↓ Skip to main content

Supercollider 3

Overview of attention for book
Cover of 'Supercollider 3'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 The Magnet Database System
  3. Altmetric Badge
    Chapter 2 Two Dimensional Magnetic Field Calculations for the SSC Dipole Magnets
  4. Altmetric Badge
    Chapter 3 Magnetic Field Calculations in the End Sections of SSC Dipole Magnets
  5. Altmetric Badge
    Chapter 4 Collider Dipole Magnet Producibility
  6. Altmetric Badge
    Chapter 5 Effect of Manufacturing Tolerances on the Multipoles of the SSC Dipole Magnet
  7. Altmetric Badge
    Chapter 6 Tooling and Process Parameter Improvements Leading to Improved Dimensional Control of the Cured SSC Dipole Coils
  8. Altmetric Badge
    Chapter 7 Cryogenic Toughness and Welding of High Manganese Non-Magnetic Steel: Application to the SSC Dipole Magnet
  9. Altmetric Badge
    Chapter 8 Recent Advances in the Development of Cryogenic Steels
  10. Altmetric Badge
    Chapter 9 Superconducting Magnet Insulators: Radiation-Induced Damage and Effects
  11. Altmetric Badge
    Chapter 10 Development of High-Strength Nonmagnetic Stainless Steel for the SSC
  12. Altmetric Badge
    Chapter 11 Manufacturing High-Grade Electrical Steel Plate and Investigation Results on Homogeneity of Magnetic Properties of the Materials
  13. Altmetric Badge
    Chapter 12 Mechanical Properties and Warm Prestress of Ultra-Low Carbon Steel at 4 K
  14. Altmetric Badge
    Chapter 13 Brittle Behavior of SSC Yokes
  15. Altmetric Badge
    Chapter 14 Stress Relaxation in SSC Collared Coils and Their Component Materials
  16. Altmetric Badge
    Chapter 15 Investigation of the Elastic Modulus of SSC Coils
  17. Altmetric Badge
    Chapter 16 Alternative Concepts for Structurally Supporting the Cold Mass of a Superconducting Accelerator Magnet
  18. Altmetric Badge
    Chapter 17 The SSC Field Bus: A High-Performance Control System Front End Concentrator for “Slow” Accelerator Controls
  19. Altmetric Badge
    Chapter 18 SSC Spool Piece Design
  20. Altmetric Badge
    Chapter 19 Conceptual Design for the Thermal Shield Bridges and Multilayer Insulation in the Interconnect Region for the SSC
  21. Altmetric Badge
    Chapter 20 Feasibility of Large Superconducting Toroids
  22. Altmetric Badge
    Chapter 21 Conceptual Design of Signal Cable Feedthrus for an SSC Proposed Liquid Argon Calorimeter
  23. Altmetric Badge
    Chapter 22 A Warm Liquid Forward Calorimeter for the SSC — A New Technology with New Challenges
  24. Altmetric Badge
    Chapter 23 SSC Dipole Magnet Statistical Process Control and Automated Data Collection During Production
  25. Altmetric Badge
    Chapter 24 Proposal for a Cryogenic Magnetic Field Measurement System for SSC Dipole Magnets
  26. Altmetric Badge
    Chapter 25 Design and Analysis of the 50 mm Collider Dipole Vacuum Vessel
  27. Altmetric Badge
    Chapter 26 Proposal for an Approach to Achieve CDM Reliability
  28. Altmetric Badge
    Chapter 27 An Engineering Design Study of the Dipole Magnet Cold Mass End Shell for the Superconducting Super Collider
  29. Altmetric Badge
    Chapter 28 A Frequency Response Study of Dipole Magnet Cold Mass for the Superconducting Super Collider
  30. Altmetric Badge
    Chapter 29 Alternate Design Concept for the SSC Dipole Magnet Cryogenic Support Post
  31. Altmetric Badge
    Chapter 30 Measurement Data Taken During the Industrial Fabrication of the HERA Superconducting Quadrupoles
  32. Altmetric Badge
    Chapter 31 Effect of Prestress on Performance of a 1.8 m SSC R&D Dipole
  33. Altmetric Badge
    Chapter 32 Improved Method of SSC Strain Gauge Calibration at Cryogenic Temperatures
  34. Altmetric Badge
    Chapter 33 Criteria for the Prevention of Filament and Wire Breaking During the Fabrication of Multifilamentary Composite Superconducting Wire
  35. Altmetric Badge
    Chapter 34 Some Designs of Nb 3 Sn Conductors for Special Accelerator Magnets
  36. Altmetric Badge
    Chapter 35 Ferromagnetic Material in the Superconductor and Its Effect on the Magnetization Sextupole and Decapole in the SSC Dipoles at Injection
  37. Altmetric Badge
    Chapter 36 Electroplated Superconducting Wire
  38. Altmetric Badge
    Chapter 37 Production Experience in Manufacturing Superconductor for the SSC
  39. Altmetric Badge
    Chapter 38 The Effect of Particulate Debris on the Insulation Integrity of SSC Coils During Molding and Collaring
  40. Altmetric Badge
    Chapter 39 Carbon Fiber Structure for B.G.O. Crystals of an Electromagnetic Calorimeter for Energies Around and Above 2 GeV
  41. Altmetric Badge
    Chapter 40 Magnetization Decay Properties in NbTi Multifilamentary Superconducting Wires
  42. Altmetric Badge
    Chapter 41 Shell Hoop Prestress Generated by Welding
  43. Altmetric Badge
    Chapter 42 A-E/CM Role and Responsibilities
  44. Altmetric Badge
    Chapter 43 Opportunities for Innovation
  45. Altmetric Badge
    Chapter 44 A Barium Fluoride Crystal Calorimeter for the SSC
  46. Altmetric Badge
    Chapter 45 Warm Liquid Calorimeter Design Derived from Engineering Baseline Concepts
  47. Altmetric Badge
    Chapter 46 Liquid Argon Calorimetry
  48. Altmetric Badge
    Chapter 47 Liquid Xenon Detector Engineering
  49. Altmetric Badge
    Chapter 48 Engineering Issues of SPACAL Calorimetry for the Superconducting Super Collider
  50. Altmetric Badge
    Chapter 49 Education Programs at the DOE National Laboratories: Benefits to Teachers and Students
  51. Altmetric Badge
    Chapter 50 National Laboratories and Industry Partnerships: Statewide Models
  52. Altmetric Badge
    Chapter 51 Qualification of Technical Personnel for Employment during Construction and Operation of the SSC
  53. Altmetric Badge
    Chapter 52 The Fundamental Particles and Interactions Wall Chart, The Teaching of Contemporary Physics, and the Future of the SSC
  54. Altmetric Badge
    Chapter 53 The Collider Dipole Magnet Program
  55. Altmetric Badge
    Chapter 54 Status of 4-cm Aperture, 17-m-Long SSC Dipole Magnet R&D Program at BNL Part I: Magnet Assembly
  56. Altmetric Badge
    Chapter 55 Initial Results from 50mm Short SSC Dipoles at Fermilab
  57. Altmetric Badge
    Chapter 56 SSC 50 mm Dipole Cross Section
  58. Altmetric Badge
    Chapter 57 A Design Approach to Achieving the Field Uniformity Requirements for the SSC Dipole Magnets
  59. Altmetric Badge
    Chapter 58 Fabrication and Test of a 5-cm Aperture, 1-m Long SSC Collider Dipole Magnet
  60. Altmetric Badge
    Chapter 59 Design and A. C. Loss Considerations for the 60 mm Dipole Magnet in the High Energy Booster
  61. Altmetric Badge
    Chapter 60 Medical Applications of Accelerators
  62. Altmetric Badge
    Chapter 61 SMES—A Powerful Approach to Energy Conservation
  63. Altmetric Badge
    Chapter 62 Summary of the Performance of Strand Produced for the 1990 SSC Dipole Program
  64. Altmetric Badge
    Chapter 63 Filament and Critical Current Degradations in Extracted Strands of SSC Cable
  65. Altmetric Badge
    Chapter 64 Development of Superconducting Wire and Cable for the SSC Project in Sumitomo Electric Industries
  66. Altmetric Badge
    Chapter 65 Superconductors with 2.5 Micron NbTi Filaments
  67. Altmetric Badge
    Chapter 66 Issues and Results in the Development of 2.5 Micron Filament Strand for the HEB
  68. Altmetric Badge
    Chapter 67 The Quality Assurance of Superconducting Wire and Cable for SSC Magnets
  69. Altmetric Badge
    Chapter 68 Quantification of Systematic Error in I c Testing
  70. Altmetric Badge
    Chapter 69 How Detector Collaborations Evolved; A Personal Recollection
  71. Altmetric Badge
    Chapter 70 Status with Development and Production of Equipment for the UNK (The Role of Industry)
  72. Altmetric Badge
    Chapter 71 An Overview of the SSC Synchrotron RF Systems
  73. Altmetric Badge
    Chapter 72 Linac RF Systems for the SSC
  74. Altmetric Badge
    Chapter 73 Early Stages in the Development of the Global RF Feedback for the SSC Low Energy Booster
  75. Altmetric Badge
    Chapter 74 Kicker Magnet Systems for the Injector Synchrotrons
  76. Altmetric Badge
    Chapter 75 A High Performance Architecture for Accelerator Controls
  77. Altmetric Badge
    Chapter 76 Refrigeration Plants for the SSCL
  78. Altmetric Badge
    Chapter 77 Design of a Large 2.0 K Refrigerator for CEBAF
  79. Altmetric Badge
    Chapter 78 A Helium Venting Model for a SSC Half Cell
  80. Altmetric Badge
    Chapter 79 Design of the Multilayer Insulation System for the Superconducting Super Collider 50 mm Dipole Cryostat
  81. Altmetric Badge
    Chapter 80 Integrated Cryogenic Sensors
  82. Altmetric Badge
    Chapter 81 Process Design Features of the SSC MTL Cryogenic System
  83. Altmetric Badge
    Chapter 82 Control System Design Considerations for the SSC Magnet Test Laboratory Cryogenic System
  84. Altmetric Badge
    Chapter 83 Transient Shielded Cryogenic Containers
  85. Altmetric Badge
    Chapter 84 Charge Correlation Measurements of Double-Sided Direct-Coupled Silicon Microstripe Detectors
  86. Altmetric Badge
    Chapter 85 Applications for a New Time Digitizer in SSC Experiments
  87. Altmetric Badge
    Chapter 86 Rad-Hard Electronics Study for SSC Detectors
  88. Altmetric Badge
    Chapter 87 Development of a Custom Monolithic Device for Data Acquisition from a Scintillating Calorimeter at the Superconducting Super Collider
  89. Altmetric Badge
    Chapter 88 Development of Pixel Detectors for SSC Vertex Tracking
  90. Altmetric Badge
    Chapter 89 A Superconducting Air Core Toroid Muon Spectrometer for the Empact/Texas Detector
  91. Altmetric Badge
    Chapter 90 Environmental Impacts of the Super Collider
  92. Altmetric Badge
    Chapter 91 Safety in Handling Helium and Nitrogen
  93. Altmetric Badge
    Chapter 92 Application of System Safety Engineering Techniques for Hazard Prevention at the Superconducting Super Collider
  94. Altmetric Badge
    Chapter 93 Shielding Calculations for SSC
  95. Altmetric Badge
    Chapter 94 Design Development for the 50mm Superconducting Super Collider Dipole Cryostat
  96. Altmetric Badge
    Chapter 95 The Mechanical Response of the SSC Dipole Magnet to Ground Motion
  97. Altmetric Badge
    Chapter 96 Design of a Thermal Expansion Joint for the SSC Magnet Leads
  98. Altmetric Badge
    Chapter 97 SSC Dipole Magnet Accelerated Life Test Program
  99. Altmetric Badge
    Chapter 98 Stability of Bellows Used as Expansion Joints Between Superconducting Magnets in Accelerators
  100. Altmetric Badge
    Chapter 99 Investigation of Factors Affecting the Calibration of Strain Gage Based Transducers (‘Goodzeit Gages’) for SSC Magnets
  101. Altmetric Badge
    Chapter 100 Systems Engineering at the Superconducting Super Collider (One Year Later)
  102. Altmetric Badge
    Chapter 101 A Practical Systems Engineering Process for Integrating SSC Collider Ring Components
  103. Altmetric Badge
    Chapter 102 SSC Accelerator Availability Allocation
  104. Altmetric Badge
    Chapter 103 Technology Transfer Considerations for the Collider Dipole Magnet
  105. Altmetric Badge
    Chapter 104 A System Approach to the Design of Superconducting Magnets
  106. Altmetric Badge
    Chapter 105 Team-Based Organization for Collider Dipole Magnet (CDM) Development and Production
  107. Altmetric Badge
    Chapter 106 Designing Superconducting Magnets for Reliability and Availability
  108. Altmetric Badge
    Chapter 107 Collider Dipole Magnet Test Program From Development Through Production
  109. Altmetric Badge
    Chapter 108 Document Format Considerations for a Document Tracking and Storage System
Overall attention for this book and its chapters
Altmetric Badge

Citations

dimensions_citation
3 Dimensions

Readers on

mendeley
18 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Supercollider 3
Published by
Springer US, December 2012
DOI 10.1007/978-1-4615-3746-5
ISBNs
978-1-4613-6668-3, 978-1-4615-3746-5
Editors

Nonte, John

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 18 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
United Kingdom 1 6%
Chile 1 6%
Ecuador 1 6%
Unknown 15 83%

Demographic breakdown

Readers by professional status Count As %
Student > Master 7 39%
Student > Ph. D. Student 5 28%
Professor > Associate Professor 2 11%
Student > Doctoral Student 1 6%
Researcher 1 6%
Other 1 6%
Unknown 1 6%
Readers by discipline Count As %
Arts and Humanities 6 33%
Computer Science 5 28%
Engineering 4 22%
Materials Science 1 6%
Design 1 6%
Other 0 0%
Unknown 1 6%