Surface Engineering

Table of Contents

1. Altmetric Badge
   Book Overview
2. Altmetric Badge
   Chapter 1 Characterisation and Quality Control of Surface Treatments and Coatings
3. Altmetric Badge
   Chapter 2 Microstructural Preparation and the Achievement of a Representative Surface
4. Altmetric Badge
   Chapter 3 Photothermal Reflectance Investigation of Implanted Silicon
5. Altmetric Badge
   Chapter 4 The Erosion-Corrosion of a Nitrocarburized Low Alloy Steel in a Simulated FBC Environment
6. Altmetric Badge
   Chapter 5 Comparison of Fractal and Conventional Topographic Analysis of Electric Discharge Machined Ceramic Surfaces
7. Altmetric Badge
   Chapter 6 Corrosion Protection through Salt Bath Nitriding
8. Altmetric Badge
   Chapter 7 Protection of Surfaces of Natural Stone and Concrete through Polymers
9. Altmetric Badge
   Chapter 8 The Influence of Directivity of Machining Marks on Grindability and Wear of Honed Surfaces
10. Altmetric Badge
    Chapter 9 Wear Resistant Surfaces with a Hardphase Gradient
11. Altmetric Badge
    Chapter 10 Surface Characterization and High-Temperature Adhesive Bonding of Carbon Fiber-Polyimide Matrix Composites
12. Altmetric Badge
    Chapter 11 Contact Angles on Imperfect Solid Surfaces
13. Altmetric Badge
    Chapter 12 Engineering the Interphase in Reinforced Plastics
14. Altmetric Badge
    Chapter 13 Ferroelectric Thin Films from Metallo-organics: The Influence of Different Atmospheres during RTA Processing
15. Altmetric Badge
    Chapter 14 Ultrasonic Verification of Surface Treatment Adequacy in Metal-to-Metal Adhesive Joints
16. Altmetric Badge
    Chapter 15 The Unidirectional Tensile Characteristics of Ion-Nitrided and Ion-Carbonitrided Surface Layer of 40CrNiMo
17. Altmetric Badge
    Chapter 16 Friction and Metal Transfer in Sliding Aluminum against Ion-Implanted Steel
18. Altmetric Badge
    Chapter 17 The Effect of Ion Implantation on the Fretting Fatigue Properties of Titanium Alloy Fan and Compressor Blades
19. Altmetric Badge
    Chapter 18 Martensitic Transformation in 304 Stainless Steel after Implantation with Neon
20. Altmetric Badge
    Chapter 19 Elevated Temperature Ion Implantation: A New Direction for Surface Engineering
21. Altmetric Badge
    Chapter 20 Surface Modification Experiment by Intense Pulsed Ion Beam
22. Altmetric Badge
    Chapter 21 PSII Nitrogen Implanted M2 Tool Steel for Wear Resistance in Wood Machining Tools
23. Altmetric Badge
    Chapter 22 Plasma Nitriding and Nitrocarburizing of Austempered S.G. Cast Iron
24. Altmetric Badge
    Chapter 23 Techniques for Improved Surface Integrity of Aerospace Aluminum Alloys
25. Altmetric Badge
    Chapter 24 Duplex Hardening: An Advanced Surface Engineering Technique for Helicopter Transmissions
26. Altmetric Badge
    Chapter 25 Low Cycle Fatigue Fracture Behaviour of Conventional and Damage Tolerant Microstructures of Inconel 718 at 650°C
27. Altmetric Badge
    Chapter 26 Corrosion and Wear Protection of Compressor Blades by Aluminum Coatings and a New Method for Testing their Erosion Resistance
28. Altmetric Badge
    Chapter 27 Effects of Surface Finish on the Solid State Welding of High Strength Aircraft and Aerospace Aluminium Alloys
29. Altmetric Badge
    Chapter 28 Surface Modifications of Zirconium Alloys by Laser Glazing
30. Altmetric Badge
    Chapter 29 Laser Shock Hardening of Welded Maraging Steel
31. Altmetric Badge
    Chapter 30 Laser Surface Heat Treatment Used for Induction of Residual Stresses into Circular Saw Blades for Better Working Behaviour
32. Altmetric Badge
    Chapter 31 Residual Stress Evaluation of Materials Manufactured by High-Energy Process
33. Altmetric Badge
    Chapter 32 Finite Element Analysis of Main Crack-Microcrack Interaction under Mode-I Loading
34. Altmetric Badge
    Chapter 33 The Effect of Surface Treatments on the Fretting Wear of an Aluminium Alloy (RR58)/Steel (BS 970 080 M40) Couple
35. Altmetric Badge
    Chapter 34 Degradation of a Biomedical Polyurethane: Surface Integrity and Fatigue Effects
36. Altmetric Badge
    Chapter 35 Microstructural and Surface Effects on Fatigue of Ti-6Al-4V Alloy
37. Altmetric Badge
    Chapter 36 Corrosion and Wear Characteristics of Nickel Aluminide, NiAl, in NaCl Medium
38. Altmetric Badge
    Chapter 37 The Study of Anticorrosion Technique for Natural Gas Processing Plants
39. Altmetric Badge
    Chapter 38 Shot Peening—Current Trends, Future Prospects
40. Altmetric Badge
    Chapter 39 Shot Peen Controls and Aircraft Engine Requirements
41. Altmetric Badge
    Chapter 40 Fatigue Fracture and Residual Stress Relaxation in Shot-Peened Components
42. Altmetric Badge
    Chapter 41 Some Theoretical Problems of Shot Peening
43. Altmetric Badge
    Chapter 42 Fatigue Damage Evaluation of Shot Peened High Strength Aluminum Alloy
44. Altmetric Badge
    Chapter 43 Effect of Shot Peening Process Controls on Consistent Treatment
45. Altmetric Badge
    Chapter 44 Effect of Pre- and Post-Processing upon Shot-Peening Residual Stresses
46. Altmetric Badge
    Chapter 45 Surface Kinetics of Hydrogen Entry into Zirconium Films
47. Altmetric Badge
    Chapter 46 Abrasive Flow Machining for Automatic Surface Finishing and Capacitance Technology for In-Process Surface and Dimensional Metrology
48. Altmetric Badge
    Chapter 47 Evolution du Dommage Surfacique au Cours d’un Essai de Fatigue Oligocyclique: Comparaison avec des Mesures de Dommage Volumique
49. Altmetric Badge
    Chapter 48 The Influence of Fine Structure, Morphology and Composition of Alloy and Oxide on the Growth of Cr 2 O 3 Scales
50. Altmetric Badge
    Chapter 49 Effect of Surface Texture Geometry on the Dynamic Performance of Hydrostatic Bearings
51. Altmetric Badge
    Chapter 50 Study of Tools for Hot Rolling of Steel Alloy Tubes
52. Altmetric Badge
    Chapter 51 Quality of Surface Coating by Submerged Arc Welding
53. Altmetric Badge
    Chapter 52 Surface Degradation and Stress Corrosion Cracking of Bronze in Moist Oil
54. Altmetric Badge
    Chapter 53 On Magnetron Sputtered Gradient and Multilayer Coatings
55. Altmetric Badge
    Chapter 54 Hydrophobic Reorientation of Glow-Discharge Treated Polyethylene as Measured by Contact Angles
56. Altmetric Badge
    Chapter 55 Hall Effect and Resistance Measurements on Implanted and Annealed Silicon Layers
57. Altmetric Badge
    Chapter 56 Diffusion of Carbon in Carbon Steels and Graphitic Cast Irons Heat Treated by Concentrated Energy Sources
58. Altmetric Badge
    Chapter 57 Influence of Electrochemical Honing Methods on Load Capacity of Surfaces
59. Altmetric Badge
    Chapter 58 Evaluation of Acid Rain Resistant Clear Coatings for Stone Structures
60. Altmetric Badge
    Chapter 59 Computer Modelling of the Abrasive Flow Machining Process
61. Altmetric Badge
    Chapter 60 Theoretical and Practical Study of On-Line Identification for the Grinding Burn
62. Altmetric Badge
    Chapter 61 Sand Erosion and Cavitation Behaviour of Hydraulic Turbine Runner Materials
63. Altmetric Badge
    Chapter 62 Improvement of Fatigue Resistance of Steel Parts after Various Surface Treatments
64. Altmetric Badge
    Chapter 63 Relationship between Ductility and Wear Resistance of High Mn-Steels
65. Altmetric Badge
    Chapter 64 The Use of Shot Peening as a Surface Preparation Treatment for the Electrodeposited Chromium Plating
66. Altmetric Badge
    Chapter 65 Analytical Solutions of Crack Developing at Rail Joint Due to Impacting
67. Altmetric Badge
    Chapter 66 An Investigation into Surface Generation during Machining High Strength Low Alloy Steel
68. Altmetric Badge
    Chapter 67 Development of Finish Turning Inserts: Present Trends and Future Prospects
69. Altmetric Badge
    Chapter 68 Machining Residual Stresses
70. Altmetric Badge
    Chapter 69 Effect of Cold Deformation on Boronizing Processes and Wear Behavior of Low Carbon Steel 1020