↓ Skip to main content

Structural Integrity Assessment

Overview of attention for book
Cover of 'Structural Integrity Assessment'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Towards Improved Modeling of Variable-Amplitude Fatigue Crack Growth—Theory and Fractographic Validation
  3. Altmetric Badge
    Chapter 3 Cyclic Strain Localization Assessment by Advanced Microscopies
  4. Altmetric Badge
    Chapter 4 Analysis of Subcritical Crack Growth Using Kitagawa–Takahashi Diagram
  5. Altmetric Badge
    Chapter 5 Surprising Corrosion Failures of Standard and Special Stainless Steels and Nickel Base Alloys in Chemical Process Environments
  6. Altmetric Badge
    Chapter 6 Modelling of Low Cycle Fatigue Failure Through Damage Mechanics
  7. Altmetric Badge
    Chapter 7 Influence of Stacking Sequence on Mechanical Properties and Vibration Characteristics of Glass/Carbon Hybrid Plates with Different Fabric Areal Densities
  8. Altmetric Badge
    Chapter 8 Process Parameter Optimization of A-TIG Welding on P22 Steel
  9. Altmetric Badge
    Chapter 9 Influence of Thermomechanical Treatment in Austenitic and Ferritic Fields on Tensile Properties of Reduced Activation Ferritic–Martensitic Steel
  10. Altmetric Badge
    Chapter 10 Improvement on High-Temperature Mechanical Properties of Modified 9Cr-1Mo Steel Through Intermediate Hot Rolling
  11. Altmetric Badge
    Chapter 11 Effect of Aging Heat Treatment on the Microstructure of Gas Tungsten Arc-Welded Inconel Superalloy 718
  12. Altmetric Badge
    Chapter 12 Effectiveness of Polyurea Coated Steel Plates in Blast Mitigation in Vehicles
  13. Altmetric Badge
    Chapter 13 Evolution of Tribological Properties of Cast Al–10Zn–2Mg Alloy Subjected to Severe Plastic Deformation
  14. Altmetric Badge
    Chapter 14 Finite Difference-Based Conduction Model of Weld Pool for Laser and TIG Welding
  15. Altmetric Badge
    Chapter 15 Deformation and Fracture Behavior of Cold-Drawn Pearlitic Steel Wires After Heat Treatment
  16. Altmetric Badge
    Chapter 16 Microstructure, Mechanical, and Magnetic Properties of Cold-Rolled Low-Carbon IF Steel
  17. Altmetric Badge
    Chapter 17 Optimization of Mechanical Characteristics of UHMWPE Composites Using Computational Intelligence
  18. Altmetric Badge
    Chapter 18 Machining of Kevlar Aramid Fiber-Reinforced Plastics (K-1226) Using Solid Carbide Step Drill K44
  19. Altmetric Badge
    Chapter 19 Performance Enhancement of UHMWPE with Surface Functionalized Multiwalled Carbon Nanotubes/Graphite
  20. Altmetric Badge
    Chapter 20 Elastic Properties of Non-self-Similar Two Hierarchical Bio-inspired Unidirectional Composites
  21. Altmetric Badge
    Chapter 21 Molecular Dynamics Simulations Study on the Grain Size Dependence of Deformation and Failure Behavior of Polycrystalline Cu
  22. Altmetric Badge
    Chapter 22 Development of Hybrid Solid Element Using Hybrid Stress–Displacement Formulation
  23. Altmetric Badge
    Chapter 23 Mixed-Mode Creep Crack Growth Simulations Using Continuum Damage Mechanics and Virtual Node XFEM
  24. Altmetric Badge
    Chapter 24 Influence of Curvature Ratio on Perforation of 2024 Aluminium by Conical Impactor
  25. Altmetric Badge
    Chapter 25 Numerical Studies on Ratcheting Behaviour of Straight Pipes
  26. Altmetric Badge
    Chapter 26 A Comparison of Applied Element Method and Finite Element Method for Elastostatic Problems
  27. Altmetric Badge
    Chapter 27 Seismic Behaviour of Steel–Fibre-Reinforced GGBS Concrete Beam-Column Joints
  28. Altmetric Badge
    Chapter 28 Experimental Investigation on the Fracture Behaviour of Polypropylene Fibre-Reinforced Rubcrete
  29. Altmetric Badge
    Chapter 29 Effects of Water to Cement Ratio on Concrete Fracture Parameters
  30. Altmetric Badge
    Chapter 30 Mechanical and Dynamic Properties of Polypropylene Fiber Reinforced Concrete
  31. Altmetric Badge
    Chapter 31 Influence of Creep on Isothermal and Thermomechanical Low Cycle Fatigue of Type 316 LN SS Weld Joint
  32. Altmetric Badge
    Chapter 32 Creep Deformation Behaviour of Modified 9Cr-1Mo Steel Clad Tubes
  33. Altmetric Badge
    Chapter 33 Identifying the Creep Deformation Mechanism in P9 Steel at Elevated Temperatures
  34. Altmetric Badge
    Chapter 34 Developments in Assessing Welds in High Temperature Conditions and Different Stress Triaxialities
  35. Altmetric Badge
    Chapter 35 Creep Rupture Behaviour of Alloy 625 Nickel-Base Superalloy Casting for Advanced Ultra Supercritical Power Plant Applications
  36. Altmetric Badge
    Chapter 36 Feasibility of ACI 318-14 Strut-and-Tie Provisions for the Analysis and Design of Rubcrete and Steel Fibre Reinforced Rubcrete Deep Beams
  37. Altmetric Badge
    Chapter 37 Hot Bending of Large Size Seamless Primary Pipe for Sodium Cooled Fast Breeder Reactor
  38. Altmetric Badge
    Chapter 38 Dynamic Response of Sacrificial Curved Steel Wall Under Blast Loading
  39. Altmetric Badge
    Chapter 39 Free Vibration Analysis of Levy-Type Smart Hybrid Plates Using Three-Dimensional Extended Kantorovich Method
  40. Altmetric Badge
    Chapter 40 Analysis of Orthotropic Variable Thickness Rotating Disc
  41. Altmetric Badge
    Chapter 41 Shear Resistance Models of Girders with Corrugated Webs
  42. Altmetric Badge
    Chapter 42 Study and Comparison of Composite Shells with Metallic Shells for Underwater Vessel Application Using FEA
  43. Altmetric Badge
    Chapter 43 Experimental Measurements of Interface Fracture Toughness Using Double Cantilever Bending
  44. Altmetric Badge
    Chapter 44 Dynamic Fracture Behavior in HSLA Steel
  45. Altmetric Badge
    Chapter 45 Fracture Toughness Characterization of Mod.9Cr-1Mo Welds
  46. Altmetric Badge
    Chapter 46 Effect of Microstructure on the Fatigue Crack Growth Behavior in Al–Zn–Mg–Cu Alloy
  47. Altmetric Badge
    Chapter 47 Rate Dependence of Dynamic Fracture Toughness of 20MnMoNi55 Low-Carbon Steel Using Two Methods on Instrumented Drop Weight Test of PCVN
  48. Altmetric Badge
    Chapter 48 Hardened Materials Material Deformation Study Using Digital Image Correlation Technique for Nuclear Power Plant Applications
  49. Altmetric Badge
    Chapter 49 An Experimental Study on Adhesion, Friction and Stick-Slip Phenomena
  50. Altmetric Badge
    Chapter 50 Experimental Investigation of Material Constant for Perforated Plate
  51. Altmetric Badge
    Chapter 51 Assessment of Speckle Pattern for Use in Digital Image Correlation Analysis Using Simulated Displacement Field
  52. Altmetric Badge
    Chapter 52 Failure Investigation of an Industrial Turbine Blade
  53. Altmetric Badge
    Chapter 53 Fault Diagnosis and Root Cause Failure Analysis of Press Roller Mill for Heavy Industry
  54. Altmetric Badge
    Chapter 54 Fatigue Failure of a Spiral Bevel Gear in a Typical Low-Bypass Turbofan Engine
  55. Altmetric Badge
    Chapter 55 Low Cyclic Fatigue Behavior of Alloy 625 at Ambient and Elevated Temperatures
  56. Altmetric Badge
    Chapter 56 Comparison of LCF Performance of a Ferritic Steel Strengthened with Nanoprecipitates with that of a Conventional HSLA Steel
  57. Altmetric Badge
    Chapter 57 Fatigue Life Estimation of Welded Plate Girder of Railway Bridge
  58. Altmetric Badge
    Chapter 58 Fretting Fatigue Behavior of Aluminum Alloy
  59. Altmetric Badge
    Chapter 59 Role of Stacking Fault Energy on Symmetric and Asymmetric Cyclic Deformation Behavior of FCC Metals
  60. Altmetric Badge
    Chapter 60 Ratcheting Behavior of SA333 Gr-6 C–Mn Steel at Elevated Temperatures
  61. Altmetric Badge
    Chapter 61 Stress–Strain Behaviour of Modified 9Cr–1Mo Steel in Asymmetric Cyclic Stressing at Room Temperature
  62. Altmetric Badge
    Chapter 62 High Cycle Fatigue Behaviour of a 10 wt% Cr Steel at Ambient and Elevated Temperatures
  63. Altmetric Badge
    Chapter 63 Detection of Multiple Flaws in Steam Generator Tubes of PFBR Using Ultrasonic Guided Waves
  64. Altmetric Badge
    Chapter 64 Structural Health Monitoring of Cantilever Beam, a Case Study—Using Bayesian Neural Network and Deep Learning
  65. Altmetric Badge
    Chapter 65 Effect of Boundary Conditions in Damage Detection of Aluminum Beams Using PZT
  66. Altmetric Badge
    Chapter 66 A Novel Hybrid Technique to Identify the Minor Cracks in the Structure During Online Health Monitoring
  67. Altmetric Badge
    Chapter 67 Experimental Studies on Qualification of Structural Integrity of Eddy Current Flow Meter
  68. Altmetric Badge
    Chapter 68 Seismic Performance of Nine-Story Self-centering Buckling-Restrained Braced Frames
  69. Altmetric Badge
    Chapter 69 Numerical Study on the Structural Integrity of Built-up Cold-Formed Steel Battened Columns
  70. Altmetric Badge
    Chapter 70 Seismic Performance of Shutdown System of Indian Pressurized Heavy Water Reactors
  71. Altmetric Badge
    Chapter 71 Parametric Studies on the Seismic Behavior of Irregular Structures
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
12 X users

Citations

dimensions_citation
1 Dimensions

Readers on

mendeley
24 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Structural Integrity Assessment
Published by
Springer Singapore, September 2019
DOI 10.1007/978-981-13-8767-8
ISBNs
978-9-81-138766-1, 978-9-81-138767-8
Editors

Prakash, Raghu V., Suresh Kumar, R., Nagesha, Atikukke, Sasikala, Gomathy, Bhaduri, Arun Kumar

X Demographics

X Demographics

The data shown below were collected from the profiles of 12 X users who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 24 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 24 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 10 42%
Researcher 3 13%
Student > Master 2 8%
Unknown 9 38%
Readers by discipline Count As %
Engineering 9 38%
Materials Science 4 17%
Computer Science 1 4%
Unknown 10 42%