↓ Skip to main content

Light Metals 2018

Overview of attention for book
Light Metals 2018
Springer International Publishing

Table of Contents

  1. Book Overview
  2. Chapter 1 Roasting Pretreatment-Low Temperature Digestion Method for Comprehensive Utilization of High-Sulfur Bauxite
  3. Chapter 2 Industrial Experience of New Sinter Hydro-chemical Processing Process at BAZ-SUAL
  4. Chapter 3 Effect of Sintering Conditions on the Stability of β-2CaO·SiO 2 in High Sodium Carbonate Solution
  5. Chapter 4 Research on Impurity Removal of Low Grade Bauxite
  6. Chapter 5 Study on the Structure and Generation Mechanism of Intermediate (6AlO–OH) in Decomposition Process of Sodium Aluminate Solutions
  7. Chapter 6 The Properties of Superfine ATH Precipitated by Carbonation Method
  8. Chapter 7 Effect of Organic Impurity on Seed Precipitation in Sodium Aluminate Solution
  9. Chapter 8 Fitness-for-Service Assessment and Re-rating of Flawed Alumina Feeding Vessels
  10. Chapter 9 Miniplant Tests of HCl Technology of Alumina Production
  11. Chapter 10 Development and Utilization of Detailed Process and Technology Models at RUSAL Alumina Refineries
  12. Chapter 11 Features of Pseudoboehmite from Alumina Production
  13. Chapter 12 Digital Transformation in Alumina Refining
  14. Chapter 13 Thermodynamics Analysis on Process of Pelletizing Chlorination of Fly Ash
  15. Chapter 14 Research on Alumina Preparation from Aluminium Chloride Solution by Electrolysis Process
  16. Chapter 15 How Digitalization Can Further Improve Plant Performance and Product Quality—Outotec Pretium Advisory Tool for Alumina Calcination
  17. Chapter 16 Experimental Investigation on Reduction of Cast Iron from Bayer Red Mud and Laterite Nickel
  18. Chapter 17 Analyzing the Bauxite Residue Amendment Through the Addition of Ca and Mg Hydroxides Followed by Carbonation
  19. Chapter 18 Comprehensive Utilization of Red Mud: Current Research Status and a Possible Way Forward for Non-hazardous Treatment
  20. Chapter 19 Alumina, Iron and Titanium Extracting from Bauxite Residue with Low Lime Sinter Method
  21. Chapter 20 Developing New Process for Selective Extraction of Rare Earth Elements from Bauxite Residue Based on Functionalized Ionic Liquids
  22. Chapter 21 Effects of Reductive Roasting with Sodium Salts on Leaching Behavior of Non-ferrous Elements in Bauxite Ore Residue
  23. Chapter 22 Specific Features of Scandium Behavior During Sodium Bicarbonate Digestion of Red Mud
  24. Chapter 23 Flotation Separation of Pyrite from Refractory High-Sulfur Bauxite
  25. Chapter 24 Research on the Desulfurization of High Sulfur Bauxite
  26. Chapter 25 Research on the Interaction Between 1-Butyl-2-Mercaptobenzimidazole and Pyrite
  27. Chapter 26 Flotation of Low-Grade Bauxite Using Modified Humics as Depressant
  28. Chapter 27 Research on the Adsorption of Humic Acid on Pyrite Surface
  29. Chapter 28 Experimental Investigation on Desiliconization of Low-Grade Bauxite by Flotation Process
  30. Chapter 29 The Impact of Backwater Iron Ions on Bauxite Flotation
  31. Chapter 30 Grain Boundary Precipitation and Fracture Behavior of Al–Cu–Li Alloys
  32. Chapter 31 Comparison of Texture and Surface Finish Evolution During Single Point Incremental Forming and Formability Testing of AA 7075
  33. Chapter 32 Understanding the Co-precipitation Mechanisms of Al 3 (Sc, Zr) with Strengthening Phases in Al–Cu–Li Model Alloys
  34. Chapter 33 Determining a Retrogression Heat Treatment to Apply During Warm Forming of a High Strength Aluminum AA7075 Sheet Material
  35. Chapter 34 Development of High-Strength and High-Electrical-Conductivity Aluminum Alloys for Power Transmission Conductors
  36. Chapter 35 The Combined Effects of Sr Additions and Heat Treatment on the Microstructure and Mechanical Properties of High Pressure Die Cast A383 Alloy
  37. Chapter 36 Influence of Additional Elements (Si, Ti and B) on the Castability, Corrosion and Mechanical Properties of A201 Alloys
  38. Chapter 37 Effect of Ni Addition on the Solidification Process and Microstructure of Al-12%Si-4%Cu-1.2%Mn-x%Ni Heat-Resistant Alloys
  39. Chapter 38 Phase Formation of Monotectic Al–In and Al–Ga–In Alloys and Implications Thereof
  40. Chapter 39 Investigations on Pb-Free 6000 Series Aluminum Alloy for Machining Applications
  41. Chapter 40 Optimization in Novel Partial-Solid High Pressure Aluminum Die Casting by Taguchi Method
  42. Chapter 41 Application of the Hot Stamping Process to Aluminum Alloy Structural Components
  43. Chapter 42 Failure of 5000 and 6000 Series Aluminum Alloys in Modular Wastewater Treatment Aeration Tanks
  44. Chapter 43 Grain Refinement of Al–Si–Mg Cast Alloys by Al3Ti3B Master Alloy
  45. Chapter 44 Improving Bendability of Al–Mg–Si Alloy Sheet by Minor Alloying Element Addition
  46. Chapter 45 Deep Drawing and Anodizing Quality Improvement in AA3003-O Alloy by Optimization of Homogenization, Rolling and Annealing
  47. Chapter 46 Understanding Large-Strain Softening of Aluminum in Shear at Elevated Temperatures
  48. Chapter 47 Assessments of Sc-Containing Ternary Systems Al–Sc–Ti and Al–Sc–Zr Within the Thermodynamic Database for Aluminium Alloys, TCAL5
  49. Chapter 48 Multiscale Model for Al–Li Material Processing Simulation Under Forging Conditions
  50. Chapter 49 Investigation of Effect of Aging Treatment on Deformation Behavior of Al–Mg–Si Alloy Using Quasi-2D Polycrystalline Sample
  51. Chapter 50 Development of Innovative Al–Si–Mn–Mg Alloys with High Mechanical Properties
  52. Chapter 51 A General Formulation of Eutectic Silicon Morphology and Processing History
  53. Chapter 52 Evaluation of Hot Tearing Susceptibility of 6000 Series Aluminum Alloys Using Constrained Solidification Test
  54. Chapter 53 In-Situ Fitness-for-Service Assessment of Aluminum Alloys Developed for Automotive Powertrain Lightweighting
  55. Chapter 54 Research on the Effect of the Processing Parameters on Susceptibility of Liquation Cracking of Al Alloys During Refilled Friction Stir Spot Welding
  56. Chapter 55 Factors Influencing the Cast Duration of Horizontal Continuous Ingot Casters
  57. Chapter 56 On Si Redistribution During Friction Stir Processing of Cast Al-7%Si–0.4%Mg Alloys
  58. Chapter 57 Equal Channel Angular Pressing of a Newly Developed Precipitation Hardenable Scandium Containing Aluminum Alloy
  59. Chapter 58 Stiffness Improvement Through Alloying Elements in Al Alloys
  60. Chapter 59 Formation Mechanism of Surface Segregation in Heated Mold Continuous Casting Al–Cu Alloy
  61. Chapter 60 Effects of Rare Earth Er Additions on Microstructure and Mechanical Properties of an Al–Zn–Mg–Cu Alloy
  62. Chapter 61 Effects of Extrusion and Heat Treatment Conditions on Microstructure and Mechanical Properties of an Al–Zn–Mg–Cu–Er Alloy
  63. Chapter 62 Maximizing Previous Pot Design to Have Higher Capacity
  64. Chapter 63 On the Use of Multivariate Statistical Methods to Detect, Diagnose and Mitigate Abnormal Events in Aluminium Smelters
  65. Chapter 64 Spike Detection Using Advanced Analytics and Data Analysis
  66. Chapter 65 Speed, Agility and Simplicity (SAS) Recovery of Reduction Line-5 in Alba
  67. Chapter 66 Partial Repair and Restart of a Damaged Aluminium Reduction Cell
  68. Chapter 67 Discussion on Alumina Dissolution and Diffusion in Commercial Aluminum Reduction Cell
  69. Chapter 68 Investigation of Alumina Concentration Gradients Within Hall-Héroult Electrolytic Bath
  70. Chapter 69 Study of Alumina Dissolution in Cryolitic Bath to the Vertical Soderberg (VSS) Aluminum Production Process
  71. Chapter 70 Impacts of Sodium on Alumina Quality and Consequences for Current Efficiency
  72. Chapter 71 Alucell: A Unique Suite of Models to Optimize Pot Design and Performance
  73. Chapter 72 Anode Bottom Burnout Shape and Velocity Field Investigation in a High Amperage Electrolysis Cell
  74. Chapter 73 CFD Modelling of Alumina Feeding
  75. Chapter 74 Effect of Steel Multi-collector Bars on Current Density and Magnetohydrodynamic Stability in an Aluminum Reduction Cell
  76. Chapter 75 Numerical Simulation Study on Gas Collecting System of 400 kA Grade Aluminum Electrolytic Cell
  77. Chapter 76 Study on 3D Full Cell Ledge Shape Calculation and Optimal Design Criteria by Coupled Thermo-Flow Model
  78. Chapter 77 The Successful Implementation of Energy Saving Technology Based on Steady Flow and Heat Preservation
  79. Chapter 78 Current Efficiency in Hall-Héroult Cells: The Role of Mass Transfer at the Cathode
  80. Chapter 79 Effects of Current Density on Current Efficiency in Low Temperature Electrolysis with Vertical Electrode Structure
  81. Chapter 80 Relationship Between Aluminium Electrolysis Current Efficiency and Operating Condition in Electrolyte Containing High Concentration of Li and K
  82. Chapter 81 Evaluating Effects of Future Shared Mobility and Electrification Trends on Key Intermediate Indicator of Aluminum Transportation Demand: US Vehicle Fleet Size
  83. Chapter 82 Improvement in Smelter Process Analysis Through EGA Lab Modernization
  84. Chapter 83 Two-Stage Pot Gas Treatment Technology Allowing the Production of Sodium Sulfate
  85. Chapter 84 Improved Abart Gas Treatment and Alumina Handling at the Karmøy Technology Pilot
  86. Chapter 85 Alternative Roof-Vent Emission Monitoring Method
  87. Chapter 86 SPL: An Update
  88. Chapter 87 Bubble Dispersion States in the Zinc Oxide Desulfurization Injection Blow Tank
  89. Chapter 88 Decision Criteria for Pneumatic Conveying and Distribution of Material
  90. Chapter 89 Very Low Energy Consumption Cell Designs: The Cell Heat Balance Challenge
  91. Chapter 90 APXe Cell Technology: 7 Years of Low Energy Operation
  92. Chapter 91 Development and Industrial Application of NEUI600 High Efficiency Aluminum Reduction Cell
  93. Chapter 92 RA-550 Cell Technology: UC RUSAL’s New Stage of Technology Development
  94. Chapter 93 DX+ Ultra Industrial Version: Preheat Start Up and Early Operation
  95. Chapter 94 Selecting Technology for Achieving 300,000 T/Year—Why Do We Need to Compete Pot Technology?
  96. Chapter 95 AP44 Development at Alma
  97. Chapter 96 EGA New D20+ Technology with Reduced Energy Consumption
  98. Chapter 97 Potline Start Up Without Anode Effect Frequency
  99. Chapter 98 Thermo-electrical Modeling of an Aluminum Reduction Cell
  100. Chapter 99 Restarting Electrochemical Cell with Cold Metal (D18 Cell)
  101. Chapter 100 Root Cause Analysis Findings of a Force 3 Explosion
  102. Chapter 101 Condensation Warning System for Dry Material Storage
  103. Chapter 102 ACS/Aluminium Crucible Skimmer
  104. Chapter 103 Drive-In Feeding of Crucibles for Casting Machine
  105. Chapter 104 In-line Salt Fluxing Process With an FFD™
  106. Chapter 105 The “Alcoa Filter System AFS”: A Cost Effective Solution for Enhanced CFF Performance
  107. Chapter 106 Continuous Centrifugal Casting: A Revolutionary Process for Casting Aluminium Tubes
  108. Chapter 107 Development of a Prototype Unit for Continuous Centrifugal Casting of Aluminum Tubes
  109. Chapter 108 Constellium’s R&D on the Use of Power Ultrasound in Liquid Aluminium: An Overview
  110. Chapter 109 Molten Metal Cleanliness: Recent Developments to Improve Measurement Reliability
  111. Chapter 110 On-site Benchmarking of LiMCA III Versus LiMCA II for Monitoring of Non-metallic Inclusions in Liquid Aluminium
  112. Chapter 111 Discussion of Bi-Film Index and LiMCA Data in Industrial Aluminum Remelting Trials
  113. Chapter 112 Inclusion Composition Determination by in-Line LIBS Measurement—Plant Assessment
  114. Chapter 113 An Innovative Ultrasonic Technology for the Continuous Quality Monitoring of Liquid Aluminum on Casting Lines
  115. Chapter 114 Ultrasonic Doppler Velocimetry in Liquid Aluminum
  116. Chapter 115 Nitridation Reaction of Aluminum and Magnesium in 5XXX Series Aluminum Alloy
  117. Chapter 116 Experimental Study and Numerical Analysis of Cracking During DC Casting of Large Dimension 7075 Aluminium Billets
  118. Chapter 117 The Benefits of Ultrasonic Treatment of Molten Metal for Slabs Casting at UC RUSAL Facilities
  119. Chapter 118 Effect of Ultrasonic Melt-Treatment and Cooling Rate on Microstructure of Multi-phase Reinforced Al Alloy
  120. Chapter 119 XPS Examination of the Oxide-Metal Interface of an Aluminum–Magnesium Alloy Containing Beryllium
  121. Chapter 120 Innovative Technology for a Flawless Rolling Slab Casting Process
  122. Chapter 121 Robustness of Forged Part Mechanical Properties to Casting, Forging and Heat Treating Process Variation
  123. Chapter 122 Analysis of Laser Marking Performance on Various Non-ferrous Metals
  124. Chapter 123 Continuous Casted Aluminum Flat Products Corrosion Characteristic According to Downstream Process
  125. Chapter 124 Controlling the Microstructural Evolution During Soft Annealing of Cold Rolled Twin-Roll Cast AlMnMg Alloys by Homogenization Heat Treatment
  126. Chapter 125 Investigation of Elemental Distribution in the Sheet Sections After Aluminum Continuous Sheet Casting, Cold Rolling and Heat Treatment Processes
  127. Chapter 126 Tailoring the Materials Properties with a Holistic Approach from Casting to Back Annealing
  128. Chapter 127 Study of the Effect of Surface—Roughness of Dies and Tooling for HPDC on Soldering
  129. Chapter 128 Electrochemical Characterization of Al–Li–Cu–Mg Alloys
  130. Chapter 129 Shaping the Mechanical Properties of AlSi30 Alloy Cast by Rapid Solidification
  131. Chapter 130 Productivity and Energy Efficiency Improvements at Two Reverberatory Furnaces at Alcoa, Norway
  132. Chapter 131 The Application of ALTEK Stirring Technology to a 90MT Melting Furnace at ALCOA Moesjen, Norway
  133. Chapter 132 Case Study of Air Cooled Electromagnetic Stirred Melting Furnace at Hydro Henderson
  134. Chapter 133 Efficiency of the Casting Process Starts in the Melt Shop
  135. Chapter 134 Praxair’s OPTIVIEW TM Image Analysis System for Enhanced Combustion Control on Aluminum Tilting Rotary Furnace
  136. Chapter 135 Aluminum Melting Furnace Pressure Control
  137. Chapter 136 Resource Efficiency Analysis of High Pressure Die Casting Process
  138. Chapter 137 Gas Fired Holding Furnace Modeling for Efficient Operation
  139. Chapter 138 In Situ Study of Solidification Kinetics of Al–Cu and Al–Ce–Mg Alloys with Application of Neutron Diffraction
  140. Chapter 139 Quantifying the Effects of Grain Refiner Addition on the Solidification of Fe-Rich Intermetallics in Al–Si–Cu Alloys Using In Situ Synchrotron X-Ray Tomography
  141. Chapter 140 An Investigation on Si Refinement Mechanism of Hypereutectic Al-Si via Applying Ultrasonic Vibrations
  142. Chapter 141 Observations of Microhardness and Evolution of Constituents in Al–Zn and Zn–Al Specimens with Columnar-to-Equiaxed Grain Transition
  143. Chapter 142 Impact of Inlet Flow on Macrosegregation Formation Accounting for Grain Motion and Morphology Evolution in DC Casting of Aluminium
  144. Chapter 143 Effects of Microstructure on Hot Cracking Behavior in Al–Zn–Mg–Cu Alloys
  145. Chapter 144 Effective Nanoparticles Feeding Treatment in Casting of A356/ZrO 2 Nano-reinforced Composite
  146. Chapter 145 Recycling of Oxide from Dross into Aluminum Electrolysis Cells
  147. Chapter 146 Behavior of Mg–Si-Rich Phases in Aluminum Can Sheets and Their Impact on Metal Oxidation During Industrial Thermal Pre-treatment
  148. Chapter 147 Potential for Handheld Analyzers to Address Emerging Positive Material Identification (PMI) Challenges
  149. Chapter 148 Dissipative Use of Critical Metals in the Aluminum Industry
  150. Chapter 149 In Situ Observation of Dross Formation During Melting of Al–Mg Alloy
  151. Chapter 150 The Implementation of a Comprehensive Dross Management Program at Constellium Ravenswood
  152. Chapter 151 Environmental Impacts of Aluminum Dross After Metal Extraction
  153. Chapter 152 Promotion of Separation of Two-Phase Liquid Metals by Applying Mechanical Vibration
  154. Chapter 153 Influence of Crushing Technology and Particle Shape on the Bulk Density of Anode Grade Petroleum Coke
  155. Chapter 154 Study on the Calcination Performance and Desulfurization Mechanism of Petroleum Cokes with Different Sulfur Contents Between 700 and 1100 °C
  156. Chapter 155 Rotary Hearth Calcining of Petroleum Cokes
  157. Chapter 156 Effects of High-Sulfur Cokes on Physicochemical Properties of Prebaked Anodes in Aluminium Electrolysis
  158. Chapter 157 The Research and Industrial Application of an Improved Impact Cleaning Technology of the Double Anode Butts in Aluminium Electrolysis
  159. Chapter 158 Analysis of Material Balance Based on the Calcination Performance of a Chamber Calciner
  160. Chapter 159 Formation of Aluminium Carbide in Hall-Héroult Electrolysis Cell Environments
  161. Chapter 160 The Research and Trial of the Aluminum Electrolysis Cells with Current Out from the Bottom
  162. Chapter 161 Laboratory Study of the Impact of the Cathode Grade on the Formation of Deposits on the Cathode Surface in Hall-Héroult Cells
  163. Chapter 162 Understanding the Anode Porosity as a Means for Improved Aluminium Smelting
  164. Chapter 163 Effect of Changes in Anode Top Cover Composition on Anode Butt Quality
  165. Chapter 164 Inert Anodes—the Blind Alley to Environmental Friendliness?
  166. Chapter 165 Role of the Porosity of Carbon Anodes in the Nucleation and Growth of Gas Bubbles
  167. Chapter 166 Challenges and Successes of Conducting Trials for Anode Design Modification
  168. Chapter 167 Study on Optimization of Anode Structure for Aluminum Reduction Cell
  169. Chapter 168 Effect of Cover Material on the Oxidation Speed of Prebaked Anodes
  170. Chapter 169 Interaction Between Anode Aggregate and Binder in the Sessile Drop Wetting Test
  171. Chapter 170 Development and Application of Large-Scale Shaft Kilns
  172. Chapter 171 Study on the Property and Desulfurization Mechanisms of Petroleum Cokes with Different Sulfur Contents from 1200 to 2800 °C
  173. Chapter 172 The Current Status and Development Trend of the Prebaked Anode Market in China
  174. Chapter 173 Transport of Sodium in TiB 2 Materials Investigated by a Laboratory Test and DFT Calculations
  175. Chapter 174 Multi-scale Modelling of Titanium Diboride Degradation Using Crystal Elasticity Model and Density Functional Theory
  176. Chapter 175 Simulation on the Initial Stage of Sodium–Graphite Intercalation Using First-Principles Calculation
  177. Chapter 176 Cathode Structure Optimization Research for Aluminum Reduction Cell
  178. Chapter 177 Research on the Penetration of a Potassium-Based Electrolyte into Dry Barrier Materials
  179. Chapter 178 Development and Application of Electrocalciners with Increased Calcination Temperature
  180. Chapter 179 3D Transient Modelling of a Complete Fire Line for Anode Baking Furnace Design and Optimization
  181. Chapter 180 A Study of Anode Baking Gas Composition
  182. Chapter 181 Improved Compaction Method for the Production of Large Scale Anode Paste Samples for Thermomechanical Characterization
  183. Chapter 182 Systemic Analysis for the Selection of Anode Baking Furnace Refractories
  184. Chapter 183 Numerical Investigation of the Thermomechanical Behaviour of Anode Butt
  185. Chapter 184 Method of Defining the Degree of Impregnation of the Dry Aggregate with Pitch in the Process of Anode Production
  186. Chapter 185 Research and Application for Large Scale, High Efficiency and Energy Saving Baking Furnace Technology
  187. Chapter 186 Opportunities and Challenges Associated to Green Anode Plant Upgrade For Smelter Amperage Creeping
  188. Chapter 187 Conditions and Mechanisms of Gas Emissions from Didymium Electrolysis and Its Process Control
  189. Chapter 188 Perfluorocarbon Formation During Rare Earth Electrolysis
  190. Chapter 189 PFC Evolution Characteristics During Aluminium and Rare Earth Electrolysis
  191. Chapter 190 Evaluation of Time Consistency When Quantifying Emissions of Perfluorocarbons Resulting from Low Voltage Anode Effects
  192. Chapter 191 Low Voltage PFC Measurements and Potential Alternative to Reduce Them at Alcoa Smelters
  193. Chapter 192 New Approach for Quantification of Perfluorocarbons Resulting from High Voltage Anode Effects
  194. Chapter 193 New Algorithm for Calculating CF 4 Emissions from High Voltage Anode Effects
  195. Chapter 194 Validation of Online Monitoring of PFC by QCL with FTIR Spectroscopy
  196. Chapter 195 PFC Emission Reduction in the Semiconductor Industry
  197. Chapter 196 Challenges in Estimating Global CF 4 and C 2 F 6 Emissions
  198. Chapter 197 An Estimation of PFC Emission by Rare Earth Electrolysis
  199. Chapter 198 Updated Factors for Calculating PFC Emissions from Primary Aluminum Production
  200. Chapter 199 PFCs from the Chinese Aluminium Sector—Challenges in Emissions Accounting and Further Characteristics
  201. Chapter 200 Scandium Recovery from the Nyngan Laterite Project in NSW
  202. Chapter 201 Extraction of Scandium from Lateritic Nickel-Cobalt Ore Leach Solution by Ion Exchange: A Special Study and Literature Review on Previous Works
  203. Chapter 202 Electrochemical Formation of Alloys of Scandium in Molten Salts
  204. Chapter 203 Direct Method for Producing Scandium Metal and Scandium-Aluminium Intermetallic Compounds from the Oxides
  205. Chapter 204 Sc Applications in Aluminum Alloys: Overview of Russian Research in the 20th Century
  206. Chapter 205 Effect of Treatment Parameters on Structure, Mechanical and Corrosion Properties of Al-Mg-Sc Alloy Forgings with Reduced Concentration of Scandium
  207. Chapter 206 Mechanical Properties and Applications of Aluminum Scandium Alloys at Elevated Temperatures
  208. Chapter 207 Scandium-Enriched Nanoprecipitates in Aluminum Providing Enhanced Coarsening and Creep Resistance
  209. Chapter 208 The Effect of Scandium and Zirconium on the Microstructure, Mechanical Properties and Formability of a Model Al–Cu Alloy
  210. Chapter 209 Influence of the Al 3 (Sc,Zr) Dispersoids and the Stretching on the Natural Ageing Behavior of a Binary Al-4 wt%Cu Alloys
  211. Chapter 210 Design and Processing Conditions of Hypoeutectic Al–Cu–Sc Alloys for Maximum Benefit of Scandium
  212. Chapter 211 Erratum to: Light Metals 2018
Attention for Chapter 199: PFCs from the Chinese Aluminium Sector—Challenges in Emissions Accounting and Further Characteristics

Mentioned by

news
1 news outlet

Readers on

mendeley
4 Mendeley