↓ Skip to main content

Reliability, Safety and Hazard Assessment for Risk-Based Technologies

Overview of attention for book
Cover of 'Reliability, Safety and Hazard Assessment for Risk-Based Technologies'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Estimating Passive System Reliability and Integration into Probabilistic Safety Assessment
  3. Altmetric Badge
    Chapter 2 PSA Level-2 Study: Estimation of Source Term for Postulated Accidental Release from Indian PHWRs
  4. Altmetric Badge
    Chapter 3 Comprehensive Safety Analysis of Station Blackout Scenario in TAPS-1&2
  5. Altmetric Badge
    Chapter 4 Probabilistic Safety Assessment of a Typical Chemical Process Plant
  6. Altmetric Badge
    Chapter 5 PSA Level-3 Study—Estimation of Area and Persons Affected for Postulated Accidental Release from Indian PHWR After Implementing Urgent Protective Actions
  7. Altmetric Badge
    Chapter 6 Shutdown Probabilistic Safety Assessment of Boiling Water Reactor
  8. Altmetric Badge
    Chapter 7 Probabilistic Safety Assessment of Process Plant Handling Hydrogen and Radioactive Fluid
  9. Altmetric Badge
    Chapter 8 Source-Term Prediction During Loss of Coolant Accident in NPP Using Artificial Neural Networks
  10. Altmetric Badge
    Chapter 9 Time-Dependent Short Mode Failures in MLCCs Due to Cracks in the Device Bodies
  11. Altmetric Badge
    Chapter 10 Local Orbit Bump Control in Indus-2 Using Intelligent Agents-Based Control for Enhanced System Operability
  12. Altmetric Badge
    Chapter 11 Reliability Analysis of Smart Pressure Transmitter
  13. Altmetric Badge
    Chapter 12 Accelerated Failure Time Models with Corrective and Preventive Maintenance for Repairable Systems Subject to Imperfect Repair
  14. Altmetric Badge
    Chapter 13 Reliability Improvement of Single-Shot Device
  15. Altmetric Badge
    Chapter 14 Reliability Evaluation of Silicon Carbide (SiC) Boost Converter Using Stochastic Model
  16. Altmetric Badge
    Chapter 15 Application of HALT for Standardization in Aerospace Systems: A Case Study of Relay Contactors
  17. Altmetric Badge
    Chapter 16 Failure Mode Effect Analysis of Analog Alarm Trip Unit Using Simulation Technique
  18. Altmetric Badge
    Chapter 17 Ageing Model for Electrolytic Capacitors Under Thermal Overstress
  19. Altmetric Badge
    Chapter 18 Analytical Modelling of Distributed File Systems (GlusterFS and CephFS)
  20. Altmetric Badge
    Chapter 19 Vulnerability Assessment of Authorization System for USB-Based Storage Devices
  21. Altmetric Badge
    Chapter 20 Crypto-Ransomware Detection Using Behavioural Analysis
  22. Altmetric Badge
    Chapter 21 Software Reliability Growth as an Offshoot of Verification and Validation Process
  23. Altmetric Badge
    Chapter 22 A Review of Recent Dynamic Reliability Analysis Methods and a Proposal for a Smart Component Methodology
  24. Altmetric Badge
    Chapter 23 Cell-to-Cell Mapping Technique Application for Dynamic Reliability Estimation
  25. Altmetric Badge
    Chapter 24 ARM SoC-Based VME CPU Board Development Using Open-Source Framework for Intelligent Accelerator Control System
  26. Altmetric Badge
    Chapter 25 Architecture-Centric Dependability Analysis for I&C Safety Systems in NPP: A Case Study
  27. Altmetric Badge
    Chapter 26 Modeling Inhomogeneous Markov Process in Smart Component Methodology
  28. Altmetric Badge
    Chapter 27 Estimation of Residual Lifespan of Instrumentation & Control (I&C) Cables of Nuclear Power Plants by Elongation Measurement
  29. Altmetric Badge
    Chapter 28 Finding Reciprocities Between the Intellectual Frames of Resilience Engineering and High Reliability Organizations
  30. Altmetric Badge
    Chapter 29 Improved Adaptive Response Surface Method for Reliability Analysis of Structures
  31. Altmetric Badge
    Chapter 30 Adaptive Metamodel-Based Robust Design Optimization of RC Frame Under Stochastic Blast Load
  32. Altmetric Badge
    Chapter 31 Mesh Stiffness Variation Due to the Effect of Back-Side Contact of Gears
  33. Altmetric Badge
    Chapter 32 Estimation of Damage Due to Fatigue, Impact Loading in CFRP Laminates Through Multi-sampling Image Analysis Technique
  34. Altmetric Badge
    Chapter 33 Size Effect in Bimodular Flexural Cylindrical Specimens
  35. Altmetric Badge
    Chapter 34 Bayesian Model Calibration and Model Selection of Non-destructive Testing Instruments
  36. Altmetric Badge
    Chapter 35 Fusion of Rebound Number and Ultrasonic Pulse Velocity Data for Evaluating the Concrete Strength Using Bayesian Updating
  37. Altmetric Badge
    Chapter 36 Stochastic Free Vibration Analysis of Sandwich Plates: A Radial Basis Function Approach
  38. Altmetric Badge
    Chapter 37 Risk Analysis of Piping System of NRNF
  39. Altmetric Badge
    Chapter 38 Stress Analysis and Qualification of Non-standard Gasket Joint of Heavy Water Heat Exchanger
  40. Altmetric Badge
    Chapter 39 Reliability-Based Design Optimization of a Large-Scale Truss Structure Using Polynomial Chaos Expansion Metamodel
  41. Altmetric Badge
    Chapter 40 Influence of System Compliance on Contact Stresses in Fretting
  42. Altmetric Badge
    Chapter 41 Development of Methodology for Seismic Qualification of Dhruva Reactor Components
  43. Altmetric Badge
    Chapter 42 Experimental Modal Analysis of Polypropylene Fiber Reinforced Concrete
  44. Altmetric Badge
    Chapter 43 Design and Health Monitoring of Tensegrity Structures: An Overview
  45. Altmetric Badge
    Chapter 44 Performance Prediction of Rolling Element Bearing with Utilization of Support Vector Regression
  46. Altmetric Badge
    Chapter 45 Statistical Variation in Creep of Concrete—An Experimental Investigation
  47. Altmetric Badge
    Chapter 46 Evaluation of Fracture Parameters of Cracks in Compressor Blade Root Using Digital Photoelasticity
  48. Altmetric Badge
    Chapter 47 Hybrid Response Surface Function-Based Metamodeling of Response Approximation for Reliability Analysis
  49. Altmetric Badge
    Chapter 48 Durability-Based Service Life Design of RC Structures—Chloride-Induced Corrosion
  50. Altmetric Badge
    Chapter 49 Artificial-Neural-Network-Based Uncertain Material Removal Rate by Turning
  51. Altmetric Badge
    Chapter 50 Failure Analysis and Process Capability Study of Transmission System at the End of Assembly Line
  52. Altmetric Badge
    Chapter 51 Ball Bearing Fault Diagnosis Using Mutual Information and Walsh–Hadamard Transform
  53. Altmetric Badge
    Chapter 52 Storage Service Reliability and Availability Predictions of Hadoop Distributed File System
  54. Altmetric Badge
    Chapter 53 Quality Assurance in Sustaining Reliability of Nuclear Reactor Safety Systems
  55. Altmetric Badge
    Chapter 54 Safety and Security of Process Plants: A Fuzzy-Based Bayesian Network Approach
  56. Altmetric Badge
    Chapter 55 Determination of Prony Series Coefficient of Polymer Based on Experimental Data in Time Domain Using Optimization Technique
  57. Altmetric Badge
    Chapter 56 Mode Selection in Variational Mode Decomposition and Its Application in Fault Diagnosis of Rolling Element Bearing
  58. Altmetric Badge
    Chapter 57 Performance Enhancement of Reactor Building Containment Isolation System by Use of Direct-Acting Solenoid Valves
  59. Altmetric Badge
    Chapter 58 Surveillance on Nuclear Instrumentation of Dhruva Research Reactor
  60. Altmetric Badge
    Chapter 59 Reliability Estimation of Reaction Control System of a Flight Vehicle Using Bayesian Networks with Multilevel Data
  61. Altmetric Badge
    Chapter 60 Safety Enhancements in Boiling Water Reactor (BWR) Tarapur Atomic Power Station (TAPS-1&2)
  62. Altmetric Badge
    Chapter 61 Reliability Analysis of Composite Components Under Low-Velocity Impact
  63. Altmetric Badge
    Chapter 62 A Study on Emission Pattern of Semiconductor ICs Using Photon Emission Microscopy
  64. Altmetric Badge
    Chapter 63 CQB—A New Approach for Human Factor Modeling
  65. Altmetric Badge
    Chapter 64 Effects of Human and Organizational Factors on the Reliability and Maintainability of CNC Turning Center
  66. Altmetric Badge
    Chapter 65 Investigation of Human Factors Using HFACS Framework—A Case Study for Unintended Reactor Trip Events in NPP
  67. Altmetric Badge
    Chapter 66 Experience in Development of a Research Reactor Simulator
  68. Altmetric Badge
    Chapter 67 HAMSTER: Human Action Modelling—Standardized Tool for Editing and Recording
  69. Altmetric Badge
    Chapter 68 Markov Probabilistic Approach-Based Availability Simulation Modeling and Performance Evaluation of Coal Supply System of Thermal Power Plant
  70. Altmetric Badge
    Chapter 69 Aerospace Power Supply Modules Reliability Estimation Using ARINC Reliability Apportionment Technique
  71. Altmetric Badge
    Chapter 70 Prediction and Assessment of LHD Machine Breakdowns Using Failure Mode Effect Analysis (FMEA)
  72. Altmetric Badge
    Chapter 71 Investigation of Reliability of DC–DC Converters Using Reliability Block Diagram and Markov Chain Analysis
  73. Altmetric Badge
    Chapter 72 Maximum Entropy Principle in Reliability Analysis
  74. Altmetric Badge
    Chapter 73 Development and Validation of Direct Method-Based Space-Time Kinetics Code for Hexagonal Geometry
  75. Altmetric Badge
    Chapter 74 Reactivity Initiated Transient Analysis of 2 MW Upgraded Apsara Reactor
  76. Altmetric Badge
    Chapter 75 Reactivity Initiated Transient Analysis of 30 MW High Flux Research Reactor
  77. Altmetric Badge
    Chapter 76 Development of a Computer Code for Reactivity Initiated Transient Analysis of Research Reactor with Pin-Type Fuel
  78. Altmetric Badge
    Chapter 77 Reactor Power Variation Due to Tripping of All Three Level Control Pumps
  79. Altmetric Badge
    Chapter 78 Fuzzy FMEA Analysis of Induction Motor and Overview of Diagnostic Techniques to Reduce Risk of Failure
  80. Altmetric Badge
    Chapter 79 Risk-Based Analysis of Electro-Explosive Devices Switching System: A Case Study of Aerospace System
  81. Altmetric Badge
    Chapter 80 Value Tree Analysis Approach for Integrated Risk-Informed Decision Making: Revision of Allowed Outage Time
  82. Altmetric Badge
    Chapter 81 A Deterministic Approach to Quantify the Risk in Propellant Processing Unit Using Bow Tie Analysis
  83. Altmetric Badge
    Chapter 82 Risk-Based Approach for Thermal Profiling of Sodium Vessel and Pipelines of Prototype Fast Breeder Reactor
  84. Altmetric Badge
    Chapter 83 Risk Estimation of a Typical Uranium Metal Production Plant
  85. Altmetric Badge
    Chapter 84 Radiation Levels in Structural Components of Cirus Reactor—Estimation and Measurement
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Readers on

mendeley
6 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Reliability, Safety and Hazard Assessment for Risk-Based Technologies
Published by
Springer Singapore, September 2019
DOI 10.1007/978-981-13-9008-1
ISBNs
978-9-81-139007-4, 978-9-81-139008-1
Editors

Varde, Prabhakar V., Prakash, Raghu V., Vinod, Gopika

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 6 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 6 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 3 50%
Unknown 3 50%
Readers by discipline Count As %
Engineering 2 33%
Biochemistry, Genetics and Molecular Biology 1 17%
Unknown 3 50%