↓ Skip to main content

Towards determination of critical speeds of a rotating shaft with eccentric sleeves: equations of motion

Overview of attention for book
Cover of 'Towards determination of critical speeds of a rotating shaft with eccentric sleeves: equations of motion'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Vibration Sensitivity of Large Turbine Generator Shaft Trains to Unbalance
  3. Altmetric Badge
    Chapter 2 Turbomachinery High Speed Modal Balancing: Modeling and Testing of Scale Rotors
  4. Altmetric Badge
    Chapter 3 Application of Turbine Generator Train Rotordynamic Analysis for Setting Residual Modal Unbalance Requirements for High Speed Balancing of a Single Rotor
  5. Altmetric Badge
    Chapter 4 Development of a New Balancing Approach for Significantly Eccentric or Bowed Rotors
  6. Altmetric Badge
    Chapter 5 Conditions Required for the Elimination of Trial Runs During the Balancing of Flexible Rotors
  7. Altmetric Badge
    Chapter 6 Blade Vibration Measurements and Excitation Force Evaluation
  8. Altmetric Badge
    Chapter 7 Influence of the Blades Configuration on the Dynamics of a 3-Bladed Jeffcott Rotor
  9. Altmetric Badge
    Chapter 8 Forced Vibration of Eight Mistuned Bladed Discs on a Solid Shaft—Excitation of the Second Compressor Bladed Disc
  10. Altmetric Badge
    Chapter 9 Vibration Response Analysis of Mistuned Bladed Disk Consisting of Directionally Solidified Blade
  11. Altmetric Badge
    Chapter 10 The Influence of Blade Row Dynamics on Lateral and Torsional Shaft Vibrations in Steam Turbines
  12. Altmetric Badge
    Chapter 11 Explanation of the Snubbing Mechanism on Vibration Reduction by Means of Chaos Metrics
  13. Altmetric Badge
    Chapter 12 Efficient Modelling of Rotor-Blade Interaction Using Substructuring
  14. Altmetric Badge
    Chapter 13 Modeling Impulse Periodic Excitation of Blade Rows in Steam Turbines in Partial Arc Admission Conditions
  15. Altmetric Badge
    Chapter 14 An Improved Microslip Model for Variable Normal Loads
  16. Altmetric Badge
    Chapter 15 Nonlinear Behavior Analysis Caused by Blade Tip Rubbing in a Rotor-Disk-Blade System
  17. Altmetric Badge
    Chapter 16 Analysis of Dry Friction-Induced Stick-Slip in an Experimental Test Rig Modeling a Drill String
  18. Altmetric Badge
    Chapter 17 The Resolution of Unwanted Vibrations in Rotating Machinery
  19. Altmetric Badge
    Chapter 18 Designing and Operating Rotating Machinery Free from Vibration Troubles Based on Case Studies
  20. Altmetric Badge
    Chapter 19 Keyphasor ® Based Torsional Vibration Detection and Field Applications
  21. Altmetric Badge
    Chapter 20 Behavior of Eccentric Rotors Through the Critical Speed Range
  22. Altmetric Badge
    Chapter 21 Evaluation of Unexpected High Vibration on a High Speed Coupling Spacer
  23. Altmetric Badge
    Chapter 22 Analysis of Super-Synchronous, Sub-mesh Frequency Vibrations in a Speed Increaser Gearbox
  24. Altmetric Badge
    Chapter 23 Optimization of Low Frequency Balancing of GD-40 Rotor
  25. Altmetric Badge
    Chapter 24 Analysis and Experimental Test of a 200 kW Oil-Free Micro Gas Turbine Simulator
  26. Altmetric Badge
    Chapter 25 FEM Analysis of the SIF in Rotating Shafts Containing Breathing Elliptical Cracks
  27. Altmetric Badge
    Chapter 26 Damping in a Parametrically Excited Cracked Rotor
  28. Altmetric Badge
    Chapter 27 Experimental and Numerical Analysis of Transversal Open Cracked Shafts Considering Beam Slenderness and Crack Depth
  29. Altmetric Badge
    Chapter 28 Experimental Identification of Rotor Crack Forces
  30. Altmetric Badge
    Chapter 29 Experimental Analysis and Validation of a Vibration-Based Technique for Crack Detection in a Shaft
  31. Altmetric Badge
    Chapter 30 Fault Diagnosis and State Detection in Centrifugal Pumps—A Review of Applications
  32. Altmetric Badge
    Chapter 31 Proceedings of the 9th IFToMM International Conference on Rotor Dynamics
  33. Altmetric Badge
    Chapter 32 Order Tracking Under Run-Up and Run-Down Conditions
  34. Altmetric Badge
    Chapter 33 Proceedings of the 9th IFToMM International Conference on Rotor Dynamics
  35. Altmetric Badge
    Chapter 34 Modelling Roller Bearing Dynamics Inducing Instantaneous Angular Speed Variations
  36. Altmetric Badge
    Chapter 35 Non-linear Elasto-dynamic Model of Faulty Rolling Elements Bearing
  37. Altmetric Badge
    Chapter 36 Proceedings of the 9th IFToMM International Conference on Rotor Dynamics
  38. Altmetric Badge
    Chapter 37 Monitoring the Dynamic Behavior in Polar Domain for an Easier Diagnostic of Rotating Machinery
  39. Altmetric Badge
    Chapter 38 Signal Processing Techniques for the Identification of Wheels’ Imbalance in Presence of Disturbances
  40. Altmetric Badge
    Chapter 39 Proceedings of the 9th IFToMM International Conference on Rotor Dynamics
  41. Altmetric Badge
    Chapter 40 Model Based Automated Diagnosis of Bearing Knock Faults in Internal Combustion Engines
  42. Altmetric Badge
    Chapter 41 Low Speed Bearings’ Instantaneous Angular Speed Behavior
  43. Altmetric Badge
    Chapter 42 Instantaneous Angular Speed Analysis, Measurement Errors and Signal Filtering
  44. Altmetric Badge
    Chapter 43 Optimisation of SVM Methodology for Multiple Fault Taxonomy of Rolling Bearings from Acceleration Records
  45. Altmetric Badge
    Chapter 44 Use of Acoustic Emissions for the Detection of Rub of Rotors
  46. Altmetric Badge
    Chapter 45 Multi Fault Diagnosis of the Centrifugal Pump Using the Wavelet Transform and Principal Component Analysis
  47. Altmetric Badge
    Chapter 46 Impact Response Characterization as Basis for Bearing Diagnostics and Prognostics
  48. Altmetric Badge
    Chapter 47 Force Analysis Due to Local Defect in Rolling Bearings for Fault Diagnosis
  49. Altmetric Badge
    Chapter 48 Vibration-Based Spall Size Tracking in Rolling Element Bearings
  50. Altmetric Badge
    Chapter 49 Rotor Vibrations in Electrical Machines Due to Electromagnetic Forces
  51. Altmetric Badge
    Chapter 50 Experimental Investigation of Structural Damping of Laminated Stacks of Electrical Machine Rotors
  52. Altmetric Badge
    Chapter 51 Investigating Grid-Induced Turbo-Generator Vibrations: A Multidisciplinary Challenge
  53. Altmetric Badge
    Chapter 52 Rotor Vibration Difference Among the Single and the Combined Faults Composed by Static Air-Gap Eccentricity and Rotor Interturn Short Circuit
  54. Altmetric Badge
    Chapter 53 Prediction of Ultimate Coupling Torque During Transient Short-Circuit Loads of Electric Motors
  55. Altmetric Badge
    Chapter 54 Rotordyamic Analysis of a 2-Pole Induction Motor Considering Magnetic Excitation Due to Dynamic Rotor Eccentricity During Startup
  56. Altmetric Badge
    Chapter 55 Model-Based Fault Detection on a Non-linear Rotor System
  57. Altmetric Badge
    Chapter 56 Experimental Unbalance Identification by Means of Correlation Analysis and Model Order Reduction
  58. Altmetric Badge
    Chapter 57 Fault Detection in a Rotating Machine by Using the Electromechanical Impedance Method
  59. Altmetric Badge
    Chapter 58 Application of Bayesian Inference to Unbalance Identification in Rotors
  60. Altmetric Badge
    Chapter 59 Application of Multiple-Model Estimation Method to Rotor Fault Diagnosis
  61. Altmetric Badge
    Chapter 60 Application of a Model-Based Method for Balancing a Large Steam Turbo-Generator Unit
  62. Altmetric Badge
    Chapter 61 Unbalance Response Analysis of a Heavy Duty Gas Turbine-Generator with Rigid Coupling Offset
  63. Altmetric Badge
    Chapter 62 Residual Unbalance Determination for Flexible Rotors at Operational Speed
  64. Altmetric Badge
    Chapter 63 Model Validation for Damage Identification and Determination of Local Damage Dynamics
  65. Altmetric Badge
    Chapter 64 Experimental Estimation of Misalignment Effects in Rotor-Bearing-Coupling Systems
  66. Altmetric Badge
    Chapter 65 Development and Preliminary Validation of Efficient 3D Models of Tilting Pad Journal Bearings
  67. Altmetric Badge
    Chapter 66 The Effects of Temporal Fluid Inertia on Tilting Pad Journal Bearing Dynamics
  68. Altmetric Badge
    Chapter 67 Multilobe Floating Ring Bearings for Automotive Turbochargers
  69. Altmetric Badge
    Chapter 68 Influence of Bearing Geometry of Automotive Turbochargers on the Nonlinear Vibrations During Run-Up
  70. Altmetric Badge
    Chapter 69 Nonlinear Oscillations of High-Speed Rotor Systems in Semi-Floating Ring Bearings
  71. Altmetric Badge
    Chapter 70 Dynamic Forced Performance of Short Length Open-Ends Squeeze Film Damper with End Grooves
  72. Altmetric Badge
    Chapter 71 The Identification Method for Dynamic Characteristics Coefficients of Rotor Sliding Bearing Based on System Lag Angle
  73. Altmetric Badge
    Chapter 72 Effect of Square-Dimple Size on Dynamic Characteristics of Textured Journal Bearings
  74. Altmetric Badge
    Chapter 73 Geometric Discontinuities Identification in Hydrodynamic Bearings
  75. Altmetric Badge
    Chapter 74 Measurement of Drag Torque, Lift off Speed and Rotordynamic Force Coefficients in a Shimmed BFB
  76. Altmetric Badge
    Chapter 75 A Test Rig for Evaluating Tilting - Pad Journal Bearing Characteristics
  77. Altmetric Badge
    Chapter 76 Identification Dynamic Force Coefficients of a Five-Pad Tilting-Pad Journal Bearing
  78. Altmetric Badge
    Chapter 77 Construction and Experimental Application of a Variable Geometry Journal Bearing (VGJB) for the Vibration Suppression of Rotors
  79. Altmetric Badge
    Chapter 78 Multiphysics TEHD Model of a Tilting-Pad Thrust Bearing with Polymeric Layer
  80. Altmetric Badge
    Chapter 79 Efficient Thrust Bearing Model for High-Speed Rotordynamic Applications
  81. Altmetric Badge
    Chapter 80 Performances Degradation of Tilting-Pad Thrust Bearings Due to Electrical Pitting
  82. Altmetric Badge
    Chapter 81 A New Approach to Solve for Oil-Whirl and Oil-Whip Limit-Cycle Response
  83. Altmetric Badge
    Chapter 82 Dynamic Analysis of Rotors Supported on Journal Bearings by Solving Reynolds Equation Using Pseudospectral Method
  84. Altmetric Badge
    Chapter 83 Influence of Delayed Yielding of Magnetorheological Oils in Squeeze Film Dampers on the Vibration Attenuation of Rotors
  85. Altmetric Badge
    Chapter 84 Successful Elimination of a Pad-Fluttering Phenomenon
  86. Altmetric Badge
    Chapter 85 Investigation of the Thermal Effects of Tilting Pad Bearing Interacting with Fluid Seals on the Stability of Rotating Systems
  87. Altmetric Badge
    Chapter 86 Geometrical Optimization of Hydrodynamic Journal Bearings with Validated Simulations and Artificial Intelligence Tools
  88. Altmetric Badge
    Chapter 87 A Theoretical Study on Frequency Effects on Tilting-Pad Journal Bearing Dynamic Coefficients
  89. Altmetric Badge
    Chapter 88 Stability Analysis of an Unbalanced Journal Bearing with Nonlinear Hydrodynamic Forces
  90. Altmetric Badge
    Chapter 89 Analysis of the Influence of Fluid Temperature Variation on the Behavior of Turbocharger Lubricated Thrust Bearings
  91. Altmetric Badge
    Chapter 90 Dynamics Analysis of Flexible Rotor Supported by Floating Ring Bearings
  92. Altmetric Badge
    Chapter 91 Control of Rotor Motion Using Active Fluid-Film Bearings
  93. Altmetric Badge
    Chapter 92 Thermal Effects in Hydrodynamic Cylindrical Bearings
  94. Altmetric Badge
    Chapter 93 Temperature Influence on the Behavior of a Magnetorheological Fluid Journal Bearing
  95. Altmetric Badge
    Chapter 94 Test Rig Characterization and Dynamic Testing of a Smart Electro-Magnetic Actuator Journal Integrated Bearing
  96. Altmetric Badge
    Chapter 95 Effects of Rough Bearing Surface on the Stochastic Dynamics of a Rotor-Bearing System Subject to Random Fluid-Induced Forces
  97. Altmetric Badge
    Chapter 96 On the Dynamics of a Rigid Rotor with Static Unbalance Symmetrically Mounted in Compliant Air Bearings
  98. Altmetric Badge
    Chapter 97 Thermal Studies on Foil Bearings with a Sliding Coating Made of Plastic Material
  99. Altmetric Badge
    Chapter 98 Parametric Study of Dynamic Analysis Focusing on the Foil Structure of a Gas Foil Journal Bearing
  100. Altmetric Badge
    Chapter 99 Static and Dynamic Analyses of a Rotor with Aerostatic Ceramic Porous Journal
  101. Altmetric Badge
    Chapter 100 Fluid Flow and Thermal Features of Gas Foil Thrust Bearings at Moderate Operating Temperatures
  102. Altmetric Badge
    Chapter 101 The Dynamics of the Laboratory Rotor Founded on the Gas Foil Bearings—Numerical Analysis
  103. Altmetric Badge
    Chapter 102 Numerical and Experimental Investigation of Rotor-Simulator in Foil Gasdynamic Bearings for Compact Gas Turbine
  104. Altmetric Badge
    Chapter 103 Non-linear Stability Analysis of a Modified Gas Foil Bearing Structure
  105. Altmetric Badge
    Chapter 104 Prediction of Stiffness Coefficients for Foil Air Bearings to Perform Rotordynamic Analysis of Turbomachinery
  106. Altmetric Badge
    Chapter 105 Externally Pressurized Gas Journal Bearings with Asymmetric Gas Supply (Verification of Availability of Gas Pressure Control Using a Small Size Test Rig)
  107. Altmetric Badge
    Chapter 106 Dynamic Modelling of Gear System with Gyroscopic Effect and Crack Detection Analysis
  108. Altmetric Badge
    Chapter 107 Study on Nonlinear Meshing Stiffness of Spline
  109. Altmetric Badge
    Chapter 108 Research on Dynamic Modeling and Analysis of the Coupled Planetary Gear and Rotor System
  110. Altmetric Badge
    Chapter 109 Effect of Gear Tooth Breakage on the Dynamic Response in a Wind Turbine Drive Train Subjected to Stochastic Load Excitation
  111. Altmetric Badge
    Chapter 110 On the Diagnostics of Planet Gear Bearings
  112. Altmetric Badge
    Chapter 111 Dynamic Characterization of Wind Turbine Gearboxes in Operational Conditions
  113. Altmetric Badge
    Chapter 112 The Torsional Stiffness of Involute Spur Planetary Gears
  114. Altmetric Badge
    Chapter 113 Planet Eccentricity Error on a Planetary Gear Transmission: Influence on Load Sharing
  115. Altmetric Badge
    Chapter 114 Rotordynamic Analysis for Integrally Geared Air Compressor Using Measured Dynamic Coefficients of Tilting Pad Journal Bearings
  116. Altmetric Badge
    Chapter 115 Rotor Active Vibration Control via Internal Magnetic Bearings and a Concentric Inner Shaft Coupling
  117. Altmetric Badge
    Chapter 116 Vibration Control of Rotor Shaft Systems Using Electromagnetic Actuator
  118. Altmetric Badge
    Chapter 117 Experimental Estimation of Speed-Dependent Active Magnetic Bearing Rotordynamic Parameters
  119. Altmetric Badge
    Chapter 118 Stability Study for Vibration Control of an Active Magnetic Bearing Supported Rotor Mounted on a Moving Base
  120. Altmetric Badge
    Chapter 119 Eigenvalue Assignment for Stabilizing Unstable Conical Modes of Rigid Rotor-Active Magnetic Bearing System Over High Rotational Speed Range
  121. Altmetric Badge
    Chapter 120 Rotordynamic Behavior and Performance of Controllable Hybrid Foil-Magnetic Bearing
  122. Altmetric Badge
    Chapter 121 Passive Magnetic Bearings at the Rotary Application
  123. Altmetric Badge
    Chapter 122 Dynamic Analysis of the High-Speed Flexible Rotors Supported on the Electrodynamic Passive Magnetic Bearings
  124. Altmetric Badge
    Chapter 123 Experimental Assessment of Touchdown Bearing Contact Forces in Magnetic Bearing Systems
  125. Altmetric Badge
    Chapter 124 A Contact Event Model for an AMB-supported Rotor
  126. Altmetric Badge
    Chapter 125 Internal Sensing and Actuation Strategies for Smart Machine Rotors
  127. Altmetric Badge
    Chapter 126 Assessment of Numerical Model to Determination of Parameters to Stability Experimental Tests
  128. Altmetric Badge
    Chapter 127 Experimental Observations of Rotor Orbit Analysis in Rotating Machines
  129. Altmetric Badge
    Chapter 128 Experimental Study on the Dynamic Characteristics of Spline Joint in Rotor System
  130. Altmetric Badge
    Chapter 129 Capturing the Dynamics of Rotating Machines: A Modern Global Approach Based on SAMCEF Rotor
  131. Altmetric Badge
    Chapter 130 An Innovative Rotordynamical Model for Coupled Flexural-Torsional Vibrations in Rotating Machines
  132. Altmetric Badge
    Chapter 131 Vibration Control in Electrical Machines Using Built-in Actuator
  133. Altmetric Badge
    Chapter 132 Inclusion of Unsteady Bow in a Model-Based Monitoring System for Rotors
  134. Altmetric Badge
    Chapter 133 Development and Validation of Efficient Rotordynamical Models for Complex Rotating Systems
  135. Altmetric Badge
    Chapter 134 Non-linear Analysis of the Defects of a Vertical Turbine
  136. Altmetric Badge
    Chapter 135 A Method for Assessing the Turbine Generator Set Shaft-Line Behavior in Accidental Situations
  137. Altmetric Badge
    Chapter 136 Effect of Unbalanced Rotor on the Dynamics of Cylindrical Roller Bearings
  138. Altmetric Badge
    Chapter 137 Vibration Analysis of Fiber Reinforced Composite Discs
  139. Altmetric Badge
    Chapter 138 Numerical Studies of a Nonlinear Flexible Rotating System Under Harmonic Ground Motion
  140. Altmetric Badge
    Chapter 139 Analysis of Rotating Systems Using General-Purpose Multibody Dynamics
  141. Altmetric Badge
    Chapter 140 Proceedings of the 9th IFToMM International Conference on Rotor Dynamics
  142. Altmetric Badge
    Chapter 141 Application of Optimization Methods in Rotor Dynamics
  143. Altmetric Badge
    Chapter 142 Active Vibration Isolation of a Flexible Rotor Being Subject to Unbalance Excitation and Gyroscopic Effect Using $${\boldsymbol{\mathcal{H}}}_{\boldsymbol{\infty}}$$ H ∞ -Optimal Control
  144. Altmetric Badge
    Chapter 143 EHD Modeling of Angular Contact Ball Element Bearings
  145. Altmetric Badge
    Chapter 144 Controllers for Attenuation of Lateral Rotor Vibration Part I: Controller Design
  146. Altmetric Badge
    Chapter 145 Controllers for Attenuation of Lateral Rotor Vibration Part II: Controller Optimization and Comparison
  147. Altmetric Badge
    Chapter 146 Controlled Modal Energy Transfer in Torsional Systems Using Impulsive Parametric Excitation
  148. Altmetric Badge
    Chapter 147 Controlling Non-linear Axial Vibrations of a Turbine Rotor
  149. Altmetric Badge
    Chapter 148 Prediction of Rotor Dynamic Behavior of Synchronous Generators
  150. Altmetric Badge
    Chapter 149 Towards Determination of Critical Speeds of a Rotating Shaft with Eccentric Sleeves: Equations of Motion
  151. Altmetric Badge
    Chapter 150 Studying Continuum Dynamic Behaviour Through Rigid Multibody Dynamics
  152. Altmetric Badge
    Chapter 151 Nonlinear Dynamic Analysis of Ball Bearings Due to Varying Number of Balls and Centrifugal Force
  153. Altmetric Badge
    Chapter 152 Sensitivity Analysis on the Dynamic Characteristics of a 1000 MW Turbo-Generator Rotor
  154. Altmetric Badge
    Chapter 153 Prediction Capabilities of Coriolis and Gyroscopic Effects in Current Finite Element Software
  155. Altmetric Badge
    Chapter 154 A Parameter Preserving Model Order Reduction Algorithm for Rotordynamic Systems
  156. Altmetric Badge
    Chapter 155 Finite Element Modeling and Vibration Analysis of a Free Power Turbine Subjected to Non-synchronous Excitation
  157. Altmetric Badge
    Chapter 156 Rotor-Dynamic Computer Simulations of Rolling Bearing in High-Speed Rotating Machinery
  158. Altmetric Badge
    Chapter 157 Spherical Roller Bearing Simulation Model with Localized Defects
  159. Altmetric Badge
    Chapter 158 Three Case Studies from the UKCS Gas Compressors: Combining Rotor Dynamic and Process Data as an Aid to Diagnosis
  160. Altmetric Badge
    Chapter 159 Correlation Between Friction Coefficient and Sound Characteristics for Cage Instability of Cryogenic Deep Groove Ball Bearings
  161. Altmetric Badge
    Chapter 160 Experimental Analysis of Rotor-Stator Contact with Many Degrees of Freedom
  162. Altmetric Badge
    Chapter 161 Rotor-Stator Partial Rub Diagnosis Using Hilbert Huang Transform
  163. Altmetric Badge
    Chapter 162 Detecting Rub-Impact Fault of Rotor System Based on Variational Mode Decomposition
  164. Altmetric Badge
    Chapter 163 Effect of Rotor-Stator Contact on the Mass Unbalance Response
  165. Altmetric Badge
    Chapter 164 Dynamic Response of a High Speed Flexible Rotor Due to Sudden Large Unbalance
  166. Altmetric Badge
    Chapter 165 Investigations on Non-steady Behaviour of Rotors Due to Light Rubbing to Brush Seals
  167. Altmetric Badge
    Chapter 166 Non-linear Analysis of Floating Ring Annular Seals: Stability and Impacts
  168. Altmetric Badge
    Chapter 167 Effects of Clearance on Leakage Flow Characteristics of Labyrinth Brush Seal
  169. Altmetric Badge
    Chapter 168 Dynamic Analysis of a Non-contacting Finger Seal
  170. Altmetric Badge
    Chapter 169 On the Stabilizing Effect of Support Asymmetry in Rotordynamics
  171. Altmetric Badge
    Chapter 170 Periodic Stability and Sensitivity Analysis of Rotating Machinery
  172. Altmetric Badge
    Chapter 171 Numerical Analysis on the Nonlinear Hysteresis Phenomenon Associated with Instability of a Steam Turbine Rotor-Bearing System
  173. Altmetric Badge
    Chapter 172 Stability Analysis and Assessment of Rotor Trains Using Operational Modal Analysis
  174. Altmetric Badge
    Chapter 173 Stability Analysis Based on Energy Balance of Motion of the Gyroscopic Exercise Tool
  175. Altmetric Badge
    Chapter 174 Development and Validation of a Model to Describe the Bearings Interaction in Rotating Machines Due to Elastic Supporting Structures
  176. Altmetric Badge
    Chapter 175 Influence of the Supporting Structure Dynamic Behaviour on the Shaft Vibration of a Real Rotating Machine
  177. Altmetric Badge
    Chapter 176 Development and Preliminary Validation of a New Strategy to Model the Interaction Between Rotating Machines and Elastic Supporting Structure
  178. Altmetric Badge
    Chapter 177 Evaluation of Pedestal Stiffness Variations in Steel Supported Structures for Steam Turbines
  179. Altmetric Badge
    Chapter 178 Modeling and Experimental Characterization of Resilient Supports for Turbomolecular Pumps
  180. Altmetric Badge
    Chapter 179 Experimental Evaluation of a Modal Parameter Based Foundation Identification Procedure
  181. Altmetric Badge
    Chapter 180 Modeling of Visco-elastic Supports for Hydropower Applications
  182. Altmetric Badge
    Chapter 181 Theoretical Modeling for a Rotor-Bearing-Foundation System and Its Dynamic Characteristics Analysis
  183. Altmetric Badge
    Chapter 182 Non-linear Behavior and Loading Capability of the Spring Support in Lateral Response
  184. Altmetric Badge
    Chapter 183 Thermal Unbalance Behaviour of Turbogenerator Rotors
  185. Altmetric Badge
    Chapter 184 New Mathematical Model for the Morton Effect Based on the THD Analysis
  186. Altmetric Badge
    Chapter 185 Similarity Analysis of Spiral Vibration Behavior on Large Turbomachinery Shaft Lines
  187. Altmetric Badge
    Chapter 186 A New Approach for Thermo-Elastic Equations to Predict Spiral Vibrations in Turbogenerator Shafts
  188. Altmetric Badge
    Chapter 187 Thermoelastic Steam Turbine Rotor Control Based on Neural Network
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

news
1 news outlet
twitter
1 X user
patent
1 patent

Citations

dimensions_citation
16 Dimensions

Readers on

mendeley
143 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Towards determination of critical speeds of a rotating shaft with eccentric sleeves: equations of motion
Published by
Springer International Publishing, January 2015
DOI 10.1007/978-3-319-06590-8
ISBNs
978-3-31-906589-2, 978-3-31-906590-8
Authors

Kirk, A., Georgiadis, F., Bingham, C.

Editors

Pennacchi, Paolo

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 143 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
United Kingdom 1 <1%
Russia 1 <1%
Italy 1 <1%
Canada 1 <1%
Unknown 139 97%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 34 24%
Student > Master 29 20%
Researcher 18 13%
Student > Doctoral Student 11 8%
Student > Bachelor 6 4%
Other 15 10%
Unknown 30 21%
Readers by discipline Count As %
Engineering 92 64%
Energy 4 3%
Computer Science 4 3%
Social Sciences 2 1%
Materials Science 2 1%
Other 5 3%
Unknown 34 24%