↓ Skip to main content

Review of Progress in Quantitative Nondestructive Evaluation

Overview of attention for book
Cover of 'Review of Progress in Quantitative Nondestructive Evaluation'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Chemical Non-Destructive Evaluation at the Center for Process Analytical Chemistry
  3. Altmetric Badge
    Chapter 2 Optical Sensors for Direct Measurements in Chemical Processes
  4. Altmetric Badge
    Chapter 4 The Use of Spectral Methods in Predicting the Reflection and Transmission of Ultrasonic Signals Through Flaws
  5. Altmetric Badge
    Chapter 5 Elastic Wave Diffraction at Cracks in Anisotropic Materials
  6. Altmetric Badge
    Chapter 6 Modeling of Ultrasonic Signals from Weak Inclusions
  7. Altmetric Badge
    Chapter 7 Ultrasonic Modeling of Real-Life NDT Situations: Applications and Further Developments
  8. Altmetric Badge
    Chapter 8 Mechanical Reciprocity Principles and Ultrasonic Measurement Models
  9. Altmetric Badge
    Chapter 9 Numerical Simulation of Pulsed Pressure Waves in Attenuative and Dispersive Media
  10. Altmetric Badge
    Chapter 10 Theoretical Predictions and Experimental Measurements of Echo Responses from Tilted Flat-Bottomed Holes
  11. Altmetric Badge
    Chapter 11 Distance Amplitude Correction Factors for Immersion Ultrasonic Measurements through Curved Surfaces
  12. Altmetric Badge
    Chapter 12 Defect Sizing Using Distance-Gain-Size Diagrams for Flat-Bottomed Holes in a Solid: Theoretical Analysis and Experimental Verification
  13. Altmetric Badge
    Chapter 13 Elastic Wave Scattering by an Interface Crack in Layered Materials
  14. Altmetric Badge
    Chapter 14 Numerical Model of Elastic Wave Interactions with a Diffusion Bond
  15. Altmetric Badge
    Chapter 15 Spring and Asymptotic Boundary Condition Models for Study of Scattering by Thin Cylindrical Interphases
  16. Altmetric Badge
    Chapter 16 Coherent and Incoherent Scattering Mechanisms in Air-Filled Permeable Materials
  17. Altmetric Badge
    Chapter 17 Modeling and Parameter Estimation of Ultrasonic Backscattered Echoes
  18. Altmetric Badge
    Chapter 18 A Computationally Efficient Modeling Code for Sh-Waves in Austenitic Welds Using an Explicit Space-Time Green-Function
  19. Altmetric Badge
    Chapter 19 Mathematical Modelling of the Rayleigh Wave Reception by the System Whith Elastic Waveguide
  20. Altmetric Badge
    Chapter 22 Geometry and Diffraction Effects in Acoustic Beam Reflection Studies from a Fluid-Loaded Plate
  21. Altmetric Badge
    Chapter 23 Lamb Wave Propagation Across a Lap Joint
  22. Altmetric Badge
    Chapter 24 The Existence of Low Loss Lamb Modes in Highly Attenuative Media
  23. Altmetric Badge
    Chapter 25 Scattering Analysis and Simulation for Lamb Wave Ultrasonic Testing
  24. Altmetric Badge
    Chapter 26 Lamb Wave Scattering from Rivets
  25. Altmetric Badge
    Chapter 27 Guided Wave Behavior Analysis in Multi-Layered Inhomogeneous Anisotropic Plates
  26. Altmetric Badge
    Chapter 29 Lamb Wave Mode Sensitivity to Detect Various Material Defects in Multilayered Composite Plates
  27. Altmetric Badge
    Chapter 32 Lamb Wave Modes Propagating Along Arbitrary Directions in an Orthotropic Plate
  28. Altmetric Badge
    Chapter 33 Lamb Wave Propagation in Thermally Damaged Composites
  29. Altmetric Badge
    Chapter 34 Perturbation and Finite Difference Solutions for Wave Propagation in Composites with Periodic Stiffness Variations
  30. Altmetric Badge
    Chapter 35 Axisymmetric Waves in Layered Anisotropic Fibers and Composites
  31. Altmetric Badge
    Chapter 36 Efficient Modeling of Finite Acoustic Beam Excitation and Detection of Interface and Bulk Waves on Planar and Cylindrical Fluid-Solid Structures
  32. Altmetric Badge
    Chapter 37 Aperture Integral Ultrasonic Pulse Transmission Model
  33. Altmetric Badge
    Chapter 38 Finite Element Modeling of Transient Wave Phenomena at Solid/Fluid Interfaces
  34. Altmetric Badge
    Chapter 39 Ultrasonic Wave Propagation through Nozzles and Pipes with Claddings around their Inner Walls
  35. Altmetric Badge
    Chapter 40 Absorbing Boundary Conditions with Zero Reflection Angles for Compressional and Shear Incident Waves
  36. Altmetric Badge
    Chapter 41 Lamb Waves Propagation in Aluminum Honeycomb Structures
  37. Altmetric Badge
    Chapter 42 Recent Developments in Modeling Eddy-Current Probe-Flaw Interactions
  38. Altmetric Badge
    Chapter 43 Extended Magnetic Potential Method for Quasi-Static Electromagnetism and Eddy Current Phenomena
  39. Altmetric Badge
    Chapter 44 Forward and Inverse Processing in Electromagnetic NDE Using Squids
  40. Altmetric Badge
    Chapter 45 Eddy Current Flow Near an Edge: A Comparison between Stratton-Chu and Magnetic Potential Formulations
  41. Altmetric Badge
    Chapter 46 Edge Crack Detection: A Theoretical and Experimental Study
  42. Altmetric Badge
    Chapter 47 Analytical Solutions to the Problem of Eddy Current Probes Consisting of Long Parallel Conductors
  43. Altmetric Badge
    Chapter 48 Wavelet Expansions in Volume Integral Method of Eddy-Current Modeling
  44. Altmetric Badge
    Chapter 49 Three Dimensional Simulation of Remote Field Eddy Current Nondestructive Testing Phenomena
  45. Altmetric Badge
    Chapter 51 Depth-Selective Squid Eddy Current Techniques for Second Layer Flaw Detection
  46. Altmetric Badge
    Chapter 52 Thickness and Conductivity of Metallic Layers from Pulsed Eddy Current Measurements
  47. Altmetric Badge
    Chapter 53 Effect of Phase Delay on Low Frequency Operation of Flux Focusing Eddy Current Probe
  48. Altmetric Badge
    Chapter 54 Optimization Tool for X-Ray Radiography NDE
  49. Altmetric Badge
    Chapter 55 Underwater X-Ray Tomography Using Compton Backscatter Imaging
  50. Altmetric Badge
    Chapter 56 Review of Progress in Quantitative Nondestructive Evaluation
  51. Altmetric Badge
    Chapter 58 Temporal Response of Terbium Glass Scintillator Used for X-Ray Tomography and Radiography
  52. Altmetric Badge
    Chapter 59 Heavy Metal Contamination Detection Using X-Rays
  53. Altmetric Badge
    Chapter 60 Segmentation and Density-Evaluation of Fiber-Reinforced Materials by Dual-Energy Computerized Tomography
  54. Altmetric Badge
    Chapter 62 Application of 3D X-Ray CT Data Sets to Finite Element Analysis
  55. Altmetric Badge
    Chapter 63 X-Ray Computed Tomography Application Research
  56. Altmetric Badge
    Chapter 64 Mathematical Modelling of Transient Thermography and Defect Sizing
  57. Altmetric Badge
    Chapter 65 Applications of Lockin-Thermography Methods
  58. Altmetric Badge
    Chapter 66 Early-Time Pulse-Echo Thermal Wave Imaging
  59. Altmetric Badge
    Chapter 67 Precise Thermal NDE for Quantifying Structural Damage
  60. Altmetric Badge
    Chapter 69 Time-Resolved Microwave Thermoreflectometry for Infrastructure Inspection
  61. Altmetric Badge
    Chapter 71 Linearized MFL Model for Embedded Flaw Detection in Rails
  62. Altmetric Badge
    Chapter 72 3D Finite Element Methods for Modeling MFL Inspection of Pipelines
  63. Altmetric Badge
    Chapter 73 Magnetic Particle Inspection Simulation Model
  64. Altmetric Badge
    Chapter 74 Laser Ultrasonic Thermoelastic/Ablation Generation with Laser Interferometric Detection in Graphite/Polymer Composites
  65. Altmetric Badge
    Chapter 75 Characterization of Surfaces and Coatings Using Laser-Generated Ultrasonic Surface Waves
  66. Altmetric Badge
    Chapter 77 Shear Wave Wedge for Laser Ultrasonics
  67. Altmetric Badge
    Chapter 78 Laser Ultrasonic Detection of the Solidification Front During Casting
  68. Altmetric Badge
    Chapter 79 Injection Locked Laser Sensor for Ultrasonic Sensing
  69. Altmetric Badge
    Chapter 80 A Laser Interferometric Method for Small- and Finite-Amplitude Ultrasonic Waves’ Detection in Transparent Media
  70. Altmetric Badge
    Chapter 82 Specifications of an Ultrasonic Receiver Based on Two-Wave Mixing in Photorefractive Gallium Arsenide Implemented in a Laser-Ultrasonic System
  71. Altmetric Badge
    Chapter 83 Fiberized Sagnac Interferometer for Ultrasound Measurement
  72. Altmetric Badge
    Chapter 85 A Fiber Optic Ultrasound Sensor for Monitoring the Cure of Epoxy
  73. Altmetric Badge
    Chapter 88 Detection/Location of Small Flaws in Composite Structures Using Microwaves
  74. Altmetric Badge
    Chapter 91 A Microwave Transducer for Detecting Conductive Surfaces Beneath Protective Coatings
  75. Altmetric Badge
    Chapter 92 Air-Gap Detection in Dielectric Materials by a Step-Frequency Microwave Technique
  76. Altmetric Badge
    Chapter 93 Effects of Lift-Off on Microwave NDE Using an Open-Ended Rectangular Waveguide
  77. Altmetric Badge
    Chapter 94 Electromagnetic Modeling of the Interaction of Cracks in Metallic Surfaces with Open-Ended Waveguides Using an Equivalent Magnetic Current
  78. Altmetric Badge
    Chapter 95 Near-Field Analysis of Rectangular Waveguide Probes Used for Imaging
  79. Altmetric Badge
    Chapter 96 An Application of Wavelet Signal Processing to Ultrasonic Nondestructive Evaluation
  80. Altmetric Badge
    Chapter 97 Wavelet Transform Signal Processing Applied to Ultrasonics
  81. Altmetric Badge
    Chapter 98 Echo Extraction from an Ultrasonic Signal Using Continuous Wavelet Transform
  82. Altmetric Badge
    Chapter 99 Improvement of Time Reversal Processing in Titanium Inspections
  83. Altmetric Badge
    Chapter 100 Singular Value Decomposition of Wigner Distribution for Time-Frequency Representation of Ultrasonic Echoes
  84. Altmetric Badge
    Chapter 101 Optimum Filter Based Techniques for Data Fusion
  85. Altmetric Badge
    Chapter 102 Quantitative Evaluation of Defects by Fuzzy Reasoning Based on Principal Component Analysis
  86. Altmetric Badge
    Chapter 104 Crack Parameter Characterization by a Neural Network
  87. Altmetric Badge
    Chapter 107 Introduction of the Signature Classification Development System
  88. Altmetric Badge
    Chapter 108 Edge Detection on Eddy Current Image to Increase Defect Characterization
  89. Altmetric Badge
    Chapter 109 Eddy Current Image Restoration Using the Groshong Parametric Model
  90. Altmetric Badge
    Chapter 110 Conductivity Imaging in Plates Using Current Injection Tomography
  91. Altmetric Badge
    Chapter 111 High Resolution Image Reconstruction of Polymer Composite Materials Using Neural Networks
  92. Altmetric Badge
    Chapter 112 Computed Tomography Using Laser-Based Ultrasonics
  93. Altmetric Badge
    Chapter 113 Ultrasonic Imaging of Anomalies in Truck Tires
  94. Altmetric Badge
    Chapter 115 A New Technique for Distinguishing Internal Voids from Solid Inclusions
  95. Altmetric Badge
    Chapter 118 A Novel Image Processing Algorithm for Enhancing the Probability of Detection of Flaws in X-Ray Images
  96. Altmetric Badge
    Chapter 119 Imaging Flaws under Insulation Using a Squid Magnetometer
  97. Altmetric Badge
    Chapter 120 Improvement to Defect Detection by Ultrasonic Data Processing: The DTVG Method
  98. Altmetric Badge
    Chapter 121 Imaging of Creep Damaged CrMo Steel Piping Using Magnetic Parameter Variations
  99. Altmetric Badge
    Chapter 122 Strategies for Characterizing Transducers and Measurement Systems
  100. Altmetric Badge
    Chapter 123 Determination of the Absolute Sensitivity Limit of a Piezoelectric Displacement Transducer
  101. Altmetric Badge
    Chapter 124 Metal Diffusion Bonded Transducers for Resonant Ultrasound Spectroscopy (RUS)
  102. Altmetric Badge
    Chapter 125 The Effect of Dust and Surface Roughness on the Efficiency of Solid Coupled Wheel Probes
  103. Altmetric Badge
    Chapter 126 Wideband Nonuniformly Excited Focused Transducers — Theory and Experiments
  104. Altmetric Badge
    Chapter 128 A New Ultrasonic Transducer Combining Three Modes: High Axial Resolution, High Transverse Resolution and Standard Modes
  105. Altmetric Badge
    Chapter 129 Observation of Shear Wave Modes in the Echoes of the Longitudinal Wave Transducer
  106. Altmetric Badge
    Chapter 130 Transient Analysis of a Line-Focus Transducer Probing a Liquid/Solid Interface
  107. Altmetric Badge
    Chapter 131 Acoustic Waves Generated by a Transient Point Source in an Anisotropic Medium: Comparison Between Theory and Experiment
  108. Altmetric Badge
    Chapter 132 Modeling the Ultrasonic Radiation of Shear Wave Angle Beam Transducers
  109. Altmetric Badge
    Chapter 133 Broadband Fields Radiated in a Solid by Water-Coupled Transducers: A Comparison of Approximate Models, Numerical Approaches and Experiments
  110. Altmetric Badge
    Chapter 134 Interrogating a Thin Layer of Heterogeneity with Confocal Transducers
  111. Altmetric Badge
    Chapter 135 Design and Optimization of a Multifunctional Phased Array Search Unit
  112. Altmetric Badge
    Chapter 136 The Response of an Air-Coupled Ultrasonic Transducer for Various Backplates and Apertures
  113. Altmetric Badge
    Chapter 138 Air-Coupled Ultrasound and Leaky Lamb Waves in Composites
  114. Altmetric Badge
    Chapter 140 Air-Coupled Ultrasonic Bulk Waves to Measure Elastic Constants in Composite Materials
  115. Altmetric Badge
    Chapter 141 Air-Coupled Ultrasonic Transducers for the Detection of Defects in Plates
  116. Altmetric Badge
    Chapter 142 A New ECT Probe with Rotating Direction Eddy Current
  117. Altmetric Badge
    Chapter 143 Passive Pulsed Eddy Current Inspecticn of Sheet Metal
  118. Altmetric Badge
    Chapter 144 Computer Assisted Eddy Current Probe Design
  119. Altmetric Badge
    Chapter 145 Application of Self-Nulling Eddy Current Probe and Spin-Off Sensor Technologies to Airline Industries and Beyond
  120. Altmetric Badge
    Chapter 146 High Sensitivity AC Field Measurement Using Rhombic Inducer
  121. Altmetric Badge
    Chapter 147 The Emergence of Extended Field Technology in the Air Force
  122. Altmetric Badge
    Chapter 149 Magnetoresistive Eddy-Current Sensor for Detecting Deeply Buried Flaws
  123. Altmetric Badge
    Chapter 150 Advances in the Theory and Practice of Squid NDE
  124. Altmetric Badge
    Chapter 151 Magneto-Optic/Eddy Current Imaging of Subsurface Corrosion and Fatigue Cracks in Aging Aircraft
  125. Altmetric Badge
    Chapter 152 Bulk Wave Characterization of Laminated Composites
  126. Altmetric Badge
    Chapter 154 Validity of the Elastic Constant Approximations for the Ultrasonic Evaluation of Multi-Layered Inhomogeneous Composites
  127. Altmetric Badge
    Chapter 155 Application of Shear Waves for Composite Laminate Characterization
  128. Altmetric Badge
    Chapter 157 Acoustic Emission Analysis of SCS-6 Fiber Fracture in Titanium Matrix Composites
  129. Altmetric Badge
    Chapter 158 Ultrasonic Velocities of C/AL Composites Determined by Laser Ultrasonic Method
  130. Altmetric Badge
    Chapter 159 Characterization of Static- and Fatigue-Loaded Carbon Composites by X-Ray CT
  131. Altmetric Badge
    Chapter 160 Use of Ultrasonic Lamb Waves for In-Process Porosity Inspection of the Pultrusion Process: Theoretical Velocity Calculations
  132. Altmetric Badge
    Chapter 161 The Effect of Porosity Density and Configuration in Composite Materials on the Ultrasonic Waveform
  133. Altmetric Badge
    Chapter 162 Ultrasonic NDE Techniques and the Effects of Flaws on Mechanical Performance in Multi-Directionally Reinforced Textile Composites
  134. Altmetric Badge
    Chapter 163 Eddy Current Detection of Fatigue Microcrack Distributions in Al-SiC Composites
  135. Altmetric Badge
    Chapter 164 Quantitative Ultrasonic Characterization of Metal Matrix Composite Fiber/Matrix Interfacial Failure
  136. Altmetric Badge
    Chapter 165 Thermography for Honeycomb Panel Inspection
  137. Altmetric Badge
    Chapter 166 Characterization of Composite Materials from Temporal Thermal Response
  138. Altmetric Badge
    Chapter 167 Influence of the Frequency Behavior of Arall and Glare on the Ultrasonic C-Scan Inspection
  139. Altmetric Badge
    Chapter 168 Guided Waves for Composite Patch Repair of Aging Aircraft
  140. Altmetric Badge
    Chapter 170 The Use of Temperature Pulses to Detect Debonding of Honeycomb Sandwich Panels
  141. Altmetric Badge
    Chapter 172 Measurement of Adhesion Strength of Bonds Using Nonlinear Acoustics
  142. Altmetric Badge
    Chapter 173 Ultrasonic Evaluation of Quality Attributes in Live Beef Animals Using Real-Time B-Mode Ultrasound Imaging
  143. Altmetric Badge
    Chapter 174 Backscatter from Specific Regions of Human Hearts Obtained from Standard Echocardiography Views
  144. Altmetric Badge
    Chapter 175 Determination of Elastic Parameters of Pharmaceutical Materials Using a Fiber Interferometer
  145. Altmetric Badge
    Chapter 176 Linear and Nonlinear Ultrasonic Properties of Fatigued 410Cb Stainless Steel
  146. Altmetric Badge
    Chapter 177 Plastic Strain Ratio and Texture Coefficients in Orthotropic Sheets of Cubic Metals
  147. Altmetric Badge
    Chapter 178 Nonlinear Acoustic Assessment of Precipitation-Induced Coherency Strains in Aluminum Alloy 2024
  148. Altmetric Badge
    Chapter 179 A Nondestructive Observation of the Mechanism of Plastic Deformation in Orthogonal Cutting
  149. Altmetric Badge
    Chapter 180 Applications of SH Mode for Measurement of Anisotropic Properties of Solids
  150. Altmetric Badge
    Chapter 181 Crack Size Detection Capability of Acoustic Emission
  151. Altmetric Badge
    Chapter 183 Material Properties of Aged and Unaged Inconel 718 as Determined from Nondestructive and Destructive Tests
  152. Altmetric Badge
    Chapter 184 Type discrimination of Various Welding Defects Created During Production and In-Service Use
  153. Altmetric Badge
    Chapter 185 Determination of Elastic Constants by Line-Focus V(Z) Measurements of Multiple Saw Modes
  154. Altmetric Badge
    Chapter 186 Elastic Constants Determination of the Thin Cold-Rolled Stainless Steel by Acoustic Resonance Method
  155. Altmetric Badge
    Chapter 187 Materials Characterization by a Time-Resolved and Polarization-Sensitive Ultrasonic Technique
  156. Altmetric Badge
    Chapter 188 Ultrasonic Attenuation Measurements at 300 MHz
  157. Altmetric Badge
    Chapter 189 Thermal Effects in the Fracture of Rubber-Modified Polystyrene
  158. Altmetric Badge
    Chapter 190 A Critical Analysis of the Theoretical Basis of Ultrasonic Scattering Measurements
  159. Altmetric Badge
    Chapter 191 Variance of the Ultrasonic Signal from a Defect Beneath a Rough Surface
  160. Altmetric Badge
    Chapter 192 A Generalized Model of the Effects of Microstructure on Ultrasonic Backscattering and Flaw Detection
  161. Altmetric Badge
    Chapter 193 An Experimental Investigation of Ultrasonic “Grain Noise” in Titanium -6AL-4V
  162. Altmetric Badge
    Chapter 195 Ultrasonic Noise and the Volume of the Ultrasonic Pulse
  163. Altmetric Badge
    Chapter 197 Predicting Gated-Peak Grain Noise Distributions for Ultrasonic Inspections of Metals
  164. Altmetric Badge
    Chapter 199 Ultrasonic Attenuation Measurements in Jet-Engine Titanium Alloys
  165. Altmetric Badge
    Chapter 200 Analysis of Mechanical Damage Detection in Gas Pipeline Inspection
  166. Altmetric Badge
    Chapter 201 Metal Loss Characterization in 55-Gallon Drum Steel by the Magnetic Flux Leakage Method
  167. Altmetric Badge
    Chapter 202 Estimation of Grinding Burn Damage Using Barkhausen Technique
  168. Altmetric Badge
    Chapter 203 Time Resolved Infrared Radiometry for Subsurface Interface Imaging
  169. Altmetric Badge
    Chapter 204 Photothermal and Photo Acoustic Investigation of Zirconia Coating Delaminations
  170. Altmetric Badge
    Chapter 205 Subsurface Defect Detection in Ceramic Materials Using Optical Gating Techniques
  171. Altmetric Badge
    Chapter 206 Eddy Current Characterization of Flaws in NiCoCrAlY-Coated Nickel-Base Superalloys
  172. Altmetric Badge
    Chapter 208 Ultrasonic Evaluation of Case Depth in Case-Carburized Steel Components
  173. Altmetric Badge
    Chapter 209 Surface Elastic Wave Measurements for Determination of Steel Hardness Gradients
  174. Altmetric Badge
    Chapter 210 Surface Characterization of Material Using Rayleigh Velocity Measurement in the Broad-Band Mode
  175. Altmetric Badge
    Chapter 211 Ultrasonic NDE of Sprayed Ceramic Coatings
  176. Altmetric Badge
    Chapter 212 Ultrasonic Predictions of Plastic Strain Ratios in Steel Sheet
  177. Altmetric Badge
    Chapter 213 Using Rayleigh Wave Dispersion to Characterize Residual Stresses
  178. Altmetric Badge
    Chapter 214 Acoustoelastic Measurement of Second- and Third-Order Elastic Constants in Silicon Carbide and Alumina Particulate-Reinforced Aluminum Metal Matrix Composites
  179. Altmetric Badge
    Chapter 215 Effect of Shear Modes Interference in Anisotropic Materials
  180. Altmetric Badge
    Chapter 216 Absolute Ultrasonic Measurements of Residual Stresses
  181. Altmetric Badge
    Chapter 217 Absolute Determination of Elastic Constants and Stresses from Ultrasonic Group Velocity Data
  182. Altmetric Badge
    Chapter 218 Wave Propagation in Stressed Composites
  183. Altmetric Badge
    Chapter 219 Determination of Angular Parallaxes between the Geometric Coordinate System and the Material Symmetry Coordinate System of Anisotropic Materials
  184. Altmetric Badge
    Chapter 220 Effect of Texture on Ultrasonic Backscattering Coefficient in Pure Titanium Plate
  185. Altmetric Badge
    Chapter 221 Effect of Wave Types on Ultrasonic Texture Identification
  186. Altmetric Badge
    Chapter 222 Texture Assessment in SCS-6 Fibers from Ultrasonic Dispersion Measurements
  187. Altmetric Badge
    Chapter 223 Nondestructive Ultrasonic Characterization of the Orientation Distribution of Short-Fiber Composites
  188. Altmetric Badge
    Chapter 224 Characterization of Corrosion in Aluminum Alloys Using Nuclear Magnetic Resonance
  189. Altmetric Badge
    Chapter 225 Quantitative Measurement of Metal Loss Due to Corrosion in Aluminum Aircraft Skin
  190. Altmetric Badge
    Chapter 226 Improved Measurements of Samples Simulating Corrosion in Lap-Seams of Aluminum Aircraft
  191. Altmetric Badge
    Chapter 227 Nondestructive Evaluation of Corrosion through Insulation
  192. Altmetric Badge
    Chapter 228 Thermal Wave Imaging of Disbonding and Corrosion on Aircraft
  193. Altmetric Badge
    Chapter 229 Eddy-Current Detection of Pitting Corrosion in Aircraft Lap-Splices
  194. Altmetric Badge
    Chapter 230 Depth Determination of Surface-Breaking Cracks in Concrete Slabs Using a Self-Compensating Ultrasonic Technique
  195. Altmetric Badge
    Chapter 231 Application of Spread-Spectrum Ultrasonic Evaluation to Concrete Structures
  196. Altmetric Badge
    Chapter 232 A Pulse Compression Ultrasonic Test Instrument and Its Applications
  197. Altmetric Badge
    Chapter 233 Defect Detection in Concrete Bridge Decks Using Radar
  198. Altmetric Badge
    Chapter 234 A Novel Inductive System for Two-Dimensional Imaging of Reinforcing Components in Concrete Structures: From Hardware to Image Enhancement
  199. Altmetric Badge
    Chapter 235 Ultrasonic NDT Prototype for the Inspection of Ducted Post Stressing Tendons in Concrete Beams
  200. Altmetric Badge
    Chapter 236 Improved Assessment of Concrete Dams Using Sonic Tomography
  201. Altmetric Badge
    Chapter 238 A Rolling Weight Deflectometer for Quantitative Pavement Measurements
  202. Altmetric Badge
    Chapter 239 A Coring Method for the Nondestructive Evaluation of Effective Prestress Force in Prestressed Concrete Structures
  203. Altmetric Badge
    Chapter 240 Ultrasonic and Electromagnetic Wave Propagation and Inverse Scattering Applied to Concrete
  204. Altmetric Badge
    Chapter 241 Long Range Bridge Girder Evaluation Using Lamb Waves
  205. Altmetric Badge
    Chapter 242 New Work in Acoustic Leak Location in Underground Pipelines
  206. Altmetric Badge
    Chapter 243 The Inspection of Chemical Plant Pipework Using Lamb Waves: Defect Sensitivity and Field Experience
  207. Altmetric Badge
    Chapter 245 On-Site Ultrasonic Inspection of Highway Culverts
  208. Altmetric Badge
    Chapter 246 A New Approach to Automated Labeling of Internal Features of Hardwood Logs Using CT Images
  209. Altmetric Badge
    Chapter 247 Nondestructive Evaluation of Green Dimension Lumber Using Stress Wave and Transverse Vibration Techniques
  210. Altmetric Badge
    Chapter 248 Non Destructive Evaluation of Cracks in Porous Building Materials by Use of Crawling Spot Thermal Technique
  211. Altmetric Badge
    Chapter 249 High Performance Ultrasonic Inspection of Tubes
  212. Altmetric Badge
    Chapter 250 Ultrasonic Scan Control and Analysis Using Catia Datasets
  213. Altmetric Badge
    Chapter 251 Adaptation of a Marine Echo-Sounder to Support UST Remediation Activities at Hanford Nuclear Reservation
  214. Altmetric Badge
    Chapter 252 Ultrasonic Width and Thickness Monitoring System in a Lamination Process
  215. Altmetric Badge
    Chapter 253 Application of Dynamic Adaptive Focusing System to Ultrasonic Non Destructive Testing
  216. Altmetric Badge
    Chapter 254 Generation of Axial Shear Acoustic Resonance by Magnetostrictively Coupled Emat
  217. Altmetric Badge
    Chapter 255 Nuclear Waste Drum Characterization with Mobile Tomographic Assay and NDE
  218. Altmetric Badge
    Chapter 257 A Thermal Imaging System for Crack Growth Quantification in Thermo-Mechanical Fatigue Specimens
  219. Altmetric Badge
    Chapter 258 Fatigue Monitoring System Progress
  220. Altmetric Badge
    Chapter 259 Raising the Reliability of NDE by Combination and Standardisation of NDT-Data Using the Trappist System
  221. Altmetric Badge
    Chapter 260 Methodology for Estimating Nondestructive Evaluation Capability
  222. Altmetric Badge
    Chapter 261 Probability of Detection for Applied Ultrasonic Inspection
  223. Altmetric Badge
    Chapter 262 Iowa Demonstration Laboratory for NDE Applications Project Review
  224. Altmetric Badge
    Chapter 263 A New Technique for Surface Acoustic Wave Speed Measurement in Laterally Inhomogeneous Materials
  225. Altmetric Badge
    Chapter 264 Interpretation of Surface Wave Signals following Multiple Specular Reflections in an Acoustic Microscope
  226. Altmetric Badge
    Chapter 265 Development of an Apertured-Confocal Acoustic Microscope
  227. Altmetric Badge
    Chapter 267 A Digital Signal Processing for Measuring Leaky Surface Wave Velocity with C-Scan Acoustic Microscope
  228. Altmetric Badge
    Chapter 268 Recent Developments with the Dripless Bubbler Ultrasonic Scanner
  229. Altmetric Badge
    Chapter 269 A Guided Wave Resonance Matching Technique for in Situ Monitoring of Powder Injection Molded Products
  230. Altmetric Badge
    Chapter 270 Surface Monitoring by Combination of an Optical Sensor and an Ultrasonic Scanning System
  231. Altmetric Badge
    Chapter 271 Measurement of Viscosity in Liquids Using Reflection Coefficient: Phase Difference Method
  232. Altmetric Badge
    Chapter 272 Synthetic Aperture Focusing Techniques in the Near Field of a Focused Transducer
  233. Altmetric Badge
    Chapter 273 Impact of Quantization Noise on the Quality of Ultrasonic Signal Deconvolution
  234. Altmetric Badge
    Chapter 274 Joint Time-Frequency Processing of Ultrasonic Signals
  235. Altmetric Badge
    Chapter 275 Choice of Coded Waveform and Correlation Filter for Self-Noise Suppression in Ultrasonic Correlation Systems
  236. Altmetric Badge
    Chapter 276 Integrity Monitoring of Pressurized Gas Cylinders Using the SSUE Technique
  237. Altmetric Badge
    Chapter 277 Nondestructive Testing Potential of a Magnetoacoustic Storage Correlator (MASC)
  238. Altmetric Badge
    Chapter 278 Effects of System’s Limitations on the Accuracy of Measured Ultrasonic Correlated Signal
  239. Altmetric Badge
    Chapter 279 Two Dimensional Multi-Frequency Eddy Current Data Fusion
  240. Altmetric Badge
    Chapter 280 Development and Testing of Rotating Probe Method for Airframe Rivet Inspection
  241. Altmetric Badge
    Chapter 282 Compensated High-Bandwidth Laser Ultrasonic Detector Based on Photo-Induced Emf in GaAs
  242. Altmetric Badge
    Chapter 284 Optical Lock-in Vibration Detection Using Photorefractive Four-Wave Mixing
  243. Altmetric Badge
    Chapter 286 Quantitative Measurement of Chrome Loss by Optical Means
  244. Altmetric Badge
    Chapter 287 Optimization of Neural Network Parameters for Defect Characterization
  245. Altmetric Badge
    Chapter 290 Industrial Applications of Laser-Based Profilometry
  246. Altmetric Badge
    Chapter 291 Minimum-Norm Least-Squares Inverse for Magnetic Flux Leakage Image Reconstruction
  247. Altmetric Badge
    Chapter 292 In-Process Monitoring for Quality Assurance of Automated Composite Fabrication
  248. Altmetric Badge
    Chapter 293 A Prototype Apparatus for Determining Changes in the Electrical Conductivity of Production Run Carbon Fibers
  249. Altmetric Badge
    Chapter 294 Eddy Current Determination of Semiconductor Liquid-Solid Interface Location and Shape
  250. Altmetric Badge
    Chapter 295 Magnetic Flux Leakage Inspection of Moving Steel Sheets
  251. Altmetric Badge
    Chapter 296 Remote Laser-Based Ultrasonic Inspection of Weld Joints for High Volume Industrial Applications
  252. Altmetric Badge
    Chapter 297 Resonance Inspection for Quality Control
  253. Altmetric Badge
    Chapter 298 Ultrasonic Gauging for On-Line Inspection of Tubes
  254. Altmetric Badge
    Chapter 300 Determination of a New Ultrasonic Indicator to Follow the Concrete Setting in Real Time
  255. Altmetric Badge
    Chapter 302 The Evolution of a Nuclear Fuel Welding and Ultrasonic Inspection Machine for Improved Quality and Process Control
  256. Altmetric Badge
    Chapter 303 A Process Sensor for Locating the Liquid-Solid Boundary through the Mold of a Casting
  257. Altmetric Badge
    Chapter 304 Analysis of Compressibility Origins in Monolithic Ceramic Suspensions Using X-Ray Imaging Techniques
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

wikipedia
4 Wikipedia pages

Citations

dimensions_citation
39 Dimensions

Readers on

mendeley
8 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Review of Progress in Quantitative Nondestructive Evaluation
Published by
Springer US, December 2012
DOI 10.1007/978-1-4613-0383-1
ISBNs
978-1-4613-8027-6, 978-1-4613-0383-1
Editors

Thompson, Donald O., Chimenti, Dale E.

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 8 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
United Kingdom 1 13%
Unknown 7 88%

Demographic breakdown

Readers by professional status Count As %
Student > Postgraduate 2 25%
Student > Ph. D. Student 1 13%
Researcher 1 13%
Professor > Associate Professor 1 13%
Unknown 3 38%
Readers by discipline Count As %
Engineering 2 25%
Computer Science 1 13%
Unknown 5 63%