↓ Skip to main content

International Conference on Emerging Trends in Engineering (ICETE)

Overview of attention for book
Cover of 'International Conference on Emerging Trends in Engineering (ICETE)'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 An Empirical Based Porous Flow Approach to Modelling Heterogeneous Traffic
  3. Altmetric Badge
    Chapter 2 Effect of Different Aggregates on Alkali Silica Reaction of Geopolymer Concrete
  4. Altmetric Badge
    Chapter 3 Assessment of Aquifer Vulnerability of Nizamabad District, Telangana State, India Using GIS and Drastic Method
  5. Altmetric Badge
    Chapter 4 Effect of Baffle Wall Parameters on the Modal Responses of Elevated Rectangular Water Tank
  6. Altmetric Badge
    Chapter 5 Bearing Capacity of Strip Footing on Reinforced Foundation Beds with Inclined Reinforcement
  7. Altmetric Badge
    Chapter 7 Precise Survey Assistance for Civil Structures Using Survey Assist
  8. Altmetric Badge
    Chapter 8 Ground Improvement Using Band Drains at Onshore Gas Terminal Near Kakinada (AP), India
  9. Altmetric Badge
    Chapter 9 New Light Weight Mortar for Structural Application: Assessment of Porosity, Strength and Morphology Properties
  10. Altmetric Badge
    Chapter 10 Computing Redistribution Moments of Concrete Members in the Plastic Stage Using Linear Analysis: Short Review
  11. Altmetric Badge
    Chapter 11 Nonlinear Dynamic Analysis
  12. Altmetric Badge
    Chapter 12 Evaluation of Coir Geotextile Mats to Enhance the Poor Subgrade Under Repeated Load for Low-Volume Roads
  13. Altmetric Badge
    Chapter 13 Estimation of Maximum Magnitude (m max ) Considering Different Seismic Zones
  14. Altmetric Badge
    Chapter 14 Necessity of New Look for Equitable Water Sharing Among Basin States - Krishna Basin
  15. Altmetric Badge
    Chapter 15 A Comparative Study on the Performance of ANN, MLR and MNR in the Assessment of Slope Stability for Kalla - Coonoor Hill Road Stretch of Nilgiris
  16. Altmetric Badge
    Chapter 16 Hydrologic Modeling with Transfer Function Based Approach: A Comparative Study over Godavari River Basin
  17. Altmetric Badge
    Chapter 17 Study on Interaction of Reinforcing Strips Embedded in Cement Modified Marginal Backfill
  18. Altmetric Badge
    Chapter 18 Experimental Study on Interfacial Frictional Properties of Geogrid Reinforced Pond Ash
  19. Altmetric Badge
    Chapter 19 Resilient Modulus of Unsaturated Soil – A Comprehensive Review
  20. Altmetric Badge
    Chapter 20 Effect of Eccentric Load on Footing Resting on Planar Geosynthetic Reinforcement
  21. Altmetric Badge
    Chapter 21 Strength Investigation of Fly Ash Based Concrete Waste Steel Fibre and Polypropylene Fibre as Reinforcing Materials
  22. Altmetric Badge
    Chapter 22 Application of Statistics to the Analysis of Corrosion Data for Rebar in Metakaolin Concrete
  23. Altmetric Badge
    Chapter 23 Earthquake Analysis of High-Rise Building with Floating Column
  24. Altmetric Badge
    Chapter 24 A Review on the Recent Development of Ambient Cured Geopolymer Composites
  25. Altmetric Badge
    Chapter 25 A Case Study on Structural Assessment of Dudhgaon Grampanchayat Building by Using Non Destructive Testing
  26. Altmetric Badge
    Chapter 26 Analysis and Design of High-Rise Building Using Diagrid Structural System
  27. Altmetric Badge
    Chapter 27 Engineered Cementitious Composites
  28. Altmetric Badge
    Chapter 28 Influence of Metakaolin on Stone Waste Aggregate Concrete
  29. Altmetric Badge
    Chapter 29 Rapid Hardening on the Strength Gain Admixture on Behavior of Concrete with Replacement of Binary Cementitious Materials
  30. Altmetric Badge
    Chapter 30 Evaluation of Pullout Resistance of Reinforcing Strips Embedded in Cement Modified Marginal Backfill of Mechanically Stabilized Earth (MSE) Walls
  31. Altmetric Badge
    Chapter 31 Identification of Artificial Recharge Zones Using GIS
  32. Altmetric Badge
    Chapter 32 Seismic Analysis and Design of Mass and Stiffness Irregular R.C. Building Frames with Different Code
  33. Altmetric Badge
    Chapter 33 Assessment of Spatial Interpolation Techniques on Groundwater Contamination
  34. Altmetric Badge
    Chapter 34 Sustainability Concepts in the Design of Tall Structures
  35. Altmetric Badge
    Chapter 35 Spontaneous Combustion of Coal and Correlation with Its Intrinsic Properties Using Adiabatic Oxidation Method
  36. Altmetric Badge
    Chapter 36 Extraction of Electricity from Blast Induced Ground Vibration Waves – Case Study
  37. Altmetric Badge
    Chapter 37 Evolution of the Probability Distribution Function of Shovel – Dumper Combination in Opencast Coal Mine Using ANN and RWB
  38. Altmetric Badge
    Chapter 38 Temperature Measurement During Rotary Drilling of Rocks - A Statistical Approach
  39. Altmetric Badge
    Chapter 39 Safety in Coal Mines in India-Its Perspective
  40. Altmetric Badge
    Chapter 40 Reliability Analysis of LHD Machine - A Case Study
  41. Altmetric Badge
    Chapter 41 Emerging Mining Trends: Preparing Future Mining Professionals
  42. Altmetric Badge
    Chapter 42 Prediction of Energy Efficiency of Main Transportation System Used in Underground Coal Mines – A Statistical Approach
  43. Altmetric Badge
    Chapter 43 Shortcomings of Vibrating Screen and Corrective Measures: A Review
  44. Altmetric Badge
    Chapter 44 Quantification of Rock Strength Using the Mechanical Drilling Parameters
  45. Altmetric Badge
    Chapter 45 Evaluation of Whole Body Vibration of Heavy Earth Moving Machinery Operators
  46. Altmetric Badge
    Chapter 46 Assessment and Prediction of Specific Energy Using Rock Brittleness in Rock Cutting
  47. Altmetric Badge
    Chapter 47 Numerical Investigation on Factors Affecting the Performance of Roof Bolts for Continuous Miner Working
  48. Altmetric Badge
    Chapter 48 Modelling of Biogas Fueled HCCI Engine for Various Inlet Conditions
  49. Altmetric Badge
    Chapter 49 Studies on Pitting Corrosion of Pulsed Electrodeposited Nanocomposite Coating
  50. Altmetric Badge
    Chapter 50 Effect of Condenser Coil Profile and Subcooling on Performance of Vapour Compression Refrigeration System
  51. Altmetric Badge
    Chapter 51 Criteria for Drop-in Replacement of Existing Refrigerant with an Alternative Refrigerant
  52. Altmetric Badge
    Chapter 52 Analysis of Characteristics of Launcher Missile System and Its Optimization to Reduce Tip-Off Effect During Launch
  53. Altmetric Badge
    Chapter 53 Performance Analysis of a Horizontal Axis Wind Lens Wind Turbine
  54. Altmetric Badge
    Chapter 54 Experimental Investigation and Optimization of Electrochemical Micro Machining Process Parameters for Al 7075 T6 Alloy
  55. Altmetric Badge
    Chapter 55 Galactic Cosmic Energy - A Novel Mode of Energy Harvesting
  56. Altmetric Badge
    Chapter 56 Infrared Heating - A New Green Technology for Process Intensification in Drying of Purslane Leaves to Reduce the Thermal Losses
  57. Altmetric Badge
    Chapter 57 Grey Relational Analysis of EDM Process Parameters for Incoloy-800
  58. Altmetric Badge
    Chapter 58 Computation of Kinematic Redundancy and Its Workspace in RRRR Planar Kinematic Chain
  59. Altmetric Badge
    Chapter 59 Physio-Mechanical Properties and Thermal Analysis of Furcreo Foetedo Mediopicta (ffm) Fibers: Its Potential Application as Reinforcement in Making of Composites
  60. Altmetric Badge
    Chapter 60 Computational Analysis of Cavitation Structures on a Ship Propeller
  61. Altmetric Badge
    Chapter 61 Heat Transfer in Food Crop Dryer Using Halogen Lamp
  62. Altmetric Badge
    Chapter 62 Progressive Damage Analysis of Laminated Composites
  63. Altmetric Badge
    Chapter 63 Optimization of Pecking Order Layout with Job Shop Scheduling as Constraint: An Approach of Metaheuristics
  64. Altmetric Badge
    Chapter 64 Experimental and Simulation Study in Deep Drawing of Circular Cups for Determination of LDR
  65. Altmetric Badge
    Chapter 65 Free Vibration Analysis of Pre-stressed Membrane Using Element Free Galerkin Method
  66. Altmetric Badge
    Chapter 66 Xylitol Based Phase Change Material with Graphene Nano Platelets as Fillers for Thermal Energy Management
  67. Altmetric Badge
    Chapter 67 Orbital Volume Analysis of Midfacial Fractures Using Additive Manufacturing Technologies
  68. Altmetric Badge
    Chapter 68 Parametric Optimization During Wire EDM Taper Cutting on AISI D2 Steel Using Desirability Function
  69. Altmetric Badge
    Chapter 69 Extraction of Coordinate Points for the Numerical Simulation of Single Point Incremental Forming Using Microsoft Excel
  70. Altmetric Badge
    Chapter 70 A Review on Wire Arc Additive Manufacturing (WAAM) Fabricated Components of Ti6AL4V and Steels
  71. Altmetric Badge
    Chapter 71 Towards Modeling of Polymer Injection Molding Process – Approaches for Evaluation of the Processing Conditions, Control Factors and Optimization
  72. Altmetric Badge
    Chapter 72 Design of Sequential Electro-Pneumatic System
  73. Altmetric Badge
    Chapter 73 Factors Influencing Hydrodynamic Entry Length in Helical Coils
  74. Altmetric Badge
    Chapter 74 Formability Analysis on the Gas Formed Aluminum Coated Magnesium Alloys in Conical Dies
  75. Altmetric Badge
    Chapter 75 Investigation of Back Rake Angle on Machining of Al 6061 and Development of Regression Model for Resultant Force
  76. Altmetric Badge
    Chapter 76 Machining Characteristics of Electro Discharge Machining on NIMONIC 80A by Response Surface Methodology
  77. Altmetric Badge
    Chapter 77 Laser Machining of Polymer Materials – Experimental Investigations - Process Challenges and Strategies
  78. Altmetric Badge
    Chapter 78 Assessment of Dimensional Accuracy of Reproducibility of Cadaver Skull by FDM Additive Manufacturing
  79. Altmetric Badge
    Chapter 79 Evaluation of Microstructural and Mechanical Properties of Friction Welded AISI 4140 Grade Steel Pipes
  80. Altmetric Badge
    Chapter 80 Effect of Aluminum Powder Suspended Dielectric and Silver Coated Copper Electrode on Electrical Discharge Machining Characteristics of Inconel 718
  81. Altmetric Badge
    Chapter 81 Investigation of the Process Parameters on Hot Rolling of Al 7178-SiC Metal Matrix
  82. Altmetric Badge
    Chapter 82 Sensitivity Study of the Parameters Affecting Pressure Recovery in a Two Stage Jet Pipe Electro Hydraulic Servo Valve
  83. Altmetric Badge
    Chapter 83 Computational Modeling and Analysis of Intake Taper Manifold of an Internal Combustion Engine
  84. Altmetric Badge
    Chapter 84 Evaluation of Wear Rate of Different Liner Materials Used in Bunkers and Silos Using Dry Abrasion Wear Test
  85. Altmetric Badge
    Chapter 85 Experimental Investigation on Maraging Steel Metal Deposition Using DMLS Process
  86. Altmetric Badge
    Chapter 86 Intra-ply Damage Modeling of Low-Velocity Impact on Composite Laminates
  87. Altmetric Badge
    Chapter 87 Static and Fatigue Analysis of Leaf Spring with EPDM Rubber Sandwiched Between the Steel Leaves
  88. Altmetric Badge
    Chapter 88 Modelling of Surface Roughness and Tool Wear Rate During Turning of AISI 202 Stainless Steel
  89. Altmetric Badge
    Chapter 89 Estimation of the Grain Size Number and Microstructure Analysis of AA6061 Alloy Flow Formed Tubes
  90. Altmetric Badge
    Chapter 90 Production of Biodiesel from Jatropha Oil Using a Heterogeneous Catalyst
  91. Altmetric Badge
    Chapter 91 Effect of Compression Ratio and Injection Timing on the Performance of a B20 Biodiesel Blend Fueled Diesel Engine
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user
wikipedia
1 Wikipedia page

Citations

dimensions_citation
21 Dimensions

Readers on

mendeley
35 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
International Conference on Emerging Trends in Engineering (ICETE)
Published by
Springer International Publishing, September 2019
DOI 10.1007/978-3-030-24314-2
ISBNs
978-3-03-024313-5, 978-3-03-024314-2
Editors

Satapathy, Suresh Chandra, Raju, K. Srujan, Molugaram, Kumar, Krishnaiah, Arkanti, Tsihrintzis, George A.

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 35 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 35 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 11 31%
Student > Master 6 17%
Student > Bachelor 4 11%
Researcher 3 9%
Professor 2 6%
Other 5 14%
Unknown 4 11%
Readers by discipline Count As %
Engineering 22 63%
Computer Science 2 6%
Materials Science 2 6%
Decision Sciences 1 3%
Physics and Astronomy 1 3%
Other 1 3%
Unknown 6 17%