↓ Skip to main content

Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)

Overview of attention for book
Cover of 'Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Performance Analysis of Semi-active Suspension System Based on Suspension Working Space and Dynamic Tire Deflection
  3. Altmetric Badge
    Chapter 2 Study on Wear Behavior of Al-Based Hybrid Metal Matrix Composites Reinforced with Al2O3/SiC Particles
  4. Altmetric Badge
    Chapter 3 Development of Simulation Model for Effective Testing and Verification of Servo Vacuum Booster
  5. Altmetric Badge
    Chapter 4 Investigation of Relation Between Ignition Timing and Advance Angle to Improve Engine Performance
  6. Altmetric Badge
    Chapter 5 Experimental Investigation of Vapour Absorption Refrigeration Cycle for Automobile Cabin Cooling
  7. Altmetric Badge
    Chapter 6 Effects of Nano- and Micro-Filler on Water Diffusion and Leakage Current of GRP Composites
  8. Altmetric Badge
    Chapter 7 Effect of Interleaving and Low Velocity Impact on the Dielectric Properties of Composite Laminates
  9. Altmetric Badge
    Chapter 8 Numerical Modeling and Study of Vaporization of Single Droplet and Mono-dispersed Spray Under Mixed Convection Conditions
  10. Altmetric Badge
    Chapter 9 Incremental Sheet Forming: An Experimental Study on the Geometric Accuracy of Formed Parts
  11. Altmetric Badge
    Chapter 10 Experimental Analysis of Implementing Roughness on NACA 0018 Airfoil
  12. Altmetric Badge
    Chapter 11 Numerical Investigation of Siting the Wind Turbine on Vel Tech University Campus
  13. Altmetric Badge
    Chapter 12 An Improved Unsteady CFD Analysis of Pitching Airfoil Using OpenFOAM
  14. Altmetric Badge
    Chapter 13 Development of 12 Channel Temperature Acquisition System for Heat Exchanger Using MAX6675 and Arduino Interface
  15. Altmetric Badge
    Chapter 14 Optimization of Clutch Cover Mounting Base Plate Through Twin Threaded Grub Screw
  16. Altmetric Badge
    Chapter 15 Active Vortex Shedding Control for Flow Over a Circular Cylinder Using Rearward Jet Injection at Low Reynolds Number
  17. Altmetric Badge
    Chapter 16 Performance Augmentation of Boron–HTPB-Based Solid Fuels by Energetic Additives for Hybrid Gas Generator in Ducted Rocket Applications
  18. Altmetric Badge
    Chapter 17 Experimental Investigation of Wear and Hardness Test Over AA2219 with Reinforcement of Tungsten Carbide
  19. Altmetric Badge
    Chapter 19 Numerical Investigation of Cu–H2O Nanofluid in a Differentially Heated Square Cavity with Conducting Square Cylinder Placed at Arbitrary Locations
  20. Altmetric Badge
    Chapter 20 Numerical Investigation of Single Ramp Scramjet Inlet Characteristics at Mach Number 5.96 Due to Shock Wave–Boundary Layer Interaction
  21. Altmetric Badge
    Chapter 21 Numerical Analysis of Discrete Element Camber Morphing Airfoil in the Reynolds Number of Conventional Flyers
  22. Altmetric Badge
    Chapter 22 Comparison of Quarter Car Suspension Model Using Two Different Controllers
  23. Altmetric Badge
    Chapter 23 Hot Forging Characteristics of Powder Metallurgy Duplex Stainless Steels Developed from 304L and 430L Pre-alloyed Powders
  24. Altmetric Badge
    Chapter 24 Machinability Studies of TiAlN-/AlCrN-Coated and Uncoated Tungsten Carbide Tools on Turning EN25 Alloy Steel
  25. Altmetric Badge
    Chapter 25 Study on Temperature Indicating Paint for Surface Temperature Measurement—A Review
  26. Altmetric Badge
    Chapter 26 Inflight Parameter Estimation Framework for Fixed-Wing UAV
  27. Altmetric Badge
    Chapter 27 Experimental Studies on Surface Roughness of H12 Tool Steel in EDM Using Different Tool Materials
  28. Altmetric Badge
    Chapter 28 Effect of Equivalence Ratio on Parameters of Coal-Fired Updraft Gasifier
  29. Altmetric Badge
    Chapter 29 Numerical Analysis of Two-Phase Blood Flow in Idealized Artery with Blockage
  30. Altmetric Badge
    Chapter 30 Generalized Design of Experiments for Structural Optimization
  31. Altmetric Badge
    Chapter 31 Numerical Prediction of Performance of a Double-Acting α-Type Stirling Engine
  32. Altmetric Badge
    Chapter 32 Design Optimization, Automation and Testing Analysis of Dust Cleaning Mechanism for Solar Photovoltaic Power Plant
  33. Altmetric Badge
    Chapter 34 Experimental Investigations for Improving the Strength of Parts Manufactured Using FDM Process
  34. Altmetric Badge
    Chapter 35 Effects of Wall Thinning Behaviour During Pipe Bending Process—An Experimental Study
  35. Altmetric Badge
    Chapter 36 Computational Simulation of Wind Flow Behavior Around a Building Structure
  36. Altmetric Badge
    Chapter 37 Numerical Analysis of Bubble Hydrodynamics in a Steam Reactor Chemical Looping Reforming System
  37. Altmetric Badge
    Chapter 38 Numerical Study of Flow Field Investigation of Air Jet Impingement on Different Solid Block Size
  38. Altmetric Badge
    Chapter 39 Stress Intensity Factors for a Plate with Slant Edge Crack Built with Rapid Manufacturing Process
  39. Altmetric Badge
    Chapter 40 Design, Analyze, and Develop a Hybrid Silencer for 250 kVA DG Set
  40. Altmetric Badge
    Chapter 41 Design, Analysis, and Simulation of a Power-Split Device for Hybrid Two-Wheeler
  41. Altmetric Badge
    Chapter 42 Development of Inhibition System for SIS Process
  42. Altmetric Badge
    Chapter 43 Finite Element Analysis of Lifting Lugs Under Actual Factory Conditions
  43. Altmetric Badge
    Chapter 44 Numerical Simulation of High Velocity Impact on Composite Targets Using Advanced Computational Techniques
  44. Altmetric Badge
    Chapter 45 Study of Future Refrigerant for Vapor Compression Refrigeration Systems
  45. Altmetric Badge
    Chapter 46 Numerical Simulation of Viscous Flow Past Elliptic Cylinder
  46. Altmetric Badge
    Chapter 47 Processing and Evaluation of Mechanical Properties of Sisal and Bamboo Chemically Treated Hybrid Composite
  47. Altmetric Badge
    Chapter 48 On the Surface Finish Improvement in Hybrid Additive Subtractive Manufacturing Process
  48. Altmetric Badge
    Chapter 49 Impact of Control Unit Gains on Noise Mitigation in Swash Plate Pump Pumping Systems
  49. Altmetric Badge
    Chapter 50 Discussion of Past, Present and Future Perspectives of Refrigerants and Its Future Scope
  50. Altmetric Badge
    Chapter 51 Analysis of Dynamic Probing Errors in Measuring Machines
  51. Altmetric Badge
    Chapter 52 Thrust Prediction Model for Varying Chamber Pressure for a Hypergolic Bipropellant Liquid Rocket Engine
  52. Altmetric Badge
    Chapter 53 Experimental Studies on Different Proportions of CB-Filled Natural Rubber Composites with Precipitated Silica and Silica Gel
  53. Altmetric Badge
    Chapter 54 Fuzzy Logic Simulation for Automatic Speed Control System
  54. Altmetric Badge
    Chapter 56 Adaptive Fault Tolerance Flight Controller for Aircraft Actuator Failure
Overall attention for this book and its chapters
Altmetric Badge

Citations

dimensions_citation
4 Dimensions

Readers on

mendeley
90 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)
Published by
Springer Singapore, January 2019
DOI 10.1007/978-981-13-2697-4
ISBNs
978-9-81-132696-7, 978-9-81-132697-4
Editors

U. Chandrasekhar, Lung-Jieh Yang, S. Gowthaman

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 90 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 90 100%

Demographic breakdown

Readers by professional status Count As %
Lecturer 1 1%
Other 1 1%
Unknown 88 98%
Readers by discipline Count As %
Engineering 2 2%
Unknown 88 98%