Surface Properties of Temporary Soft Liners Modified by Minimum Inhibitory Concentrations of Antifungals

Mírian Galvão Bueno, Elen Juliana Bonassa de Sousa, Juliana Hotta, Vinícius Carvalho Porto, Vanessa Migliorini Urban, Karin Hermana Neppelenbroek

Evaluating the addition of minimum inhibitory concentrations (MICs) of antifungals for Candida albicans biofilm on the hardness and roughness of temporary denture soft liners. Specimens (n=8; 36×7×6 mm) of tissue conditioner (Softone) and resilient liner (Trusoft) were produced either without (control) or with incorporation of drugs at MICs: nystatin (0.032 g/mL), chlorhexidine diacetate (0.064 g/mL), ketoconazole (0.128 g/mL), miconazole (0.256 g/mL) and itraconazole (0.256 g/mL). Specimens were stored in distilled water at 37 °C for 24 h, 7 days and 14 days prior to the hardness/roughness measurements. Data were analyzed by 3-way ANOVA and Tukey HSD test (α=0.05). The addition of the antifungals into both materials demonstrated no evident hardness change or decrease of this property compared with the control, except for miconazole in Softone, which increased the hardness after 14 days (p=0.003). The addition of nystatin into both materials, chlorhexidine in Trusoft and ketoconazole in Softone resulted in no significant changes of roughness compared with the control, after 7 days and 14 days (p>0.05). In these periods, itraconazole increased the roughness of both materials (p<0.001). The addition of all antifungals, except for the miconazole in Softone, resulted in no deleterious effects on the materials' hardness over the evaluation time. The MICs of nystatin in both temporary soft lining materials, ketoconazole in Softone and chlorhexidine in Trusoft resulted in no deleterious effects for roughness up to 14 days.