↓ Skip to main content

Advances in Manufacturing Processes

Overview of attention for book
Cover of 'Advances in Manufacturing Processes'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Development of Finite Element Model to Predict Temperature and Residual Stress Distribution in Gas Tungsten Arc Welded AA 5059 Aluminium Alloy Joints
  3. Altmetric Badge
    Chapter 2 Strain Analysis of AA6063 Aluminum Alloy by Tube Hydroforming Process
  4. Altmetric Badge
    Chapter 3 Performance Indices of Hot Liquid Sodium-Exposed Sacrificial Surface Layers in Fast Breeder Reactors
  5. Altmetric Badge
    Chapter 4 Turning Studies on A356-TiB 2 /TiC In Situ Reinforced Composites
  6. Altmetric Badge
    Chapter 5 Optimization of Dissimilar Friction Stir Welding Process Parameters of AA5083-H111 and AA6082-T6 by CCD-RSM Technique
  7. Altmetric Badge
    Chapter 6 Effect of Flushing on Electrochemical Micromachining of Copper and Inconel 718 Alloy
  8. Altmetric Badge
    Chapter 7 Comparative Study of Cutting Fluid Application Methods to Improve Machining Conditions During Surface Grinding on AISI 1040 Steel
  9. Altmetric Badge
    Chapter 8 Influence of Friction Coefficient and Failure Model in 3D FEA Simulation of Drilling of Glass Fiber Reinforced Polymer Composites
  10. Altmetric Badge
    Chapter 9 Surface Characteristics of Drilled Holes in Al–TiB 2  Metal Matrix Composites Using Electric Discharge Machine
  11. Altmetric Badge
    Chapter 10 Development of an Expert System to Monitor Casting Defects in Foundries
  12. Altmetric Badge
    Chapter 11 Influence of Design Parameters on Composite and Noncomposite Space Truss Structure Analysed Using ANSYS
  13. Altmetric Badge
    Chapter 12 Improve the Wear Property of En19 Steel by Boronizing Process
  14. Altmetric Badge
    Chapter 13 Reduction of Wrinkling Defect in Deep Drawing Process
  15. Altmetric Badge
    Chapter 14 Surface Roughness Evaluation of Milled Surfaces by Image Processing of Speckle and White-Light Images
  16. Altmetric Badge
    Chapter 15 On Processing of Ni–WC8Co-based Composite Clads on Austenitic Stainless Steel Through Microwave Energy
  17. Altmetric Badge
    Chapter 16 Application of TOPSIS to Optimize EDM Process Parameters for Small-Hole Drilling of Inconel 718
  18. Altmetric Badge
    Chapter 17 Tool Wear Analysis While Creating Blind Holes on Float Glass Using Conventional Drilling: A Multi-shaped Tools Study
  19. Altmetric Badge
    Chapter 18 Effect of Surface Modification Using GTAW as Heat Source and Cryogenic Treatment on the Surface Hardness and Its Prediction Using Artificial Neural Network
  20. Altmetric Badge
    Chapter 19 Laser Cladding of Nickel Powder on AISI 202 Stainless Steel and Optimization of the Process Parameters
  21. Altmetric Badge
    Chapter 20 Damage Sensing Through Electrical Resistive Measurement Using Electrospun PVDF-CNF Sensor
  22. Altmetric Badge
    Chapter 21 Investigations on Fabrication Techniques of Aluminium-Based Porous Material
  23. Altmetric Badge
    Chapter 22 Optimization of Electrical Parameters for Machining of Ti–6Al–4V Through TOPSIS Approach
  24. Altmetric Badge
    Chapter 23 A Study on Machinability of Leather Using CO 2 -Based Laser Beam Machining Process
  25. Altmetric Badge
    Chapter 24 Structural Health Monitoring of Glass Fiber Reinforced Polymer Using Nanofiber Sensor
  26. Altmetric Badge
    Chapter 25 A Sensitization Studies on the Metallurgical and Corrosion Behavior of AISI 304 SS Welds
  27. Altmetric Badge
    Chapter 26 A Study on Friction Stir Welding of Al6061-ZrB 2 Metal Matrix Composites
  28. Altmetric Badge
    Chapter 27 Analysis of Machinability on WEDM Processed Titanium Alloy with Coated Electrodes
  29. Altmetric Badge
    Chapter 28 Multi-response Optimization of Machining Parameters in EDM Using Square-Shaped Nonferrous Electrode
  30. Altmetric Badge
    Chapter 29 Analysis and Optimization on Functionally Graded Rotating Disk Using Grey Relational Method
  31. Altmetric Badge
    Chapter 30 Investigation on the Process Parameters of Double-Sided Friction Stir Welded AA6082-T 6 Joints with Different Tool Pins Using Response Surface Methodology
  32. Altmetric Badge
    Chapter 31 Interfacial Science in Metal–Ceramic Joining for Thermoelectric Module
  33. Altmetric Badge
    Chapter 32 Experimental Investigation of Spherical Core Sandwich Structure by Beam Flexure
  34. Altmetric Badge
    Chapter 33 Parameter Design and Analysis in Friction Welding of Brass Material Using Grey Relational Analysis
  35. Altmetric Badge
    Chapter 34 Multi-objective Optimization Using Taguchi’s Loss Function-Based Principal Component Analysis in Electrochemical Discharge Machining of Micro-channels on Borosilicate Glass with Direct and Hybrid Electrolytes
  36. Altmetric Badge
    Chapter 35 Flutter Analysis of Supersonic Low Aspect Ratio Composite Wings Using FSI Methodology
  37. Altmetric Badge
    Chapter 36 Experimental Analysis of Surface Roughness of Duplex Stainless Steel in Milling Operation
  38. Altmetric Badge
    Chapter 37 Optimization of Machining Parameters of Inconel 718 by WEDM Using Response Surface Methodology
  39. Altmetric Badge
    Chapter 38 Analysis and Evaluation of Different Heat Treatment Fixture Designs Inspired from 3D Infill Patterns
  40. Altmetric Badge
    Chapter 39 Stress Analysis on Functionally Graded Spur Gear
  41. Altmetric Badge
    Chapter 40 Experimental Investigation on Heat Transfer Analysis of Fins
  42. Altmetric Badge
    Chapter 41 Multi-response Optimization of Process Parameters in Laser Drilling of AA6061-TiB 2 /ZrB 2 In Situ Composite Produced by K 2 TiF 6 -KBF 4 -K 2 ZrF 6 Reaction System
  43. Altmetric Badge
    Chapter 42 Influence of Nanoparticles-Suspended Electrolyte on Machinability of Stainless Steel 430 Using Electrochemical Micro-machining Process
  44. Altmetric Badge
    Chapter 43 Influence of Tool Electrodes on Machinability of Stainless Steel 420 Using Electrochemical Micromachining Process
  45. Altmetric Badge
    Chapter 44 Parametric Optimization of Abrasive Water jet Machining Process on Inconel 600 Using Two Different Abrasive Grain Sizes
  46. Altmetric Badge
    Chapter 45 Experimental Investigation of Electrochemical Micro-machining Process Parameters on Stainless Steel 316 Using Sodium Chloride Electrolyte
  47. Altmetric Badge
    Chapter 46 Optimization of Machining Parameters on Laser Beam Machining of Titanium Alloy (Ti 3Al-2.5V) Using Taguchi Method
  48. Altmetric Badge
    Chapter 47 Parametric Optimization of Abrasive Water Jet Machining of Beryllium Copper Using Taguchi Grey Relational Analysis
  49. Altmetric Badge
    Chapter 48 Investigation of Surface Damages in Hole Making on Luffa/Jute/Glass Reinforced Plastics
  50. Altmetric Badge
    Chapter 49 Defect Rectification in Forging Operation and Optimizing the Process Parameters
  51. Altmetric Badge
    Chapter 50 Wire Electrical Discharge Machining Integrity Studies on the Aluminium Nanocomposite
  52. Altmetric Badge
    Chapter 51 Influence of Multi-hole Technique on Fabrication of Surface Nanocomposite by Friction Stir Processing
  53. Altmetric Badge
    Chapter 52 Accelerated Testing Model Prediction of Fatigue Life of AA5083-H111—AA6061-T6 Friction Stir Weldment
  54. Altmetric Badge
    Chapter 53 Development of Mathematical Models and Evaluation of the Optimal Process Parameters for Laser Surface Hardening of Low Alloy Steel Using Elitist Non-dominated Sorting Genetic Algorithm
  55. Altmetric Badge
    Chapter 54 Effectiveness of Cryogenic Cooling in Turning of Inconel 625 Alloy
  56. Altmetric Badge
    Chapter 55 Crashworthiness Analysis of a Novel Aluminum Bi-tubular Corrugated Tube—Experimental Study
  57. Altmetric Badge
    Chapter 56 Design Analysis and Optimization of Electric Solenoid Shroud for Starter Motor Used in Mild Hybrid Passenger Car
  58. Altmetric Badge
    Chapter 57 Shock and Vibration Prevention Using Angular Mounts with Different Types of Oil-Based Elastomers
  59. Altmetric Badge
    Chapter 58 Retrofitting of RC Beams Using Polymer Ferrocement Laminates—Laboratory Model Study and Finite Element Analysis
  60. Altmetric Badge
    Chapter 59 Comparative Evaluation TIG and FS Welding of Cast Al–Mg–Sc Alloy
  61. Altmetric Badge
    Chapter 60 Effect of Continuous and Pulsed Current Tungsten Inert Gas Welding of Cast Al–Mg–Sc Alloy
  62. Altmetric Badge
    Chapter 61 Tool Pin Profile Studies on Friction Stir Welded Joints of AA5052-H32 and AA6061-T6 Aluminum Alloys
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Citations

dimensions_citation
3 Dimensions

Readers on

mendeley
30 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Advances in Manufacturing Processes
Published by
Springer Singapore, October 2018
DOI 10.1007/978-981-13-1724-8
ISBNs
978-9-81-131723-1, 978-9-81-131724-8
Editors

Vijay Sekar, K. S., Gupta, Manoj, Arockiarajan, A.

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 30 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 30 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 4 13%
Other 2 7%
Student > Master 2 7%
Professor 1 3%
Student > Doctoral Student 1 3%
Other 2 7%
Unknown 18 60%
Readers by discipline Count As %
Engineering 7 23%
Materials Science 3 10%
Mathematics 1 3%
Psychology 1 3%
Unknown 18 60%