge
    Chapter 44 Hot-Tearing of Multicomponent Al-Cu Alloys Based on Casting Load Measurements in a Constrained Permanent Mold
  46. Altmetric Badge
    Chapter 45 Effect of Molybdenum Content, Pouring Temperature and Cooling Rate on the Casting Defects of High Chromium White Cast Iron
  47. Altmetric Badge
    Chapter 46 Effect of Various Aluminum Content on the Formation of Inclusion
  48. Altmetric Badge
    Chapter 47 Effect of Segregated Alloying Elements on the High Strength Steel Properties: Application to the Large Size Ingot Casting Simulation
  49. Altmetric Badge
    Chapter 48 Thermal-Mechanical Model of Depression Formation in Steel Continuous Casting
  50. Altmetric Badge
    Chapter 49 Study for the Initiation Locations of Longitudinal Surface Cracks on Beam Blank in the Mould of Continuous Casting
  51. Altmetric Badge
    Chapter 50 The Influence of SEN and Upper Nozzle Design on the Flow Character for the Slab Quality
  52. Altmetric Badge
    Chapter 51 Effect of the Addition of Ce and Si on Hot Cracking Behavior of SiMn Alloy During the Solidification Process
  53. Altmetric Badge
    Chapter 52 Modeling and Predication of Shrinkage Porosity Formation in Steel Ingot
  54. Altmetric Badge
    Chapter 53 Numerical Analysis of Coupled Turbulent Flow and Macroscopic Solidification in a Billet Continuous Casting Mould with Electromagnetic Stirring
  55. Altmetric Badge
    Chapter 54 Hydrogen Embrittlement and Hydrogen-Enhanced Strain-Induced Vacancies in α-Iron
  56. Altmetric Badge
    Chapter 55 Factors Causing Hydrogen Embrittlement of Cold-Drawn Pearlitic Steel Fractured Under Elastic/Plastic Region
  57. Altmetric Badge
    Chapter 56 Corrosion of Nickel-Titanium, C110, and Al6061 in Gallium-Based Liquid Metal Alloys
  58. Altmetric Badge
    Chapter 57 Synthesis and Characterization of Al–B 4 C Powders by Mechanical Alloying
  59. Altmetric Badge
    Chapter 58 Direct Conversion of Celestite to SrCO 3 by Wet Milling
  60. Altmetric Badge
    Chapter 59 Electrochemistry in Molten LiF-BeF 2 Salt for Fluoride Salt-Cooled High Temperature Reactor Applications
  61. Altmetric Badge
    Chapter 60 Impurity Removal from Titanium Oxycarbide
  62. Altmetric Badge
    Chapter 61 New Generation Molten Oxide Energy Materials R&D
  63. Altmetric Badge
    Chapter 62 Effects of Oxide Precursor Preparation Parameters on the Electrochemical Reduction of Tantalum Pentoxide in Calcium Chloride Melt
  64. Altmetric Badge
    Chapter 63 The Effect of Temperature on Electrochemical Codeposition of Mg–Ni Hydrogen Storage Alloys from Molten Salt System
  65. Altmetric Badge
    Chapter 64 Diffusion Studies in the Development of an FCCI Barrier for High-Burnup Metallic Nuclear Fuel
  66. Altmetric Badge
    Chapter 65 Development of Mold Inductor for Power Conversion System
  67. Altmetric Badge
    Chapter 66 Effect of Annealing Time on the Texture of a 2.8% Si Non-Oriented Electrical Steel After Inclined and Skew Rolling
  68. Altmetric Badge
    Chapter 67 Multi-Parameter Magnetic Material Characterization for High Power Medium Frequency Converters
  69. Altmetric Badge
    Chapter 68 An Experimental Assessment of the α + α’ Miscibility Gap in Fe-Cr
  70. Altmetric Badge
    Chapter 69 Phase Transformation, Microstructural Evolution and Property Modification in Rapidly Solidified Grey Cast Iron
  71. Altmetric Badge
    Chapter 70 Morphology of Order-Disorder Structures in Rapidly Solidified L12 Intermetallics
  72. Altmetric Badge
    Chapter 71 Development of Enamel Coatings in Accordance with Recent Regulations of Food Contact Materials
  73. Altmetric Badge
    Chapter 72 Transmission Probability of Diffusing Particles—A Case Study
  74. Altmetric Badge
    Chapter 73 Preparation of Porous Titanium Oxide Film by Sol-Gel Method
  75. Altmetric Badge
    Chapter 74 Hydride Precipitates in Zirconium Alloys: Evolution of Dissolution and Precipitation Temperatures During Thermal Cycling Correlated to Microstructure Features
  76. Altmetric Badge
    Chapter 75 Analysis of β´ Cu 4 Ti Precipitation in Cu-Ti Alloys by Conventional and Diffusion-Couple Methods
  77. Altmetric Badge
    Chapter 76 Carbide Precipitation in a Low Alloy Ferritic Steel
  78. Altmetric Badge
    Chapter 77 Fundamental Principles for a Successful Collaboration Between University and Metalworking Industries
  79. Altmetric Badge
    Chapter 78 Retraction Note to: Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

patent
1 patent

Citations

dimensions_citation
19 Dimensions

Readers on

mendeley
58 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings
Published by
Springer International Publishing, February 2017
DOI 10.1007/978-3-319-51493-2
ISBNs
978-3-31-951492-5, 978-3-31-951493-2
Editors

TMS, The Minerals, Metals & Materials Society

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 58 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 58 100%

Demographic breakdown

Readers by professional status Count As %
Student > Bachelor 1 2%
Unknown 57 98%
Readers by discipline Count As %
Engineering 1 2%
Unknown 57 98%