↓ Skip to main content

International Congress on Polymers in Concrete (ICPIC 2018)

Overview of attention for book
Cover of 'International Congress on Polymers in Concrete (ICPIC 2018)'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Concrete-Polymer Materials: How Far Have We Come, and Where Do We Need to Go?
  3. Altmetric Badge
    Chapter 2 Polymer Concrete for Bridge Preservation
  4. Altmetric Badge
    Chapter 3 Feasibility Study of the Use of Polymer-Modified Cement Composites as 3D Concrete Printing Material
  5. Altmetric Badge
    Chapter 4 Experimental Analysis and Micromechanics-Based Prediction of the Elastic and Creep Properties of Polymer-Modified Concrete at Early Ages
  6. Altmetric Badge
    Chapter 5 Durability and Long-Term Performance of Fiber-Reinforced Polymer as a New Civil Engineering Material
  7. Altmetric Badge
    Chapter 6 Nano-modified Polymer Concrete: A New Material for Smart and Resilient Structures
  8. Altmetric Badge
    Chapter 7 Bio-Based Superplasticizers for Cement-Based Materials
  9. Altmetric Badge
    Chapter 8 Screening Encapsulated Polymeric Healing Agents for Carbonation-Exposed Self-Healing Concrete, Service Life Extension, and Environmental Benefit
  10. Altmetric Badge
    Chapter 9 Synthesis and Characterization of Superabsorbent Polymer Hydrogels Used as Internal Curing Agents: Impact of Particle Shape on Mortar Compressive Strength
  11. Altmetric Badge
    Chapter 10 Evaluation of Microencapsulated Corrosion Inhibitors in Reinforced Concrete
  12. Altmetric Badge
    Chapter 11 The Use of Polymer Additions to Enhance the Performance of Industrial and Residential Decorative Concrete Flooring
  13. Altmetric Badge
    Chapter 12 The Effect of Glucose on the Properties of Cement Paste
  14. Altmetric Badge
    Chapter 13 Microstructured Polymers and Their Influences on the Mechanical Properties of PCC
  15. Altmetric Badge
    Chapter 14 Stability of Latex in Cement Paste: Experimental Study and Theoretical Analysis
  16. Altmetric Badge
    Chapter 15 Experimental Verification of Use of Secondary Raw Materials as Fillers in Epoxy Polymer Concrete
  17. Altmetric Badge
    Chapter 16 Effects of Anionic Asphalt Emulsion on Early-Age Cement Hydration
  18. Altmetric Badge
    Chapter 17 Polymer Solutions for Protection of Concrete Exposed to Strong Alkaline or Acid Effluent on Industrial Installations
  19. Altmetric Badge
    Chapter 18 Lightweight Filled Epoxy Resins for Timber Restoration
  20. Altmetric Badge
    Chapter 19 Effect of Methyl Methacrylate Monomer on Properties of Unsaturated Polyester Resin-Based Polymer Concrete
  21. Altmetric Badge
    Chapter 20 Analysis of Mechanical Behavior and Durability of Coatings for Use as Flooring in the Petroleum Industry
  22. Altmetric Badge
    Chapter 21 Evaluation of the Performance of Engineered Cementitious Composites (ECC) Produced from Local Materials
  23. Altmetric Badge
    Chapter 22 Application of Phase Change Material (PCM) in Concrete for Thermal Energy Storage
  24. Altmetric Badge
    Chapter 23 Mortars with Phase Change Materials (PCM) and Stone Waste to Improve Energy Efficiency in Buildings
  25. Altmetric Badge
    Chapter 24 Physical and Mechanical Properties of Cement Mortars with Direct Incorporation of Phase Change Material
  26. Altmetric Badge
    Chapter 25 Mechanical Performance of Fly Ash Geopolymeric Mortars Containing Phase Change Materials
  27. Altmetric Badge
    Chapter 26 Are Polymers Still Driving Forces in Concrete Technology?
  28. Altmetric Badge
    Chapter 27 Mechanical Properties of Polymer Cement-Fiber-Reinforced Concrete (PC-FRC): Comparison Based on Experimental Studies
  29. Altmetric Badge
    Chapter 28 Environmental Temperature and Humidity Adaptability of Polymer-Modified Cement Mortar
  30. Altmetric Badge
    Chapter 29 Innovative Polymer-Modified Pervious Concrete
  31. Altmetric Badge
    Chapter 30 Combined Methods to Investigate the Crack-Bridging Ability of Waterproofing Membranes
  32. Altmetric Badge
    Chapter 31 Polymer Concrete for a Modular Construction System: Investigation of Mechanical Properties and Bond Behaviour by Means of X-Ray CT
  33. Altmetric Badge
    Chapter 32 Bending and Crack Characteristics of Polymer Lattice-Reinforced Mortar
  34. Altmetric Badge
    Chapter 33 The Influence of Specimen Shape and Size on the PCC Compressive Strength Values
  35. Altmetric Badge
    Chapter 34 Long-Term Investigation on the Compressive Strength of Polymer Concrete with Fly Ash
  36. Altmetric Badge
    Chapter 35 Overlays: A Great Use for Polymer Concrete
  37. Altmetric Badge
    Chapter 36 PC with Superior Ductility Using Mixture of Pristine and Functionalized Carbon Nanotubes
  38. Altmetric Badge
    Chapter 37 Contribution of Concrete-Polymer Composites and Ancient Mortar Technology to Sustainable Construction
  39. Altmetric Badge
    Chapter 38 Smart Monitoring of Movement and Internal Temperature Changes Within Polymer Modified Concrete Repair Patches
  40. Altmetric Badge
    Chapter 39 PIC: Does It Have Potential?
  41. Altmetric Badge
    Chapter 40 A Perspective on 40 Years of Polymers in Concrete History
  42. Altmetric Badge
    Chapter 41 Development Length of Steel Reinforcement in Polymer Concrete for Bridge Deck Closure
  43. Altmetric Badge
    Chapter 42 Development of Ultrarapid-Hardening Epoxy Mortar for Railway Sleepers
  44. Altmetric Badge
    Chapter 43 Contribution of C-PC to Resilience of Concrete Structures in Seismic Country Japan
  45. Altmetric Badge
    Chapter 44 Precast Polymer Concrete Panels for Use on Bridges and Tunnels
  46. Altmetric Badge
    Chapter 45 The Effect of Combinations of Treated Polypropylene Fibers on the Energy Absorption of Fiber-Reinforced Shotcrete
  47. Altmetric Badge
    Chapter 46 Bond Performance of Steel-Reinforced Polymer (SRP) Subjected to Environmental Conditioning and Sustained Stress
  48. Altmetric Badge
    Chapter 47 High-Strength, Strain-Hardening Cement-Based Composites (HS-SHCC) Made with Different High-Performance Polymer Fibers
  49. Altmetric Badge
    Chapter 48 Uniaxial Tensile Creep Behavior of Two Types of Polypropylene Fiber Reinforced Concrete
  50. Altmetric Badge
    Chapter 49 Dynamic Behavior of Textile Reinforced Polymer Concrete Using Split Hopkinson Pressure Bar
  51. Altmetric Badge
    Chapter 50 Steel-Fiber Self-Consolidating Rubberized Concrete Subjected to Impact Loading
  52. Altmetric Badge
    Chapter 51 Effect of Fiber Combinations on the Engineering Properties of High-Performance Fiber-Reinforced Cementitious Composites
  53. Altmetric Badge
    Chapter 52 Application of Fibre-Reinforced Polymer-Reinforced Concrete for Low-Level Radioactive Waste Disposal
  54. Altmetric Badge
    Chapter 53 Efficiency of Polymer Fibers in Lightweight Plaster
  55. Altmetric Badge
    Chapter 54 Properties of Ceramic Waste Powder-Based Geopolymer Concrete
  56. Altmetric Badge
    Chapter 55 Use of Recycled Polymers in Asphalt Concrete for Infrastructural Applications
  57. Altmetric Badge
    Chapter 56 Influence of Method of Preparation of PC Mortar with Waste Perlite Powder on Its Rheological Properties
  58. Altmetric Badge
    Chapter 57 Design and Manufacture of a Sustainable Lightweight Prefabricated Material Based on Gypsum Mortar with Semirigid Polyurethane Foam Waste
  59. Altmetric Badge
    Chapter 58 Cement Mortars Lightened with Rigid Polyurethane Foam Waste Applied On-Site: Suitability and Durability
  60. Altmetric Badge
    Chapter 59 Latex-Modified Concrete Overlays Using Recycled Waste Paint
  61. Altmetric Badge
    Chapter 60 Effect of Using Kaolin and Ground-Granulated Blast-Furnace Slag on Green Concrete Properties
  62. Altmetric Badge
    Chapter 61 Lightweight Structural Recycled Mortars Fabricated with Polyurethane and Surfactants
  63. Altmetric Badge
    Chapter 62 Hydration in Mortars Manufactured with Ladle Furnace Slag (LFS) and the Latest Generation of Polymeric Emulsion Admixtures
  64. Altmetric Badge
    Chapter 63 Chemical Resistance of Vinyl-Ester Concrete with Waste Mineral Dust Remaining After Preparation of Aggregate for Asphalt Mixture
  65. Altmetric Badge
    Chapter 64 Performance Studies on Self-Compacting Geopolymer Concrete at Ambient Curing Condition
  66. Altmetric Badge
    Chapter 65 Effect of 3D Printing on Mechanical Properties of Fly Ash-Based Inorganic Geopolymer
  67. Altmetric Badge
    Chapter 66 Optimization of Fly Ash-Based Geopolymer Using a Dynamic Approach of the Taguchi Method
  68. Altmetric Badge
    Chapter 67 Microstructural and Strength Investigation of Geopolymer Concrete with Natural Pozzolan and Micro Silica
  69. Altmetric Badge
    Chapter 68 Performance of Steel Fiber-Reinforced High-Performance One-Part Geopolymer Concrete
  70. Altmetric Badge
    Chapter 69 Effect of Different Class C Fly Ash Compositions on the Properties of the Alkali-Activated Concrete
  71. Altmetric Badge
    Chapter 70 Effect of Curing Temperatures on Zero-Cement Alkali-Activated Mortars
  72. Altmetric Badge
    Chapter 71 Properties of PVA Fiber Reinforced Geopolymer Mortar
  73. Altmetric Badge
    Chapter 72 Thermal Performance of Fly Ash Geopolymeric Mortars Containing Phase Change Materials
  74. Altmetric Badge
    Chapter 73 Development of Fiber-Reinforced Slag-Based Geopolymer Concrete Containing Lightweight Aggregates Produced by Granulation of Petrit-T
  75. Altmetric Badge
    Chapter 74 Applications of Geopolymers in Concrete for Low-Level Radioactive Waste Containers
  76. Altmetric Badge
    Chapter 75 Microstructure and Mechanical Property Behavior of FRP Reinforcement Autopsied from Bridge Structures Subjected to In Situ Exposure
  77. Altmetric Badge
    Chapter 76 The Influences of Mechanical Load on Concrete-Filled FRP Tube Cylinders Subjected to Environmental Corrosion
  78. Altmetric Badge
    Chapter 77 Finite Element Analysis of RC Beams Strengthened in Shear with NSM FRP Rods
  79. Altmetric Badge
    Chapter 78 Effect of Sustained Load Level on Long-Term Deflections in GFRP and Steel-Reinforced Concrete Beams
  80. Altmetric Badge
    Chapter 79 Flexural Behavior and Cracks in Concrete Beams Reinforced with GFRP Bars
  81. Altmetric Badge
    Chapter 80 Flexural Rigidity Evaluation of Seismic Performance of Hollow-Core Composite Bridge Columns
  82. Altmetric Badge
    Chapter 81 Three-Dimensional Numerical Analysis of Hollow-Core Composite Building Columns
  83. Altmetric Badge
    Chapter 82 Pultruded GFRP Reinforcing Bars with Carbon Nanotubes
  84. Altmetric Badge
    Chapter 83 On Mechanical Characteristics of HFRP Bars with Various Types of Hybridization
  85. Altmetric Badge
    Chapter 84 Fatigue Behavior Characterization of Superelastic Shape Memory Alloy Fiber-Reinforced Polymer Composites
  86. Altmetric Badge
    Chapter 85 Strength Performance of Concrete Beams Reinforced with BFRP Bars
  87. Altmetric Badge
    Chapter 86 A Comparative Study on Colloidal Nanosilica Incorporation in Polymer-Modified Cement Mortars
  88. Altmetric Badge
    Chapter 87 Parametric Study on the Performance of UHPC and Nano-modified Polymer Concrete (NMPC) Composite Wall Panels for Protective Structures
  89. Altmetric Badge
    Chapter 88 Mechanical Characterization of Polymer Nanocomposites Reinforced with Graphene Nanoplatelets
  90. Altmetric Badge
    Chapter 89 Oil Well Cement Modified with Bacterial Nanocellulose
  91. Altmetric Badge
    Chapter 90 Effect of Incorporating Nano-silica on the Strength of Natural Pozzolan-Based Alkali-Activated Concrete
  92. Altmetric Badge
    Chapter 91 Review of Polymer Coatings Used for Blast Strengthening of Reinforced Concrete and Masonry Structures
  93. Altmetric Badge
    Chapter 92 Evaluation of Polymer-Modified Restoration Mortars for Maintenance of Deteriorated Sewage Treatment Structures
  94. Altmetric Badge
    Chapter 93 Finite Element Modeling of CFRP-Strengthened Low-Strength Concrete Short Columns
  95. Altmetric Badge
    Chapter 94 Improvement Works to Existing Column Stumps by Fiber-Reinforced Polymer Strengthening System
  96. Altmetric Badge
    Chapter 95 Silicone Resin Enclosing Method Applied for the Maintenance of Steel Bearings
  97. Altmetric Badge
    Chapter 96 Bio-Based Polyurethane Elastomer for Strengthening Application of Concrete Structures Under Dynamic Loadings
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
3 X users

Citations

dimensions_citation
26 Dimensions

Readers on

mendeley
95 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
International Congress on Polymers in Concrete (ICPIC 2018)
Published by
Springer International Publishing, June 2018
DOI 10.1007/978-3-319-78175-4
ISBNs
978-3-31-978174-7, 978-3-31-978175-4
Editors

Taha, Mahmoud M. Reda

X Demographics

X Demographics

The data shown below were collected from the profiles of 3 X users who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 95 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 95 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 20 21%
Student > Bachelor 18 19%
Student > Master 11 12%
Researcher 5 5%
Student > Doctoral Student 4 4%
Other 10 11%
Unknown 27 28%
Readers by discipline Count As %
Engineering 50 53%
Materials Science 10 11%
Chemistry 2 2%
Medicine and Dentistry 1 1%
Unspecified 1 1%
Other 2 2%
Unknown 29 31%