Superalloys 2012

Table of Contents

1. Altmetric Badge
   Book Overview
2. Altmetric Badge
   Chapter 1 Application of Materials and Process Modeling to the Design, Development, and Sustainment of Advanced Turbine Engines
3. Altmetric Badge
   Chapter 2 Mechanical Behavior and Damage Processes of Udimet 720Li: Influence of Localized Plasticity at Grain Boundaries
4. Altmetric Badge
   Chapter 3 Deformation Mechanisms Coupled with Phase Field and Crystal Plasticity Modeling in a High-Temperature Polycrystalline Ni-Based Superalloy
5. Altmetric Badge
   Chapter 4 Controlling the Deformation Mechanism in Disk Superalloy at Low and Intermediate Temperatures
6. Altmetric Badge
   Chapter 5 Characterization of Strain Accumulation at Grain Boundaries of Nickel-Based Superalloys
7. Altmetric Badge
   Chapter 6 On the Mechanism of Serrated Grain Boundary Formation in Ni-Based Superalloys with Low γ′ Volume Fraction
8. Altmetric Badge
   Chapter 7 Fatigue Failure Modes of the Grain Size Transition Zone in a Dual Microstructure Disk
9. Altmetric Badge
   Chapter 8 Understanding and Modeling of Grain Boundary Pinning in Inconel 718
10. Altmetric Badge
    Chapter 9 Nanoindentation and Nano-Compresion Testing of Ni 3 Al Precipitates
11. Altmetric Badge
    Chapter 10 Local Fracture Toughness and Residual Stress Measurements on NiAl Bond Coats by Micro Cantilever and FIB Based Bar Milling Tests
12. Altmetric Badge
    Chapter 11 The Localization of Strain in Low Solvus High Refractory (LSHR) Nickel Superalloy
13. Altmetric Badge
    Chapter 12 Coupled Analysis of Microstructure Evolution with Creep Deformation in Nickel-Based Superalloys by the Phase Field Method
14. Altmetric Badge
    Chapter 13 New Quantitative Analysis of Contributing Factors to Strength of Disk Superalloys
15. Altmetric Badge
    Chapter 14 Integration and Automation of Residual Stress and Service Stress Modeling for Superalloy Component Design
16. Altmetric Badge
    Chapter 15 Structural Stability of Topologically Close-Packed Phases: Understanding Experimental Trends in Terms of the Electronic Structure
17. Altmetric Badge
    Chapter 16 The Variability of Fatigue in Notched Bars of IN100
18. Altmetric Badge
    Chapter 17 Grain Boundary Deformation and Fracture Mechanisms in Dwell Fatigue Crack Growth in Turbine Disk Superalloy ME3
19. Altmetric Badge
    Chapter 18 Grain Scale Crystal Plasticity Model with Slip and Microtwinning for a Third Generation Ni-Base Disk Alloy
20. Altmetric Badge
    Chapter 19 Influence of γ′ Precipitate Size and Distribution on LCF Behavior of a PM Disk Superalloy
21. Altmetric Badge
    Chapter 20 New Single Crystal Superalloys, CMSX ® -7 and CMSX ® -8
22. Altmetric Badge
    Chapter 21 Development of an Oxidation-Resistant High-Strength Sixth-Generation Single-Crystal Superalloy TMS-238
23. Altmetric Badge
    Chapter 22 A New Single Crystal Superalloy for Power Generation Applications
24. Altmetric Badge
    Chapter 23 Influence of Ruthenium on Topologically Close Packed Phase Precipitation in Single-Crystal Ni-Based Superalloys: Numerical Experiments and Validation
25. Altmetric Badge
    Chapter 24 Deformation and Damage Mechanisms during Thermomechanical Fatigue of a Single-Crystal Superalloy in the <001> and <011> Directions
26. Altmetric Badge
    Chapter 25 The Effect of Crystal Orientation and Temperature on Fatigue Crack Growth of Ni-Based Single Crystal Superalloy
27. Altmetric Badge
    Chapter 26 Comparison of the Mechanical Behavior and Evaluation of Different Damage Mechanisms in an Equiaxed and a Single Crystal Superalloys Subjected to Creep LCF and TMF
28. Altmetric Badge
    Chapter 27 Microstructural Evolution of Single Crystal and Directionally Solidified Rejuvenated Nickel Superalloys
29. Altmetric Badge
    Chapter 28 Development of Ni-Based DS Superalloy with Excellent Oxidation Resistance and LCF Properties for Power-Generation Gas Turbines
30. Altmetric Badge
    Chapter 29 Effect of the Prior Microstructure Degradation on the High Temperature/Low Stress Non-Isothermal Creep Behavior of CMSX-4® Ni-Based Single Crystal Superalloy
31. Altmetric Badge
    Chapter 30 A Proposal on Quantitative Treatment of Multiple Cracks Nucleating in Single Crystal Superalloys
32. Altmetric Badge
    Chapter 31 Quantitative Analysis of Creep Strengthening Factors in Ni-Base Single Crystal Superalloys
33. Altmetric Badge
    Chapter 32 Low Cycle Fatigue of CMSX-4 in Off-Axis Orientations and the Effect of a Multi-Axial Stress State
34. Altmetric Badge
    Chapter 33 Superalloys 2012
35. Altmetric Badge
    Chapter 34 Influence of Crystallographic Orientation on Creep Behavior of Aluminized Ni-Base Single Crystal Superalloys
36. Altmetric Badge
    Chapter 35 Prediction of Initial Oxidation Behavior of Ni-Base Single Crystal Superalloys: A New Oxidation Map and Regression Analysis
37. Altmetric Badge
    Chapter 36 Modeling of the Influence of Oxidation on Thin-Walled Specimens of Single Crystal Superalloys
38. Altmetric Badge
    Chapter 37 Rejuvenation of Nickel-Based Superalloys GTD444(DS) and René N5(SX)
39. Altmetric Badge
    Chapter 38 Stress Rupture and Fatigue in Thin Wall Single Crystal Superalloys with Cooling Holes
40. Altmetric Badge
    Chapter 39 Evolution of Grain Boundary Precipitates in a Directionally Solidified Ni-Base Superalloy during High Temperature Creep
41. Altmetric Badge
    Chapter 40 Thermomechanical Fatigue of Single-Crystal Superalloys: Influence of Composition and Microstructure
42. Altmetric Badge
    Chapter 41 Processing to Fatigue Properties: Benefits of High Gradient Casting for Single Crystal Airfoils
43. Altmetric Badge
    Chapter 42 Secondary Creep of Thin-Walled Specimens Affected by Oxidation
44. Altmetric Badge
    Chapter 43 Sustained Macroscopic Deflected Fatigue Crack Growth in Nickel Based Superalloy 720Li
45. Altmetric Badge
    Chapter 44 Analysis of Deformation Substructures in a Notched LCF Sample under Dwell Condition in a Ni-Based Superalloy
46. Altmetric Badge
    Chapter 45 Effect of Thermal Cycling on High Temperature Creep of Coated CMSX-4
47. Altmetric Badge
    Chapter 46 Relative Contributions of Secondary and Tertiary γ′ Precipitates to Intergranular Crack Growth Resistance in IN100 Alloy
48. Altmetric Badge
    Chapter 47 Fatigue Crack Propagation in Thin-Wall Superalloys Component; Experimental Investigation via Miniature CT Specimen
49. Altmetric Badge
    Chapter 48 An Analysis of Fatigue Crack Initiation using 2D Orientation Mapping and Full-Field Simulation of Elastic Stress Response
50. Altmetric Badge
    Chapter 49 Specific Failures of Superalloys with Thermal Barrier Coatings Subjected to Thermo-Mechanical Fatigue Loadings with a Thermal Gradient in a Simulated Combustion Environment
51. Altmetric Badge
    Chapter 50 Effects of Alloying Elements on Elastic, Stacking Fault, and Diffusion Properties of Fcc Ni from First-Principles: Implications for Tailoring the Creep Rate of Ni-Base Superalloys
52. Altmetric Badge
    Chapter 51 The Effect of Carbide Decomposition and Reformation on Rupture Lives of IN738LC during Multiple Reheat Treatment and Degradation Cycles
53. Altmetric Badge
    Chapter 52 A New Approach to Modeling of Creep in Superalloys
54. Altmetric Badge
    Chapter 53 Physics-Based Modeling of Thermo-Mechanical Fatigue in PWA 1484
55. Altmetric Badge
    Chapter 54 Rafting during High Temperature Deformation in a Single Crystal Superalloy: Experiments and Modeling
56. Altmetric Badge
    Chapter 55 Cyclic Dwell Fatigue Behaviour of Single Crystal Ni-Base Superalloys with/without Rhenium
57. Altmetric Badge
    Chapter 56 Direct Laser Fabrication of Inconel-718: Effects on Distortion and Microstructure
58. Altmetric Badge
    Chapter 57 Effect of Off-Stoichiometry and Ternary Additions on Planar Fault Energies in Ni 3 Al
59. Altmetric Badge
    Chapter 58 Interfaces in Ni-Based Superalloys and Implications for Mechanical Behavior and Environmental Embrittlement: A First-Principles Study
60. Altmetric Badge
    Chapter 59 Molecular-Dynamics Simulations of Molten Ni-Based Superalloys
61. Altmetric Badge
    Chapter 60 Prediction of Plastic Strain for Recrystallisation during Investment Casting of Single Crystal Superalloys
62. Altmetric Badge
    Chapter 61 Progress of Research on P/M and Spray-Formed Superalloy in ISCPM, USTB
63. Altmetric Badge
    Chapter 62 Weld Solidification Behavior of Ni-Base Superalloys for use in Advanced Supercritical Coal-Fired Power Plants
64. Altmetric Badge
    Chapter 63 Sputtered Ni-Base Superalloys for Microscale Devices
65. Altmetric Badge
    Chapter 64 Laser Powder Bed Fabrication of Nickel-Base Superalloys: Influence of Parameters; Characterisation, Quantification and Mitigation of Cracking
66. Altmetric Badge
    Chapter 65 On Liquation and Liquid Phase Oxidation during Linear Friction Welding of Nickel-Base IN738 and CMSX Superalloys
67. Altmetric Badge
    Chapter 66 Microstructure Development during Controlled Directional Solidification in Alloy 718
68. Altmetric Badge
    Chapter 67 Numerical Simulation of Microstructure Formation during Solidification and Heat Treatments of Ni-Base Superalloys
69. Altmetric Badge
    Chapter 68 Effects of Hammer Peening and Aging Treatment on Microstructure, Mechanical Properties and Corrosion Resistance of Oil-Grade Alloy 718
70. Altmetric Badge
    Chapter 69 Superalloys 2012
71. Altmetric Badge
    Chapter 70 A Closed Concept to Associate the Hot-Forging Process Controlled Microstructure with Fatigue Life
72. Altmetric Badge
    Chapter 71 Polycrystalline γ(Ni)/γ′ (Ni 3 A1)-δ(Ni 3 Nb) Eutectic Ni-Base Superalloys: Chemistry, Solidification and Microstructure
73. Altmetric Badge
    Chapter 72 Two Integrated Experimental and Modeling Approaches to Study Strain Distributions in Nickel and Nickel-Base Superalloy Polycrystals
74. Altmetric Badge
    Chapter 73 Development and Application of an Optimization Protocol for Directional Solidification: Integrating Fundamental Theory, Experimentation and Modeling Tools
75. Altmetric Badge
    Chapter 74 INCONEL 718 Single and Multipass Modelling of Hot Forging
76. Altmetric Badge
    Chapter 75 Computational Fluid Dynamics Modelling of Heat Treatment of Single Crystal Nickel Based Superalloys for Turbine Blade Application
77. Altmetric Badge
    Chapter 76 Alloying Effects in the γ′ Phase of Co-Based Superalloys
78. Altmetric Badge
    Chapter 77 Creep Strength and Microstructure of Polycrystalline γ′ - Strengthened Cobalt-Base Superalloys
79. Altmetric Badge
    Chapter 78 Superalloys 2012
80. Altmetric Badge
    Chapter 79 Dynamic Strain Aging in Ni Base Alloys with Different Stacking Fault Energy
81. Altmetric Badge
    Chapter 80 The Effect of Water Vapor and Superalloy Composition on Thermal Barrier Coating Lifetime
82. Altmetric Badge
    Chapter 81 Potential of the Halogen Effect for the Formation of a Protective Alumina Scale on Ni-Base Superalloys
83. Altmetric Badge
    Chapter 82 Environmental and Dwell Effects on the Damage Tolerance Properties of ATI 718Plus ® Alloy
84. Altmetric Badge
    Chapter 83 Microstructural Characterisation of High Temperature Oxidation of Nickel Base Superalloy RR1000 and the Effect of Shot-Peening
85. Altmetric Badge
    Chapter 84 Experimental Determination of TTT Diagram for Alloy 718Plus®
86. Altmetric Badge
    Chapter 85 Development of a New 760°C (1400°F) Capable Low Thermal Expansion Alloy
87. Altmetric Badge
    Chapter 86 Low Cycle Fatigue Behavior of a New Wrought Ni-Co-Base Disk Superalloy TMW-4M3
88. Altmetric Badge
    Chapter 87 On the Development of Cast ATI 718Plus® Alloy for Structural Gas Turbine Engine Components
89. Altmetric Badge
    Chapter 88 Characterization and Modelling of Ni Based Superalloy Materials with a Dual Layered MCrAlY Coating System
90. Altmetric Badge
    Chapter 89 The Development and Validation of a New Thermodynamic Database for Ni-Based Alloys
91. Altmetric Badge
    Chapter 90 Alloying Effects on Heat-Treated Microstructure in Co-Al-W-Base Superalloys at 1300°C and 900°C
92. Altmetric Badge
    Chapter 91 High Temperature Creep of New L12 Containing Cobalt-Base Superalloys
93. Altmetric Badge
    Chapter 92 Polycrystalline γ-γ′-δ Ternary Eutectic Ni-Base Superalloys
94. Altmetric Badge
    Chapter 93 Dwell Notch Low-Cycle Fatigue Performance of Powder Metal Alloy 10
95. Altmetric Badge
    Chapter 94 Dwell Notch Low Cycle Fatigue Behavior of a Powder Metallurgy Nickel Disk Alloy
96. Altmetric Badge
    Chapter 95 Oxidation and the Effects of High Temperature Exposures on Notched Fatigue Life of an Advanced Powder Metallurgy Disk Superalloy
97. Altmetric Badge
    Chapter 96 Grain Boundary Engineering Alloy 706 for Improved High Temperature Performance
98. Altmetric Badge
    Chapter 97 Residual Stress Evolution during Manufacture of Aerospace Forgings
99. Altmetric Badge
    Chapter 98 Characterization and Computational Modeling of Minor Phases in Alloy LSHR
100. Altmetric Badge
     Chapter 99 An Advanced Cast-and-Wrought Superalloy (TMW-4M3) for Turbine Disk Applications Beyond 700°C
101. Altmetric Badge
     Chapter 100 AD730 ™ - A New Nickel-Based Superalloy for High Temperature Engine Rotative Parts