↓ Skip to main content

Characterization of Minerals, Metals, and Materials 2020

Overview of attention for book
Cover of 'Characterization of Minerals, Metals, and Materials 2020'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Characterization of Iron Ore Sinter Samples by Automated SEM
  3. Altmetric Badge
    Chapter 2 Effects of Sintering Temperature and Time on Preparation of Refractory Materials from Ferronickel Slag Under Microwave Irradiation
  4. Altmetric Badge
    Chapter 3 Non-isothermal Carbothermic Reduction Kinetics of Calcium Ferrite
  5. Altmetric Badge
    Chapter 4 Gasificating Dephosphorization During the Carbothermic Reduction of Medium Phosphorus Iron Ore Concentrate in the Presence of Na 2 CO 3 and SiO 2
  6. Altmetric Badge
    Chapter 5 Trends in Characterization and Beneficiation of Non-ferrous Metallic Ores in Nigeria
  7. Altmetric Badge
    Chapter 6 Kinetics of Coke Gasification Reaction Catalyzed by Alkali Carbonates
  8. Altmetric Badge
    Chapter 7 Phase Transformation Characterization by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing of Steel Steel Sheet Parts
  9. Altmetric Badge
    Chapter 8 Austenite Stability Under Focused Ion Beam Milling
  10. Altmetric Badge
    Chapter 9 Experimental Research on Pellet Production with Boron-Containing Concentrate
  11. Altmetric Badge
    Chapter 10 Leaching of Platinum Group Metals from Automobile Spent Catalyst
  12. Altmetric Badge
    Chapter 11 Characterization on the Behaviors of Ca and Si Constituents During the Consolidation of Ferruginous Manganese Ores
  13. Altmetric Badge
    Chapter 12 Microscopic Appearance Transformation of Bornite During Acid Leaching and Bioleaching
  14. Altmetric Badge
    Chapter 13 Pb(II) Removal from Acidic Wastewater by Magnetic Manganese Ferrites Synthesized from Ferromanganese Ores
  15. Altmetric Badge
    Chapter 14 Recovery of Valuable Metals from the Leaching Tailings from the Arsenic/Nickel/Cobalt Residue
  16. Altmetric Badge
    Chapter 15 Effect of Microstructure on Cleavage Fracture of Thick-Section Quenched and Tempered S690 High-Strength Steel
  17. Altmetric Badge
    Chapter 16 Effect of Thermal Aging on Impact Toughness of Electron Beam-Welded AISI 316 Stainless Steel
  18. Altmetric Badge
    Chapter 17 Preparation and Photocatalytic Properties of Mo-Doped TiO 2 @Fly Ash Cenospheres for Degradation of Methylene Blue
  19. Altmetric Badge
    Chapter 18 Removing Arsenic from the NiSO 4 Solution Using Modified D301 Resin
  20. Altmetric Badge
    Chapter 19 Activated Carbon Prepared from Bituminous Coal/Poplar Blends by Direct KOH Activation
  21. Altmetric Badge
    Chapter 20 Preparation of Thermal Insulation Materials from Ferronickel Slag with Addition of Fly Ash Cenosphere
  22. Altmetric Badge
    Chapter 21 Leaching of Copper, Cobalt, and Nickel from Complex Ore
  23. Altmetric Badge
    Chapter 22 Corrosion Inhibition Effect of Clove Essential Oil Extract with Basil and Atlas Cedar Oil on Mild Steel in Dilute Acid Environment
  24. Altmetric Badge
    Chapter 23 Effect of Dual Phase Stabilization via Varying Ti/Nb Ratios on the Pitting Behavior of AISI 347 Welds
  25. Altmetric Badge
    Chapter 24 Corrosion Resistance of GX4CrNiMo16-5-1 Martensitic, 316L Austenitic, and 904L Austenitic Stainless Steels Subjected to High Temperature Variation
  26. Altmetric Badge
    Chapter 25 Influence on the Structural and Magnetic Properties of the Pre-alloyed Gas-Atomized Maraging Steel Powder During Mechanical Milling
  27. Altmetric Badge
    Chapter 26 Phase Diagram of the InP Binary System
  28. Altmetric Badge
    Chapter 27 Formation of the Carbon-Enriched Zone and Its Evolution During the Long-Term Aging Process for 9% Cr-CrMoV Dissimilar Welded Joint
  29. Altmetric Badge
    Chapter 28 The Evolution of Precipitates in a Novel Heat-Resistant Martensitic Steel During Creep
  30. Altmetric Badge
    Chapter 29 Synthesis and Characterization of Ultra-Hard Ceramic AlMgB 14 -Based Materials Obtained from Al x Mg y Intermetallic Powder and Boron Powder by the Spark Plasma Sintering
  31. Altmetric Badge
    Chapter 30 Microstructure Evolution of Additively Manufactured TiC Reinforced Graded Metal Matrix Composite
  32. Altmetric Badge
    Chapter 31 A Bibliometric Analysis of the Strategy and Performance Measurement of the Polymer Matrix Nanomaterials Development Scenario Globally, and the Participation of Brazil
  33. Altmetric Badge
    Chapter 32 Evaluation of Biodiesel Obtained from Waste Cooking Oil Purified with a Modified Clay
  34. Altmetric Badge
    Chapter 33 Mechanical Behavior of Thermoplastic Filaments Fabricated with the Fused Modeling Deposition Technique
  35. Altmetric Badge
    Chapter 34 Characterization of a Brazilian Kaolin and Its Sorption Ability to Mineral Oils
  36. Altmetric Badge
    Chapter 35 Fabrication of Ultra-High Molecular Weight Polyethylene Membrane and Evaluation of Physical Characteristics for Wastewater Treatment
  37. Altmetric Badge
    Chapter 36 A Comparison Between Graphene Oxide and Reduced Graphene Oxide as Reinforcement Agents in Polypropylene Nanocomposite Using Irradiated Polypropylene as Compatibilizer
  38. Altmetric Badge
    Chapter 37 A New Method to Obtain Cellulose Nanofiber from Wood
  39. Altmetric Badge
    Chapter 38 Analysis of β ´ (Cu 4 Ti) Precipitation During Isothermal Aging of a Cu–4 wt%Ti Alloy
  40. Altmetric Badge
    Chapter 39 Analysis of Nanoscale Iron Oxide Morphology
  41. Altmetric Badge
    Chapter 40 Analysis of the Effect of Marine Salinity in Durability of Red Ceramics Calcinated in Different Temperature
  42. Altmetric Badge
    Chapter 41 Application of Nanoparticles of ZnO and ZnO-Doped-Ag in Polymeric Blend of HMSPP/SEBS for Biocide Activity
  43. Altmetric Badge
    Chapter 42 Characterization and Metallurgical Performance of Titangarnet
  44. Altmetric Badge
    Chapter 43 Characterization by FTIR of Oxidized Pyrargyrite with Sodium Sulfide
  45. Altmetric Badge
    Chapter 44 Characterization by FTIR of Sphalerite Obtained in the Flotation Without Collector in the Presence of Ferric Iron
  46. Altmetric Badge
    Chapter 45 Characterization of Bentonite Beneficiation Residue for Use in Structural Ceramics
  47. Altmetric Badge
    Chapter 46 Characterization of Clay Mix with Incorporation of Granite Waste for the Production of Ceramic Tiles
  48. Altmetric Badge
    Chapter 47 Characterization of Hydrogels for Release of Cosmetic Assets Containing Nanoemulsions of Mandellic Acid in Different Concentrations of Pseudoboehmite
  49. Altmetric Badge
    Chapter 48 Chemical and Mineralogical Characterization of a Cuprite–Miargyrite Ore and Proposal of Elimination of Semimetals by Alkaline Bath
  50. Altmetric Badge
    Chapter 49 Chemical Characterization and Mineralogical Analysis of Mining-Metallurgical Tailing from the State of Morelos
  51. Altmetric Badge
    Chapter 50 Development and Characterization of a Luminescent Coating for Asphalt Pavements
  52. Altmetric Badge
    Chapter 51 Effect of Alloying Elements on Age Hardening and Coarsening of β′ Precipitates in Isothermally Aged Fe–Ni–Al Based Alloys
  53. Altmetric Badge
    Chapter 52 Effect of Different Ti-Sn Intermetallic Compounds Addition on Synthesis of Ti 2 SnC by Self-Propagating High-Temperature Combustion Technique
  54. Altmetric Badge
    Chapter 53 Dynamic Mechanical Behaviour of Lean Duplex Stainless Steel 2101
  55. Altmetric Badge
    Chapter 54 Capillary Absorption Evaluation of Different Mortars Applied in Civil Construction
  56. Altmetric Badge
    Chapter 55 Fundamental Study on Wettability of Pure Metal by Liquid Sodium
  57. Altmetric Badge
    Chapter 56 How to Measure High-Temperature Heat Capacity Reliably by Drop Calorimetry
  58. Altmetric Badge
    Chapter 57 Improvement Properties of Polypropylene by Graphene Oxide Incorporation
  59. Altmetric Badge
    Chapter 58 Influence of Sealing Mortar in the Strength of Compression of the Structural Masonry Ceramic
  60. Altmetric Badge
    Chapter 59 Influence of the Reduced Graphene Oxide Incorporation on Properties of Acrylonitrile Butadiene Styrene (ABS)
  61. Altmetric Badge
    Chapter 60 Inhibition of Flame Propagation in Nanocomposites with Expanded Polystyrene Recycled Clay, Gypsum, and Titanium Dioxide
  62. Altmetric Badge
    Chapter 61 Investigating the Effect of Sintering Temperature on Structural and Tribological Properties of a Nanostructured Ti–20Nb–13Zr Alloy for Biomedical Applications
  63. Altmetric Badge
    Chapter 62 Investigation on Mechanical and Thermal Behaviours of PBAT/PLA Blend Reinforced with Reduced Graphene Oxide Nanosheets
  64. Altmetric Badge
    Chapter 63 Iron Ore Fines Granulation in a New High Speed Mixing Granulator
  65. Altmetric Badge
    Chapter 64 Leaching of Pre-Oxidated Pyrargyrite with Na 2 S 2 O 5
  66. Altmetric Badge
    Chapter 65 Mechanical and Morphological Properties of Hybrid Composites Based on Recycled LDPE/EVA Blend Reinforced with Clay and Babassu Fiber Residues
  67. Altmetric Badge
    Chapter 66 Preparation of Lithium Ion Battery Anode Materials from Precipitation Flotation Product
  68. Altmetric Badge
    Chapter 67 Processing and Characterization of Polyethylene-AgNPs Films—Biocide Effect
  69. Altmetric Badge
    Chapter 68 Production and Characterization of PBAT Reinforced with Clay and Graphene Oxide Nanosheets—A Comparative Study
  70. Altmetric Badge
    Chapter 69 Study of Styrene Effect on Non-radiation Grafting of Vinyl Benzyl Chloride on to Polyethylene-Based Anion Exchange Membrane
  71. Altmetric Badge
    Chapter 70 Study on the Separation of Zinc and Iron in Electric Arc Furnace Baghouse Dusts and Its Kinetics
  72. Altmetric Badge
    Chapter 71 Synthesis and Characterization of BaTiO 3 Doped with Eu 3+ by the Reaction Solid-State Method
  73. Altmetric Badge
    Chapter 72 Synthesis and Characterization on Copper Oxide Anode of Lithium-Ion Battery
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

twitter
1 X user

Citations

dimensions_citation
4 Dimensions
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
Characterization of Minerals, Metals, and Materials 2020
Published by
Springer International Publishing, February 2020
DOI 10.1007/978-3-030-36628-5
ISBNs
978-3-03-036627-8, 978-3-03-036628-5
Editors

Li, Jian, Zhang, Mingming, Li, Bowen, Monteiro, Sergio Neves, Ikhmayies, Shadia, Kalay, Yunus Eren, Hwang, Jiann-Yang, Escobedo-Diaz, Juan P., Carpenter, John S., Brown, Andrew D.

X Demographics

X Demographics

The data shown below were collected from the profile of 1 X user who shared this research output. Click here to find out more about how the information was compiled.