↓ Skip to main content

COMADEM 89 International

Overview of attention for book
Cover of 'COMADEM 89 International'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Introduction
  3. Altmetric Badge
    Chapter 2 Total Quality in NDT and Condition Monitoring
  4. Altmetric Badge
    Chapter 3 Condition-based Maintenance — Where to Next?
  5. Altmetric Badge
    Chapter 4 Condition Monitoring in Manufacture
  6. Altmetric Badge
    Chapter 5 Assessment of Symptom Limit Value in Vibration Condition Monitoring
  7. Altmetric Badge
    Chapter 6 Turbomachinery Failure Detection — Combination of Transfer Matrix and Finite Element Method
  8. Altmetric Badge
    Chapter 7 Diagnostic for Mechanical Systems through Analysing Variations in Vibration Signatures
  9. Altmetric Badge
    Chapter 8 Identification and Digital Control of a Turbo-charged Marine Diesel Engine
  10. Altmetric Badge
    Chapter 9 Condition Monitoring and Diagnostic of a Diesel Engine through Detecting Changes in Estimated Dynamic Models
  11. Altmetric Badge
    Chapter 10 The Fulmer Method of Monitoring Fluid Abrasivity as an Indication of Fluid Condition and Machine Health
  12. Altmetric Badge
    Chapter 11 Practical Gear Fault Diagnosis Using Vibration-based Methods
  13. Altmetric Badge
    Chapter 12 COMPASS: A Generalized Ground-based Monitoring System
  14. Altmetric Badge
    Chapter 13 Computer-aided Machine Health Monitoring
  15. Altmetric Badge
    Chapter 14 A Revolution in Rotating Machinery Monitoring
  16. Altmetric Badge
    Chapter 15 Inspection of Re-manufactured Gearboxes Using Noise Analysis
  17. Altmetric Badge
    Chapter 16 Reliability of Aircraft High Lift Devices
  18. Altmetric Badge
    Chapter 17 A Design Study of a Production Centrifuge with Respect to Maintainability and Condition Monitoring
  19. Altmetric Badge
    Chapter 18 A Personal Computer Based Burn-in System
  20. Altmetric Badge
    Chapter 19 Development of a Micro-computer Based System for On-line Monitoring of the Reliability Characteristics of a Recycle Gas Compressor
  21. Altmetric Badge
    Chapter 20 A Fiscal and Process Controller for a Hardboard Mill
  22. Altmetric Badge
    Chapter 21 The Assessment of Availability through Simulation
  23. Altmetric Badge
    Chapter 22 Automatic Environmental Monitoring
  24. Altmetric Badge
    Chapter 23 A Supervisory Officer’s Guide to Effective Interviewing/Counselling of Personnel Suspected of Having an Alcohol Dependency Problem
  25. Altmetric Badge
    Chapter 24 System for Real Time Process Monitoring and Adaptive Control during CNC Deep Hole Drilling
  26. Altmetric Badge
    Chapter 25 Plant Health Monitoring Using a Turbine Flowmeter
  27. Altmetric Badge
    Chapter 26 Real Time Monitoring of Roll Cooling Water Flow Rate
  28. Altmetric Badge
    Chapter 27 Health Monitoring of Motorised Valve Actuators and Similar Devices
  29. Altmetric Badge
    Chapter 28 Blanking Process Characterization Using Acoustic Emission
  30. Altmetric Badge
    Chapter 29 A Monitor for the Cooling System of a Large Electrical Generator
  31. Altmetric Badge
    Chapter 30 Pump Performance — Its Application to Condition Monitoring
  32. Altmetric Badge
    Chapter 31 The Monitoring of the Alignment of Continuous Casting Machines
  33. Altmetric Badge
    Chapter 32 The Adaptive Acoustic Monitoring of Aircraft Engines
  34. Altmetric Badge
    Chapter 33 Power System Network Loadflow Management Using Fuzzy Knowledge-based Expert System
  35. Altmetric Badge
    Chapter 34 Towards Unmanned Manufacture: Applications of an Expert System
  36. Altmetric Badge
    Chapter 35 Expert Systems Applied to Gas Turbine Condition Monitoring
  37. Altmetric Badge
    Chapter 36 Post Flight Analysis of EH101 Helicopter Maintenance Data
  38. Altmetric Badge
    Chapter 37 A Strategy of Knowledge Elicitation for the Monitoring and Control of Industrial Processes
  39. Altmetric Badge
    Chapter 38 Computerised Technical Documentation
  40. Altmetric Badge
    Chapter 39 A Diagnostic Expert System Which Generates Explanations
  41. Altmetric Badge
    Chapter 40 The Application of Expert Systems and Computer Simulation Technologies to Process Monitoring and Control
  42. Altmetric Badge
    Chapter 41 Computer-assisted Analysis of Evoked Transients
  43. Altmetric Badge
    Chapter 42 Development of Computer-aided Data Acquisition, Control and Analysis System (CADACAS) for Remote Condition Monitoring
  44. Altmetric Badge
    Chapter 43 Data Acquisition System for High Strain Fatigue Testing
  45. Altmetric Badge
    Chapter 44 On Maintaining and Reasoning with Incomplete Information
  46. Altmetric Badge
    Chapter 45 Decision Support Systems for Manufacturing Management
  47. Altmetric Badge
    Chapter 46 Concurrent System Behaviour
  48. Altmetric Badge
    Chapter 47 Inspect or Monitor? — How to Choose Maintenance Policy by Matrix Algebra
  49. Altmetric Badge
    Chapter 48 Maintenance Management Technique for Small-sized Road Construction Companies
  50. Altmetric Badge
    Chapter 49 Condition-based Maintenance System Engineering
  51. Altmetric Badge
    Chapter 50 Effective Machinery Fault Diagnosis Avoids Unnecessary Gearbox Maintenance (Case Study)
  52. Altmetric Badge
    Chapter 51 Automatic Condition Monitoring in the Hot Strip Mill of Rautaruukki Oy Raahe Steel Works
  53. Altmetric Badge
    Chapter 52 On-line Surveillance for Predictive Maintenance in a Hazardous Environment
  54. Altmetric Badge
    Chapter 53 Cost-effective Condition Monitoring
  55. Altmetric Badge
    Chapter 54 Debris Counting for Consistent Monitoring
  56. Altmetric Badge
    Chapter 55 Monitoring Liquid Levels
  57. Altmetric Badge
    Chapter 56 Why Put Up with Bearing Failures?
  58. Altmetric Badge
    Chapter 57 Computerised Maintenance Scheme for a Process Industry Using Monte-Carlo Simulation Technique
  59. Altmetric Badge
    Chapter 58 The Fundamentals of, and the Application of Computers to, Condition Monitoring and Predictive Maintenance
  60. Altmetric Badge
    Chapter 59 The Use of Thermography in Industrial Predictive Maintenance
  61. Altmetric Badge
    Chapter 60 Set Vibration Alarm Levels without Guesswork
  62. Altmetric Badge
    Chapter 61 Sampling Techniques for Monitoring Sinusoidal Waveforms
  63. Altmetric Badge
    Chapter 62 Surface Temperature and Heat Flow Measurement
  64. Altmetric Badge
    Chapter 63 High Quality Non-contact Measurement Using Capacitance Gauges
  65. Altmetric Badge
    Chapter 64 Analysis of Sigma Delta Modulators
  66. Altmetric Badge
    Chapter 65 Dynamic Tip Clearance Measurements in Axial Flow Compressors
  67. Altmetric Badge
    Chapter 66 A Portable Scanning Laser Vibrometer for Surface Vibration Analysis
  68. Altmetric Badge
    Chapter 67 Clean Window Design for Optical Access
  69. Altmetric Badge
    Chapter 68 Numerical Solution of the Matrix Riccati Equation for a Time Variant Jet Engine System
  70. Altmetric Badge
    Chapter 69 Non-linear Optimal Tracking Problem for Jet Engine Control
  71. Altmetric Badge
    Chapter 70 Technical Diagnostics of Shafts and Bearings by Analysing Relative Speeds
  72. Altmetric Badge
    Chapter 71 Ferrogram Quantitive Analyser — Its Application in Industry
  73. Altmetric Badge
    Chapter 72 Methods and Experiences in the Application of Technical Diagnosis for Prevention and Early Detection of Damages to Components of the Water-Steam-Cycle of Thermal Power Stations
  74. Altmetric Badge
    Chapter 73 An Experimental Facility for Investigation into the Control and Monitoring of Energy Consumption of VAV and CAV Air Conditioning Systems
  75. Altmetric Badge
    Chapter 74 Advanced Control Techniques for BEMS
  76. Altmetric Badge
    Chapter 75 Energy Management and Optimisation Using Adaptive Control Techniques
  77. Altmetric Badge
    Chapter 76 Monitoring and Control of Unmanned Machinery at Sea
  78. Altmetric Badge
    Chapter 77 Condition Monitoring for Fatigue — Implications of Fatigue Crack Shape
  79. Altmetric Badge
    Chapter 78 Biofouling on Offshore Installations — An Impact and Monitoring Assessment
  80. Altmetric Badge
    Chapter 79 The Monitoring of Industrial Processes Using Ultrasound
  81. Altmetric Badge
    Chapter 80 Condition Monitoring of British Gas Pipelines
  82. Altmetric Badge
    Chapter 81 Research on Quantitative Ferrography Technology
  83. Altmetric Badge
    Chapter 82 Wear Detection of a Vane Pump Using a Novel Flowmeter Phenomenon
  84. Altmetric Badge
    Chapter 83 Condition Monitoring Using Conventional Process Instrumentation
  85. Altmetric Badge
    Chapter 84 Condition Monitoring of Bends in Pneumatic Conveying Systems
  86. Altmetric Badge
    Chapter 85 Stress Wave Sensing — A New Measurand for Condition Monitoring
  87. Altmetric Badge
    Chapter 86 Novel Adaptive Control Schemes for Peripheral Milling
  88. Altmetric Badge
    Chapter 87 A New Technique for Condition Monitoring of Rolling Element Bearings Using a Portable Data Collector
  89. Altmetric Badge
    Chapter 88 On Condition Monitoring and Maintenance
  90. Altmetric Badge
    Chapter 89 Computer-based Training in Statistical Quality Control
  91. Altmetric Badge
    Chapter 90 A Project to Examine the Use of Open Learning Techniques in COMADEM
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

facebook
1 Facebook page

Citations

dimensions_citation
3 Dimensions

Readers on

mendeley
1 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
COMADEM 89 International
Published by
Springer US, December 2012
DOI 10.1007/978-1-4684-8905-7
ISBNs
978-1-4684-8907-1, 978-1-4684-8905-7
Editors

Rao, Raj B. K. N., Hope, A. D.

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 1 Mendeley reader of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 1 100%

Demographic breakdown

Readers by professional status Count As %
Student > Postgraduate 1 100%
Readers by discipline Count As %
Engineering 1 100%