↓ Skip to main content

TMS 2020 149th Annual Meeting

Overview of attention for book
Cover of 'TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 In Situ Analysis of Incipient Melting in a Novel High Strength Al–Cu Cast Alloy Using Laser Scanning Confocal Microscopy (LSCM)
  3. Altmetric Badge
    Chapter 2 In Situ Diagnosis and Modeling of Disorder Trapping in Rapid Solidification of Intermetallic Compound
  4. Altmetric Badge
    Chapter 3 Development of HT-LSCM Techniques for the In Situ Study of the Peritectic Phase Transition
  5. Altmetric Badge
    Chapter 4 Sub-rapid Solidification Study of Silicon Steel by Using Dip Test Technique
  6. Altmetric Badge
    Chapter 5 HT-LSCM as a Tool for Indirect Determination of Precipitates by Real-Time Grain Growth Observations
  7. Altmetric Badge
    Chapter 6 A Novel Method of Research on Dissolution Kinetics of Alumina in Mold Flux Based on Hot Thermocouple Technique
  8. Altmetric Badge
    Chapter 7 Study on the Interaction Process Between Mold Flux and TiN/TiO 2 by Sessile Drop Method
  9. Altmetric Badge
    Chapter 8 Real-Time Imaging of Melting and Crystallization of Synthetic Ferronickel Slags with Varying B 2 O 3 Content
  10. Altmetric Badge
    Chapter 9 An Investigation of the Impact Experimental Equipment Parameters Have on Synthetic Slag Behaviors in an Oxidative Environment Using a Confocal Laser Microscope
  11. Altmetric Badge
    Chapter 10 Expedited Optimization of AM Materials Using Miniaturized Testing
  12. Altmetric Badge
    Chapter 11 Improvement of Fatigue Strength in Lightweight Selective Laser Melted Alloys by In-Situ and Ex-Situ Composition and Heat Treatment
  13. Altmetric Badge
    Chapter 12 A Fatigue Life Approach for Additively Manufactured Structures
  14. Altmetric Badge
    Chapter 13 Deriving the Structural Fatigue Behavior of Additively Manufactured Components
  15. Altmetric Badge
    Chapter 14 Mechanical Testing of 3D Printed Materials
  16. Altmetric Badge
    Chapter 15 Microstructural Characterization and Thermomechanical Behavior of Additively Manufactured AlSi10Mg Material and Architected Cellular Structures
  17. Altmetric Badge
    Chapter 16 Preliminary Concepts of an Automated Additive Manufacturing System for Accident Tolerant Uranium Silicide Fuel Pellets
  18. Altmetric Badge
    Chapter 17 Creep Behavior of a AlSiMg Alloy Produced by Additive Manufacturing
  19. Altmetric Badge
    Chapter 18 Microstructural Development and Mechanical Properties of Selective Laser Melted Co–Cr–W Dental Alloy
  20. Altmetric Badge
    Chapter 19 Characterization of 17-4 PH Processed via Bound Metal Deposition (BMD)
  21. Altmetric Badge
    Chapter 20 Portland 3D Printing of Portland Cement Pastes with Additions of Kaolin, Superplastificant, and Calcium Carbonate
  22. Altmetric Badge
    Chapter 21 Additive Manufacturing of Aluminum Using Friction Stir Deposition
  23. Altmetric Badge
    Chapter 22 Impacts of Friction Stir Processing on Microstructure and Corrosion Properties of DMLS-AlSi10Mg
  24. Altmetric Badge
    Chapter 23 Effect of Counter-Gravity 3D Printing on PLA Interlayer Fracture Energy
  25. Altmetric Badge
    Chapter 24 Production of Teaching Materials Through 3D Printing as Support for Educational Processes Related to the Sciences, Heritage, and Culture
  26. Altmetric Badge
    Chapter 25 A Novel Titanium Alloy for Additively Manufactured Orthopaedic Implants
  27. Altmetric Badge
    Chapter 26 Hybrid Additive Manufacturing of MS1-H13 Steels via Direct Metal Laser Sintering
  28. Altmetric Badge
    Chapter 27 On the Effect of Building Direction on the Microstructure and Grain Morphology of a Selective Laser Melted Maraging Stainless Steel
  29. Altmetric Badge
    Chapter 28 Phase-Field Simulation of Solidification Behavior of AlSi10Mg Alloys Manufactured Through Direct Metal Laser Sintering
  30. Altmetric Badge
    Chapter 29 Low Surface Roughness Additively Manufactured AlSi10Mg: The Impacts on Corrosion and Water Repellency Properties
  31. Altmetric Badge
    Chapter 30 Experimental Evaluation of Additively Manufactured Continuous Fiber Reinforced Nylon Composites
  32. Altmetric Badge
    Chapter 31 Annealing of Additively Manufactured Inconel 625
  33. Altmetric Badge
    Chapter 32 Critical Quenching Rates After Solution Annealing: Peculiarities of Aluminum–Silicon Alloys Fabricated by Laser Powder-Bed Fusion
  34. Altmetric Badge
    Chapter 33 Effect of Scanning Strategy on Additively Manufactured Ti6Al4V
  35. Altmetric Badge
    Chapter 34 Experimental Study on the Laser Cladding of T15 Coating for 42CrMo Steel
  36. Altmetric Badge
    Chapter 35 Gamma-Titanium Intermetallic Alloy Produced by Selective Laser Melting Using Mechanically Alloyed and Plasma Spheroidized Powders
  37. Altmetric Badge
    Chapter 36 Investigation of Martensite α ’ Phase Transformation During Heat Treatment of High-Speed Selective Laser Melted Ti6Al4V Components
  38. Altmetric Badge
    Chapter 37 Mechanical Properties of AlSi10Mg Processed by Laser Powder Bed Fusion at Elevated Temperature
  39. Altmetric Badge
    Chapter 38 Microstructural Characteristics of Stainless Steel 316L Processed by Selective Laser Melting Technology
  40. Altmetric Badge
    Chapter 39 Microstructure and Mechanical Properties of AISI 420 Stainless Steel Produced by Wire Arc Additive Manufacturing
  41. Altmetric Badge
    Chapter 40 On the Heat Treatment of AlSi10Mg Fabricated by Selective Laser Melting Process
  42. Altmetric Badge
    Chapter 41 On the Microstructure and Corrosion Behavior of Wire Arc Additively Manufactured AISI 420 Stainless Steel
  43. Altmetric Badge
    Chapter 42 On the Size Effects in Additively Manufactured Titanium and the Implications in AM Components
  44. Altmetric Badge
    Chapter 43 Precipitation Behaviour and Its Strengthening Effect of Maraging Steel in Laser Cladding Remanufacturing
  45. Altmetric Badge
    Chapter 44 Scaling up Build Rates in Laser Powder Bed Fusion of Metals Using Dimensionless Parameters
  46. Altmetric Badge
    Chapter 45 The Effects of LENS Process Parameters on the Behaviour of 17-4 PH Stainless Steel
  47. Altmetric Badge
    Chapter 46 The Process Parameters Extended Criterion for Laser Engineered Net Shaping of Inconel 738
  48. Altmetric Badge
    Chapter 47 A Novel High-Strength Oxidization-Resistant Press Hardening Steel Sheet Requiring No Al–Si Coating
  49. Altmetric Badge
    Chapter 48 Effect of the Cooling Time on the Cross Tensile Strength of the Resistance Spot Welded Medium Manganese Steel
  50. Altmetric Badge
    Chapter 49 In Situ Observation of the Peritectic Reaction and Transformation in a Commercial HSLA Steel
  51. Altmetric Badge
    Chapter 50 Effect of Al Content and Solution Treatment on Tensile and Corrosion Resistance of Fe–Mn–Al–C Low-Density Steel
  52. Altmetric Badge
    Chapter 51 Effects of M (M=Ce, Zr, Ce–Zr) Compound Treatment on Characteristics of Inclusions and Microstructure FH40 Ship-Building Steel Ingots
  53. Altmetric Badge
    Chapter 52 Multi-scale Modeling of Hydrogen Embrittlement in High-Strength Steels
  54. Altmetric Badge
    Chapter 53 Electrochemical Characterization of Advanced High Strength Steel DP 780 MPa
  55. Altmetric Badge
    Chapter 54 High-Performance Amorphous Wire Magneto-Impedance Sensor for Biomagnetic Field Detection
  56. Altmetric Badge
    Chapter 55 A Study of Processing High-Grade Magnetite Concentrates by Combination of Magnetic Separation and Reverse Flotation Separation to Prepare Raw Materials for Ferrite Magnet
  57. Altmetric Badge
    Chapter 56 Electrochemical Polishing of Thin Metallic Glass Ribbons
  58. Altmetric Badge
    Chapter 57 Structure and Magnetic Properties of Novel High-Magnetization Fe–Mn Powders Synthesized by Hydrogen Reduction of Nanoferrites
  59. Altmetric Badge
    Chapter 58 Low-Temperature Synthesis of Superparamagnetic Fe 3 O 4 Morphologies Tuned Using Oleic Acid as Crystal Growth Modifiers
  60. Altmetric Badge
    Chapter 59 Preformed Oxide Scale Chemistry and Its Influence on Local Metal Loss During Dual Atmosphere Corrosion
  61. Altmetric Badge
    Chapter 60 Preparation of Macro Encapsulated Phase Change Materials for High Temperature Energy Storage Applications
  62. Altmetric Badge
    Chapter 61 Enhanced Stability of B-Site W Doped Pr 0.6 Sr 0.4 Fe 1-x W x O 3-δ Ceramic Membranes for Water Splitting
  63. Altmetric Badge
    Chapter 62 Fe 2 O 3 Nano-particles Grown on Carbon Fabric as a Freestanding Anode for High-Performance Lithium-Ion Batteries
  64. Altmetric Badge
    Chapter 63 Study on the Influence of Different Preheating Conditions on Carbon Structure of 1/3 Coking Coal
  65. Altmetric Badge
    Chapter 64 Synthesis of Nanoencapsulated Phase Change Materials with Ag Shell for Thermal Energy Storage
  66. Altmetric Badge
    Chapter 65 Bonding and High-Temperature Storage Performance of Die Attachment with Ag Paste Sintering on Bare Direct Bonding Aluminum (DBA) Substrate
  67. Altmetric Badge
    Chapter 66 Fatigue and Creep Properties of Sintered Ag Paste from Room Temperature to High Temperature
  68. Altmetric Badge
    Chapter 67 Reliability Behavior of Surface Mount Devices Assembled with Bismuth Bearing Low-Melt Solder Pastes
  69. Altmetric Badge
    Chapter 68 The Transition from Amorphous Carbon to Carbon Nanohorns by DC Arc Discharge
  70. Altmetric Badge
    Chapter 69 Design of Metallic Lattices for Bone Implants by Additive Manufacturing
  71. Altmetric Badge
    Chapter 70 Effects of Ti and Y Addition on the Scale Spalling Resistance of CoNiCrAl Alloys
  72. Altmetric Badge
    Chapter 71 Electroplating Powder for Cold Spray Applications
  73. Altmetric Badge
    Chapter 72 Investigation on the Laser Surface Treatment of Steel and Aluminum with a Single-Mode Pulsed Fiber Laser Source
  74. Altmetric Badge
    Chapter 73 On the Temperature Limits of Ni-Based Superalloys
  75. Altmetric Badge
    Chapter 74 Microstructure Evolution of the 410 Stainless Steel and Co-Based Alloy Dissimilar Welded Joint Manufactured by Electron Beam Welding
  76. Altmetric Badge
    Chapter 75 The Role of Microstructural Homogenization on Tensile and Stress-Rupture Behavior of Selective Laser Melted Nickel Based 718 Alloy
  77. Altmetric Badge
    Chapter 76 Development of an Evolutionary Deep Neural Net for Materials Research
  78. Altmetric Badge
    Chapter 77 An Improved Collocation Method to Treat Traction-Free Surfaces in Dislocation Dynamics Simulations
  79. Altmetric Badge
    Chapter 78 Simulation of Compressive Stress–Strain Curve for Additive Manufactured Ti6Al4V Cuboctahedron Cellular Structure
  80. Altmetric Badge
    Chapter 79 Molecular Mechanisms in Metal Oxide Nanoparticle Interactions with Biomolecules
  81. Altmetric Badge
    Chapter 80 Removal of Chromium (VI) from Water onto Activated Carbon by Adsorption in Dynamic Mode
  82. Altmetric Badge
    Chapter 81 Effect of Nanoclay Reinforcement on the Property of Rubber Seed Oil Polyurethane Nanocomposites
  83. Altmetric Badge
    Chapter 82 Characterization of Soft Actuation Through Ultrasonic Atomization
  84. Altmetric Badge
    Chapter 83 Active Metamaterial Skins for Friction Coefficient Control
  85. Altmetric Badge
    Chapter 84 The Effect of the Addition of Cobalt Powder on Compressive Properties of Porous Titanium as Bone Substitute Materials
  86. Altmetric Badge
    Chapter 85 Effect of Ni–Nb Metallic Glass on Moderating the Shock Damage in Crystalline Ni-Amorphous Ni 62 Nb 38 Nanocomposite Structure: A Molecular Dynamics Study
  87. Altmetric Badge
    Chapter 86 Estimating the Effect that Interactions Between Chemical Reactions and Environmental Influences Have on the Corrosivity of the Electrolyte
  88. Altmetric Badge
    Chapter 87 The Effect of Surface Treatment on the Performance of a Zirconium-Based Conversion Coating on AA7075 Automotive Alloys for Protection Against Filiform Corrosion
  89. Altmetric Badge
    Chapter 88 Cold Spray Coating for Corrosive Conditions
  90. Altmetric Badge
    Chapter 89 Corrosion Control by Using Zinc as Sacrificial Anode Cathodic Protection in Geopolymer Concrete
  91. Altmetric Badge
    Chapter 90 Corrosion Resistance and Electrochemical Corrosion Characteristics of Stainless Steel for Seawater Desalination Evaporator
  92. Altmetric Badge
    Chapter 91 Establishment of a Lead Loop Facility to Support Lead Cooled Fast Reactor Design
  93. Altmetric Badge
    Chapter 92 Analysis of Chemical Activity of Bismuthene in the Presence of Environment Gas Molecules by Means of Ab Initio Calculations
  94. Altmetric Badge
    Chapter 93 Molecular Dynamics Simulations of Phosphorus Migration in a Grain Boundary of α-Iron
  95. Altmetric Badge
    Chapter 94 Recent Development of Thermochimica for Simulations of Nuclear Materials
  96. Altmetric Badge
    Chapter 95 Development of a New Thermochemistry Solver for Multiphysics Simulations of Nuclear Materials
  97. Altmetric Badge
    Chapter 96 Experimental and Modeling Studies Using Fe 2 O 3 Doped Coke
  98. Altmetric Badge
    Chapter 97 Kinetic Monte Carlo Simulations of Effect of Grain Boundary Variability on Forming Times of RRAM Conductive Filaments
  99. Altmetric Badge
    Chapter 98 Kinetics of Scrap Melting in Iron–Carbon Bath
  100. Altmetric Badge
    Chapter 99 Mesoscopic Model of Free Surface Behaviour in the Continuous Casting Mold
  101. Altmetric Badge
    Chapter 100 Numerical Study of Raceway Shape and Size in a Model Blast Furnace
  102. Altmetric Badge
    Chapter 101 Reduction Kinetics Analysis of Fe 2 O 3 in the Case of Carbon Precipitation
  103. Altmetric Badge
    Chapter 102 An Experimental Characterization of Thermophysical Properties of a Porous Ceramic Shell Used in the Investment Casting Process
  104. Altmetric Badge
    Chapter 103 Defects Comparison Between Single- and Double-Sided Electron Beam Welded Dissimilar DP600 Steel to 5754 Al Alloy Joints: X-Ray Tomography Study
  105. Altmetric Badge
    Chapter 104 The Influence of Ultrasound on the Microstructure Formation during the Solidification of A356 Ingots Processed via a 2-Zone Induction Melting Furnace
  106. Altmetric Badge
    Chapter 105 An Investigation on Wear Properties of A390 Alloy by Rare Alloying Elements
  107. Altmetric Badge
    Chapter 106 How to Prevent Gas Porosity Defects in Castings of Stator Housing in Grey Cast Iron
  108. Altmetric Badge
    Chapter 107 Study on the Dendrite Arm Spacing of S50C Steel Produced by CSP
  109. Altmetric Badge
    Chapter 108 Multiphase Flow-Related Defects in Continuous Casting of Steel Slabs
  110. Altmetric Badge
    Chapter 109 Analysis of Solidification and Thermal-Mechanical Behaviors in Continuous Casting
  111. Altmetric Badge
    Chapter 110 Numerical Simulation of Macrosegregation Behavior of Billet During Continuous Casting
  112. Altmetric Badge
    Chapter 111 Component Analysis of Defects in Secondary Special Brass Alloy
  113. Altmetric Badge
    Chapter 112 Microstructure Evolution and Chemical Composition in Continuous Directional Solidification Cu–P–Sn Alloy
  114. Altmetric Badge
    Chapter 113 Stress Induced Fracture Transition in High-Temperature 9% Cr–CrMoV Dissimilar Welded Joint
  115. Altmetric Badge
    Chapter 114 Effective Copper Diffusion Coefficients in CuSO 4 –H 2 SO 4 Electrowinning Electrolytes
  116. Altmetric Badge
    Chapter 115 A 3-D Numerical Model to Predict Low Temperature Aluminum Electrochemical Process Using Ionic Liquids as Electrolytes at Different Boundary Conditions
  117. Altmetric Badge
    Chapter 116 Aluminum Extraction by Al–Si–Fe Alloy Electrolysis
  118. Altmetric Badge
    Chapter 117 Study on High-Temperature Liquid Lithium Battery with LiI–KI Electrolyte
  119. Altmetric Badge
    Chapter 118 Effects of Precursor Concentration on the Surface Morphology and Electrocatalytic Performance of Ti/IrO 2 –RuO 2 –SiO 2 Anode for Oxygen Evolution Reaction
  120. Altmetric Badge
    Chapter 119 Electrochemical Behavior of Fe 2 O 3 in Electro-Deoxygenation in NaCl–CaCl 2 Molten Salt System
  121. Altmetric Badge
    Chapter 120 Reduction Mechanism of Metal Cobalt from Cathode Material of Waste Lithium Cobalt Oxide Battery
  122. Altmetric Badge
    Chapter 121 Review on the Bio-oxidation of Pyrite: Implications for the Mining Industry
  123. Altmetric Badge
    Chapter 122 Corrosion and Protection (Conversion Coating and Plasma Electrolytic Oxidation) of Ti 6 Al 4 V Processed by Powder Bed Fusion—Additive Manufacturing. EIS Study
  124. Altmetric Badge
    Chapter 123 High Temperature Corrosion of Additively Manufactured Inconel 625
  125. Altmetric Badge
    Chapter 124 Comparative Assessment of the Fracture Behaviour of API-5L X65 and Micro-alloyed Steels in E80 Simulated Fuel Ethanol Environment
  126. Altmetric Badge
    Chapter 125 Comparison of Fracture Morphologies and Hydrogen States Present in the Vicinity of Fracture Surface Obtained by Different Methods of Evaluating Hydrogen Embrittlement of DP and TRIP Steels
  127. Altmetric Badge
    Chapter 126 Crack Initiation and Propagation Analyses of Hydrogen-Related Fracture Surfaces of Tempered Martensitic Steel
  128. Altmetric Badge
    Chapter 127 Determining Reliability Over Time for Stainless Steels Susceptible to Chloride-Induced Stress Corrosion Cracking
  129. Altmetric Badge
    Chapter 128 Effects of Chromium and Molybdenum on Hydrogen Absorption Behavior in Iron
  130. Altmetric Badge
    Chapter 129 Environmental Accelerated Deterioration Modeling of Large Glass Fiber-Reinforced Polymer Composite Structures/Systems
  131. Altmetric Badge
    Chapter 130 Fracture Failure Analysis on 20MnTiB Steel High-Strength Bolt Used in Bridges
  132. Altmetric Badge
    Chapter 131 Fracture Failure Analysis on 35VB Steel High-Strength Bolt Used in Bridge
  133. Altmetric Badge
    Chapter 132 Role of Chloride on the Fracture Behaviour of Micro-alloyed Steel in E20 Simulated Fuel Ethanol Environment
  134. Altmetric Badge
    Chapter 133 Stress Corrosion Cracking Behavior of Austenitic Stainless Steel SS304 for Dry Storage Canisters in Simulated Sea-Water
  135. Altmetric Badge
    Chapter 134 Assessing the Influence of Different Forging Process Parameters on the Local Fatigue Properties of a Precipitation Hardening Ferritic-Pearlitic Steel
  136. Altmetric Badge
    Chapter 135 Fatigue Behavior and Analysis of Heavy Duty Riveted Steel Grating
  137. Altmetric Badge
    Chapter 136 Fatigue Crack Growth Behavior in Al-7075 Under In-Plane Biaxial Loading with Mixed-Mode Overloads
  138. Altmetric Badge
    Chapter 137 Review of Surface Deformation Strengthening on the Fatigue Behavior of Metal Material
  139. Altmetric Badge
    Chapter 138 Computational Polyetheylene-Ceramic Composite Plate Design and Optimization
  140. Altmetric Badge
    Chapter 139 An Improved Fracture Mechanics-Informed Multiscale Thermomechanical Damage Model for Ceramic Matrix Composites
  141. Altmetric Badge
    Chapter 140 Mechanical Properties of Fibers Coated by Atomic Layer Deposition for Polymer-Matrix Composites with Enhanced Thermal and Ultraviolet Resistance
  142. Altmetric Badge
    Chapter 141 Novel VS 4 Nanorods Synthesized by a Facile Solvothermal Method for High Performance Electrochemical Capacitor Electrode
  143. Altmetric Badge
    Chapter 142 Fabrication of Bilayer Nanoporous Copper from Rapidly Solidified Al 70 Cu 30 Ribbons by Chemical Dealloying Technique
  144. Altmetric Badge
    Chapter 143 Study of pH Influence in the Synthesis of Copper Nanoparticles Using Ascorbic Acid as Reducing and Stabilizing Agent
  145. Altmetric Badge
    Chapter 144 An Investigation into the Link Between Microstructure and Pitting Corrosion of Novel Alloy FBB8+Ti
  146. Altmetric Badge
    Chapter 145 Evaluation of Microstructural and Mechanical Properties of Al x CrFeMnNi High Entropy Alloys
  147. Altmetric Badge
    Chapter 146 Fabrication and Hardness Behaviour of High Entropy Alloys
  148. Altmetric Badge
    Chapter 147 Preparation of CoCrFeNi High-Entropy Alloy via Electro-Deoxidation of Metal Oxides
  149. Altmetric Badge
    Chapter 148 Second Phase of 29Fe15Al18Cr27Ni High-Entropy Alloy
  150. Altmetric Badge
    Chapter 149 Data-Driven Hard-Magnetic Material Selection for AC Applications by Multiple Attribute Decision Making
  151. Altmetric Badge
    Chapter 150 Steel Development and Optimization Using Response Surface Models
  152. Altmetric Badge
    Chapter 151 Aeration Leaching Process for Producing Synthetic Rutile in a Novel Gas–Liquid–Solid Reactor
  153. Altmetric Badge
    Chapter 152 Cost-Effective PM Ti Compositions and Processing
  154. Altmetric Badge
    Chapter 153 Electrodeposition of Titanium Aluminide (TiAl) Alloy from AlCl 3 –BMIC Ionic Liquid at Low Temperature
  155. Altmetric Badge
    Chapter 154 Low Temperature Synthesis Method of TiH 2 Powder from TiCl 4 Reduction with MgH 2
  156. Altmetric Badge
    Chapter 155 Preparation of Ti-6Al-4V Alloy Powder by Aluminothermic Reduction
  157. Altmetric Badge
    Chapter 156 Deoxidation of TiAl Alloy Scraps with Metallic Yttrium and Calcium Fluoride Slag
  158. Altmetric Badge
    Chapter 157 Effect of Sintering Temperature on Mechanical and Tribological Behavior of Ti–Ni Alloy for Biomedical Applications
  159. Altmetric Badge
    Chapter 158 Numerical Prediction of Ductile Fracture in Bi-Axially Stretched Sheet Metal
  160. Altmetric Badge
    Chapter 159 Cathodic Behaviour of Moisture in LiCl–KCl Eutectic Melt: Applications to Pyroprocessing
  161. Altmetric Badge
    Chapter 160 Characterization of LiCl–KCl Eutectic and LiCl–KCl + H 2 O Mixtures Using Electrochemical Impedance Spectroscopy
  162. Altmetric Badge
    Chapter 161 Effect of Mn and Zn Inhibitors on the Corrosion of Incoloy 800H in the MgCl 2 –KCl Molten Salt
  163. Altmetric Badge
    Chapter 162 Effects of Bi on the Interface Layer Between Sn-Based Alloy and Cu Substrate Under Microgravity Conditions
  164. Altmetric Badge
    Chapter 163 Site Preference of the Alloying Additions on Mechanical Properties of L1 2 Ni 3 Co Alloys
  165. Altmetric Badge
    Chapter 164 Effects of Ge/Sb Intermixing on the Local Structures and Optical Properties of GeTe–Sb 2 Te 3 Superlattice
  166. Altmetric Badge
    Chapter 165 In-Situ X-Ray Diffraction Measurement During Deformation of Austenite Above the Ae 3 Temperature
  167. Altmetric Badge
    Chapter 166 Effect of Heat Treatments on Microstructures and Mechanical Properties of Ti-5553 Alloy
  168. Altmetric Badge
    Chapter 167 Precipitation Kinetics and Evaluation of the Interfacial Mobility of Precipitates in an AlSi 7 Cu 0.5 Mg 0.3 Cast Alloy
  169. Altmetric Badge
    Chapter 168 XRD and Synchrotron-Based XRD Study of Chalcopyrite Leaching Catalyzed by Silver Ions
  170. Altmetric Badge
    Chapter 169 The Validity of Additivity Rule for Pearlite Transformation in Eutectoid Steels
  171. Altmetric Badge
    Chapter 170 Carbon and Microstructure Effects on the Magnetic Properties of Fe–CN Soft Magnetic Materials (Minnealloy)
  172. Altmetric Badge
    Chapter 171 Carbonation Behavior of Calcium Aluminate Cements with Additions of Silica
  173. Altmetric Badge
    Chapter 172 Dilatometric Analysis of the Martensite Decomposition by Stages During Continuous Heating
  174. Altmetric Badge
    Chapter 173 Highly Enhanced Cross Tensile Strength of the Resistance Spot Welded Medium Manganese Steel by Optimized Post-heating Pulse
  175. Altmetric Badge
    Chapter 174 Preparation of Zinc Carbonate Hydroxide Microparticles via Deamination Precipitation by Heating
  176. Altmetric Badge
    Chapter 175 History of Inventions and Innovations for Aluminum Production
  177. Altmetric Badge
    Chapter 176 Trends and Challenges for Electrowinning of Aluminium and Magnesium from Molten Salt Electrolytes
  178. Altmetric Badge
    Chapter 177 Thermodynamic and Kinetic Modelling of Molten Oxide Electrolysis Cells
  179. Altmetric Badge
    Chapter 178 Screen Printing to 3D Printing of Solar Cells—An Overview
  180. Altmetric Badge
    Chapter 179 Formulation of UV Curable Resins Utilized in Vat Photo Polymerization for the Additive Manufacturing of Gun Propulsion Charge in 3D Printers (Update)
  181. Altmetric Badge
    Chapter 180 Relation Between Temperature Dependence of Gate Insulator and Magnetic Energy Effect of Thin Film Transistor Without Channel Layer
  182. Altmetric Badge
    Chapter 181 Printed Flexible Sensors Functionalized with TiO 2 Nanowires for Room Temperature CO 2 Gas Sensing
  183. Altmetric Badge
    Chapter 182 Advances in Dry Metal Forming Using Volatile Lubricants Injected Through Laser-Drilled Microholes
  184. Altmetric Badge
    Chapter 183 A Thermoelectrically Based Approach to Reduce Adhesive Wear During Blanking
  185. Altmetric Badge
    Chapter 184 Oxidation Kinetics of Palladium
  186. Altmetric Badge
    Chapter 185 Characterization of Rubber Seed Oil Modified for Biolubricant Feedstock Application
  187. Altmetric Badge
    Chapter 186 Development Status and Suggestions of Refractory Materials for Carbon Calcining Equipment
  188. Altmetric Badge
    Chapter 187 Preparation and Uniformity Analysis of Sol–Gel TiO 2 Thin Films
  189. Altmetric Badge
    Chapter 188 Dislocation-Based Thermodynamic Models of V-Pits Formation and Strain Relaxation in InGaN/GaN Epilayers on Si Substrates
  190. Altmetric Badge
    Chapter 189 Diffusion Bonding of AgC–Cu Bi-layered Electrical Contacts
  191. Altmetric Badge
    Chapter 190 Effect of Hydrogen Addition on the Diffusion Bonding Behavior of Titanium Alloys
  192. Altmetric Badge
    Chapter 191 Solid-State Diffusion Bonding of Glass-Metal for the International Thermonuclear Experimental Reactor (ITER) Diagnostic Windows
  193. Altmetric Badge
    Chapter 192 Solid State Diffusion Bonding of ODS Eurofer Steel by Spark Plasma Sintering
  194. Altmetric Badge
    Chapter 193 Deformation Mechanism and Mechanical Properties of Nano/Ultrafine Grained and Heterogeneous Fe–17Cr–6Ni Austenitic Steel
  195. Altmetric Badge
    Chapter 194 Effect of Severe Plastic Deformation on the Mechanical Properties of Al6061 Alloy
  196. Altmetric Badge
    Chapter 195 Enhanced Mechanical Properties of Nano/Ultrafine-Grained Structure Formed by Martensite Reversion in 18Cr–8Ni Austenitic Stainless Steel
  197. Altmetric Badge
    Chapter 196 In Situ Synchrotron X-Ray Diffraction Stress Analysis During Laser Surface Line Hardening of Samples with Specific Geometric Features
Attention for Chapter 146: Fabrication and Hardness Behaviour of High Entropy Alloys
Altmetric Badge

Mentioned by

twitter
8 X users

Citations

dimensions_citation
9 Dimensions

Readers on

mendeley
12 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Chapter title
Fabrication and Hardness Behaviour of High Entropy Alloys
Chapter number 146
Book title
TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings
Published by
Springer, Cham, January 2020
DOI 10.1007/978-3-030-36296-6_146
Book ISBNs
978-3-03-036295-9, 978-3-03-036296-6
Authors

Modupeola Dada, Patricia Popoola, Ntombi Mathe, Sisa Pityana, Samson Adeosun, Thabo Lengopeng, Dada, Modupeola, Popoola, Patricia, Mathe, Ntombi, Pityana, Sisa, Adeosun, Samson, Lengopeng, Thabo

X Demographics

X Demographics

The data shown below were collected from the profiles of 8 X users who shared this research output. Click here to find out more about how the information was compiled.
Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 12 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 12 100%

Demographic breakdown

Readers by professional status Count As %
Student > Ph. D. Student 3 25%
Professor > Associate Professor 3 25%
Researcher 1 8%
Student > Postgraduate 1 8%
Unknown 4 33%
Readers by discipline Count As %
Engineering 5 42%
Materials Science 2 17%
Agricultural and Biological Sciences 1 8%
Unknown 4 33%