↓ Skip to main content

Shape Casting

Overview of attention for book
Cover of 'Shape Casting'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Update on Bifilms— The Fundamental Defect in Metals
  3. Altmetric Badge
    Chapter 2 Entrainment Defects in Cast Iron
  4. Altmetric Badge
    Chapter 3 Measurement of Air Entrainment During Pouring of an Aluminum Alloy
  5. Altmetric Badge
    Chapter 4 Connecting Oxide Bifilms’ Properties from Atomistic Simulations with Virtual Casting of Aluminum
  6. Altmetric Badge
    Chapter 5 Numerical Process Modelling and Simulation of Campbell Running Systems Designs
  7. Altmetric Badge
    Chapter 6 Synchrotron X-Ray Real-Time Studies of the Nucleation and Growth of Intermetallic Phases in Solidification
  8. Altmetric Badge
    Chapter 7 Determination of Liquid Metal Quality with Deep Etching Method
  9. Altmetric Badge
    Chapter 8 Effect of Fe-Rich Intermetallics on Tensile Behavior of Al–Cu 206 Cast Alloys at Solid and Near-Solid States
  10. Altmetric Badge
    Chapter 9 Determining Casting Defects in Thixomolding Mg Casting Part by Computed Tomography
  11. Altmetric Badge
    Chapter 10 The Effect of the Addition of Transition Metals on Double Oxide Film Defects in an Al–Si–Mg Alloy
  12. Altmetric Badge
    Chapter 11 On Estimating Largest Defects in Castings
  13. Altmetric Badge
    Chapter 12 Ti Grain Refinement Myth and Cleanliness of A356 Melt
  14. Altmetric Badge
    Chapter 13 On the Effects of Defects and Imperfections on Tensile Toughness of a Secondary Aluminium Alloy
  15. Altmetric Badge
    Chapter 14 The Myth of Hydrogen Pores in Aluminum Castings
  16. Altmetric Badge
    Chapter 15 Casting Defect Analysis on Fracture Surface of 356 Aluminium Alloy
  17. Altmetric Badge
    Chapter 16 Investigation of Casting Quality Change of A356 by Duration in Liquid State
  18. Altmetric Badge
    Chapter 17 Characterization of the Effect of Sr and Ti on Liquid Quality in Al8Si3Cu
  19. Altmetric Badge
    Chapter 18 The Nemak Cosworth Casting Process Latest Generation
  20. Altmetric Badge
    Chapter 19 Campbellology for Runner System Design
  21. Altmetric Badge
    Chapter 20 A Solidification Model with Application to AlSi-Based Alloys
  22. Altmetric Badge
    Chapter 21 Physical Modeling of Transport Phenomena in Asymmetrical Multi-strand Tundish with Retaining Wall
  23. Altmetric Badge
    Chapter 22 The Validation of Feeder Modeling for Ductile Iron Castings
  24. Altmetric Badge
    Chapter 24 Simulation Analysis Techniques for Investment Casting Process of Ni-Base Superalloy Components
  25. Altmetric Badge
    Chapter 25 Improvement in Metallurgical Properties of Gravity Die Cast 2024-T6 Aluminum Alloy via Cryogenic Process
  26. Altmetric Badge
    Chapter 26 Melt Cleaning Efficiency of Various Fluxes for A356 Alloy
  27. Altmetric Badge
    Chapter 27 Characterisation of Lead Sheet Manufactured Using Traditional Sand-Casting Technique
  28. Altmetric Badge
    Chapter 28 On the Intrinsic and Extrinsic Microstructure-Property Effects in Cast Aluminum Alloys
  29. Altmetric Badge
    Chapter 29 Measurement of Residual Strain in the Cylinder Bridge of High-Pressure Die Cast A383 Engine Blocks Using Neutron Diffraction
  30. Altmetric Badge
    Chapter 30 Relation Between Microstructure and Tensile Properties of V and B Added Al-7Si Alloy
  31. Altmetric Badge
    Chapter 31 The Effect of Friction Stir Processing on Bifilms and Structural Quality in A356 Alloy Castings
  32. Altmetric Badge
    Chapter 32 Effect of Copper and Nickel Addition on Mechanical Properties of A356 Alloy and Assessment of Mechanism of Pore Formation
  33. Altmetric Badge
    Chapter 33 Aluminum Alloy with High Mg Content: Casting Studies for Microstructural Evolution, Phase Formation and Thermophysical Properties with Different Alloying Elements
  34. Altmetric Badge
    Chapter 34 Correlation Between Melt Quality and Machinability of Al9Si3Cu HPDC Alloy
  35. Altmetric Badge
    Chapter 35 Change in Sr Modification by Duration and Its Effect on Mechanical Properties of A360 and A413 Alloy
  36. Altmetric Badge
    Chapter 36 Aluminum Matrix Graphene-Reinforced Composite Materials
  37. Altmetric Badge
    Chapter 37 Influence of Melt Quality on the Fluidity of AlSi12Fe
Overall attention for this book and its chapters
Altmetric Badge

Citations

dimensions_citation
1 Dimensions
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Shape Casting
Published by
Springer International Publishing, March 2019
DOI 10.1007/978-3-030-06034-3
ISBNs
978-3-03-006033-6, 978-3-03-006034-3
Editors

Tiryakioğlu, Murat, Griffiths, William, Jolly, Mark