↓ Skip to main content

Light Metals 2014

Overview of attention for book
Cover of 'Light Metals 2014'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Evolution of the Technology for the Production of Alumina from Bauxites
  3. Altmetric Badge
    Chapter 2 Approaches to the Processing of Jamaican Bauxite with High Goethite Content
  4. Altmetric Badge
    Chapter 3 Improvement of Processing Characteristics of High Carbonate and High Silica Diasporic Bauxite by Enriching Roasting
  5. Altmetric Badge
    Chapter 4 New High-Performance Crystal Growth Modifiers to Improve Alumina Trihydrate Quality and Yield
  6. Altmetric Badge
    Chapter 5 Votorantim Metais — CBA Alumina Refinery Precipitation Modeling
  7. Altmetric Badge
    Chapter 6 Value of Systems Integration to Optimize Operation in Alumina Refineries
  8. Altmetric Badge
    Chapter 7 Study of Influences on the Bauxite Moisture and Solids in Filtrate in the Hyperbaric Filters through Design of Experiments (DOE) Statistic Tool
  9. Altmetric Badge
    Chapter 8 Increased Operational Flexibility in CFB Alumina Calcination
  10. Altmetric Badge
    Chapter 9 Increasing Extraction Efficiency Using a Closed Grinding Circuit
  11. Altmetric Badge
    Chapter 10 A Review of Two Phase Flow Modeling and Its Applicability to the Bayer Process
  12. Altmetric Badge
    Chapter 11 Pipeline Scaling Prevention and Removal Methods in Bayer Digestion Process
  13. Altmetric Badge
    Chapter 12 Using of Siliconate-Type Polymers as Inhibitor of Scaling at Aluminate Liquors Heating and Evaporation
  14. Altmetric Badge
    Chapter 13 Crystal Structure and Alumina Leaching Property of Na2O Doped C12A7
  15. Altmetric Badge
    Chapter 14 Decomposition Property of γ-2CaO·SiO2 during Leaching Process of Calcium Aluminate Slag
  16. Altmetric Badge
    Chapter 15 Effect of Calcium/Aluminium Ratio on Crystal Structure and Al2O3 Leaching Property of 12CaO·7Al2O3
  17. Altmetric Badge
    Chapter 16 Multi-Steps Carbonation Treatment of Calcified Slag of Red Mud
  18. Altmetric Badge
    Chapter 17 Tests on Comprehensive Recovery of Iron Minerals And Bauxite from High Iron Diasporic Bauxite by Medium Temperature Metal-Based Roasting
  19. Altmetric Badge
    Chapter 18 The Influence of the Mineral Composition of Low-Grade Aluminum Ores on Aluminium Extraction by Acid Leaching
  20. Altmetric Badge
    Chapter 19 Dry Sintering of Nepheline — A New More Energy Efficient Technology
  21. Altmetric Badge
    Chapter 20 A Study on Sintering Process Optimization of Alumina Attraction from Fly Ash
  22. Altmetric Badge
    Chapter 21 Effect of Pressure on Alumina Extraction from Low-Grade Bauxite by Acid-Leaching Method
  23. Altmetric Badge
    Chapter 22 Extraction of Alumina from Coal-Derived Pyrite Flotation Tailing by Pre-Desilication–Bayer Process
  24. Altmetric Badge
    Chapter 23 Extracting Alumina from Low Grade Bauxite with Ammonium Bisulfate Leaching
  25. Altmetric Badge
    Chapter 24 Hydrochemical Method of Low-Quality Raw Materials Processing to Alumina
  26. Altmetric Badge
    Chapter 25 The Enexal Bauxite Residue Treatment Process: Industrial Scale Pilot Plant Results
  27. Altmetric Badge
    Chapter 26 Sustainability and Bauxite Deposits
  28. Altmetric Badge
    Chapter 27 Valorization of Alumina Red Mud for Production of Geopolymeric Bricks and Tiles
  29. Altmetric Badge
    Chapter 28 Study of Alternative Technologies for Residue Disposal (Red Mud)
  30. Altmetric Badge
    Chapter 29 Economic Analysis of Producing Alumina with Low-Grade Bauxite(Red Mud) by Calcification-Carbonization Method
  31. Altmetric Badge
    Chapter 30 Recovery of Titanium Oxide from Undigested Sand of an Indian Alumina Refinery and Preparation of Value Added Titanium Carbide
  32. Altmetric Badge
    Chapter 31 AMAG 6XXX Series Alloys for Chassis Application in the Automotive Industry
  33. Altmetric Badge
    Chapter 32 Heat Treating of High Pressure Die Cast Components: Challenges and Possibilities
  34. Altmetric Badge
    Chapter 33 Influence of the Chemical Composition on the Ductility of an AlSiCuZnFe Recycling foundry Alloy
  35. Altmetric Badge
    Chapter 34 Assessment of Hot Cracking During Tig Welding of B206 Aluminum Alloy
  36. Altmetric Badge
    Chapter 35 Influence of Microstructure on the Folding Behavior of Crash Relevant Aluminum Extrusion Parts
  37. Altmetric Badge
    Chapter 36 Effect of TiC Powder Addition on the Grain Refinement Response of B319 Aluminium Alloy
  38. Altmetric Badge
    Chapter 37 Properties of AlZn10Si8Mg Alloys for High Performances Application
  39. Altmetric Badge
    Chapter 38 An Experimental and Modeling Investigation on High-Rate Formability of Aluminum
  40. Altmetric Badge
    Chapter 39 Influence of Chemical Composition and Process Parameters on Mechanical Properties and Formability of AlMgSi-Sheets for Automotive Application
  41. Altmetric Badge
    Chapter 40 High Strength Aluminum Brazing Sheets for Condenser Fins of Automotive Heat Exchangers
  42. Altmetric Badge
    Chapter 41 High-Temperature Processes Occurring During Homogenization of AA6082 Aluminum Alloy
  43. Altmetric Badge
    Chapter 42 A Study of The Artificial Ageing on The Low Temperature Creep of AlMgSi (AA6201) Wires
  44. Altmetric Badge
    Chapter 43 Precipitates in Long Term Aging Al 5083 Alloy
  45. Altmetric Badge
    Chapter 44 Effect of Modified Aging Treatments on the Tensile Properties, Quality Indices and Fatigue Life of Cast Components of Aluminum Alloy 354
  46. Altmetric Badge
    Chapter 45 Effect of Vanadium Additions on the Structure of Aluminium (AL99.5) And 6XXX Aluminium Alloys
  47. Altmetric Badge
    Chapter 46 Aluminum Tailor-Welded Blanks for High Volume Automotive Applications
  48. Altmetric Badge
    Chapter 47 A New Approach for Evaluation of Fatigue Life of Al Wire Bonds in Power Electronics
  49. Altmetric Badge
    Chapter 48 Long and Small Fatigue Crack Growth in Aluminum Alloys
  50. Altmetric Badge
    Chapter 49 Alumina Silica Brick Corrosion by Different Aluminium Alloys
  51. Altmetric Badge
    Chapter 50 Effect of Salt Solution Corrosion on Tensile Properties of Vacuum High Pressure Die Cast A356 Alloy Subjected to Heat Treatment
  52. Altmetric Badge
    Chapter 51 Effect of the Thermo-Mechanical Treatment on IGC Susceptibility of AA 5083 Alloy
  53. Altmetric Badge
    Chapter 52 Role of Ni and Zr in Preserving the Strength of 354 Aluminum Alloy at High Temperature
  54. Altmetric Badge
    Chapter 53 Stress-Strain Curves of Pure Aluminum and Al-4.5mass%Cu Alloy in Semi-Solid State
  55. Altmetric Badge
    Chapter 54 Modeling Texture Evolution of Pure FCC Alloy During Annealing
  56. Altmetric Badge
    Chapter 55 Microstructure and Mechanical Properties of 3003 Aluminum Alloy with Mg and Ni Addition
  57. Altmetric Badge
    Chapter 56 Lightweight Construction for Electric Mobility Using Aluminium
  58. Altmetric Badge
    Chapter 57 Deformation of Open-Cell Microcellular Pure Aluminum Investigated by the Acoustic Emission Technique
  59. Altmetric Badge
    Chapter 58 The Research on Process of Impact Factors of Hard Anodic Oxidation for 6061 Aluminum Alloy
  60. Altmetric Badge
    Chapter 59 Using Scrap in Recycling Alloys for Structural Applications in The Automotive Industry
  61. Altmetric Badge
    Chapter 60 Residual Stress Analysis in Semi-Permanent Mold Engine Head Castings
  62. Altmetric Badge
    Chapter 61 Tensile and Shear Mechanical Properties in a Thermo-Mechanical-Electrical Processed Spot Weld
  63. Altmetric Badge
    Chapter 62 Development of High-Strength and Highly Ductile Hypo-Eutectic Al-Si Alloys by Nano-Refining the Constituent Phases
  64. Altmetric Badge
    Chapter 63 Anodization and Optical Appearance of Sputter Deposited Al-Zr Coatings
  65. Altmetric Badge
    Chapter 64 Friction Coefficients on Compression Testing Of AA6060 and 42CrMo4 with Different Lubrication Conditions
  66. Altmetric Badge
    Chapter 65 Effect of TIN on the Corrosion and Electrochemical Behavior of Al-Zn-Mg Alloy in Sea Water
  67. Altmetric Badge
    Chapter 66 Interface Evolution in the Process of Fabricating Aluminum Foam Sandwiches
  68. Altmetric Badge
    Chapter 67 Alloy AlZn9 Casted in the Process of Rapid Solidification and Consolidated in the Process of Plastic Forming
  69. Altmetric Badge
    Chapter 68 Evolution of Microstructure and Texture During Severe Cold Rolling and Annealing of Al-2.5%Mg and Al-2.5%Mg-0.2%Sc Alloys
  70. Altmetric Badge
    Chapter 69 Dynamic Simulation of Internal Logistics in Aluminum Downstream Manufacturing
  71. Altmetric Badge
    Chapter 70 Influence of the Twin-Roll Casting Parameters on the Microsegregation in Thin Strips of the Aluminium Alloy EN AW-6082
  72. Altmetric Badge
    Chapter 71 Determination of Aluminum Rolling Oil And Machinery Oil Residues on Finished Aluminum Sheet and Foil Using Elemental Analysis and Fourier Transform Infrared Spectroscopy Coupled with Multivariate Calibration
  73. Altmetric Badge
    Chapter 72 A Numerical and Experimental Study of Homogenization of Al-Si-Mg Alloys
  74. Altmetric Badge
    Chapter 73 Effect of Mg2Si Phase on Extrusion of AA6005 Aluminum Alloy
  75. Altmetric Badge
    Chapter 74 Analysis of the Evolution and Deformation of Pore Morphology During Compression
  76. Altmetric Badge
    Chapter 75 Cell Electrical Preheating Practices at Dubal
  77. Altmetric Badge
    Chapter 76 Dubal Cell Voltage Drop Initiatives Towards Low Energy High Amperage Cells
  78. Altmetric Badge
    Chapter 77 Startup of Shut-Down Pots — Problems and Solutions to Improve Results
  79. Altmetric Badge
    Chapter 78 Thermal Events of the Early Life of an Aluminum Electrolysis Cell
  80. Altmetric Badge
    Chapter 79 Regulation System to Improve Quality of the Metal Sucked During Tapping Operation
  81. Altmetric Badge
    Chapter 80 Key Success Factors Deploying a Manufacturing Excellence Solution (Mesal™) in Rio Tinto Alcan
  82. Altmetric Badge
    Chapter 81 Influence of the Cathode Surface Geometry on the Metal Pad Current Density
  83. Altmetric Badge
    Chapter 82 On the Influence of Mhd Driven Convection on Cathode Wear
  84. Altmetric Badge
    Chapter 83 Effect of Innovative Cathode on Bath/Metal Interface Fluctuation in Aluminum Electrolytic Cell
  85. Altmetric Badge
    Chapter 84 Simulation and Optimization of Cathode Current Distribution to Reduce the Horizontal Current in the Aluminum Liquid
  86. Altmetric Badge
    Chapter 85 Numerical Simulation of Full Life Cycle Cathode Assembly Performances for Design Optimization
  87. Altmetric Badge
    Chapter 86 Bar to Block Contact Resistance in Aluminum Reduction Cell Cathode Assemblies
  88. Altmetric Badge
    Chapter 87 Anode Rod to Beam Contact
  89. Altmetric Badge
    Chapter 88 Towards Decreasing Energy Consumption of Aluminum Reduction by Using Anodes with Holes and Channels
  90. Altmetric Badge
    Chapter 89 Comparing Different Measurement Approaches to Characterize All PFC Emissions
  91. Altmetric Badge
    Chapter 90 Anode Effect Phenomena During Conventional AEs, Low Voltage Propagating AEs & Non-Propagating AEs
  92. Altmetric Badge
    Chapter 91 Monitoring of Continuous PFC Formation in Small to Moderate Size Aluminium Electrolysis Cells
  93. Altmetric Badge
    Chapter 92 At-Line Analysis of Polycyclic Aromatic Hydrocarbons in Aluminium Primary Production
  94. Altmetric Badge
    Chapter 93 Raw Gas Particles and Depositions in Fume Treatment Facilities in Aluminium Smelting
  95. Altmetric Badge
    Chapter 94 The Nature of Particles and Fines in Potroom Dust
  96. Altmetric Badge
    Chapter 95 Predictive Tools in Evaluating Re-Entrainment of Exhausted Particulate in Different Ventilator Configurations for Different Heat Process Applications
  97. Altmetric Badge
    Chapter 96 Economic and Environmental Alternative for Destination of Spent Pot Lining from Primary Aluminum Production
  98. Altmetric Badge
    Chapter 97 Improving XRD Analysis for Complex Bath Chemistries — Investigations and Challenges Faced
  99. Altmetric Badge
    Chapter 98 Al2O3-Na3AlF6 Man-Made Ledge Composites for Aluminum Electrolysis Cells
  100. Altmetric Badge
    Chapter 99 Structural Characterisation and Thermophysical Properties of the side Ledge in Hall-Héroult Cells
  101. Altmetric Badge
    Chapter 100 The Melting Behaviour of Aluminium Smelter Crust
  102. Altmetric Badge
    Chapter 101 Key Physical Properties of Smelter Grade Alumina
  103. Altmetric Badge
    Chapter 102 Modeling the Behavior of Alumina Agglomerate in the Hall-Héroult Process
  104. Altmetric Badge
    Chapter 103 Wetting Characteristics of Cryolite-Based Melts on Spinels Substrate
  105. Altmetric Badge
    Chapter 104 Abart CDS — A New Compact Multi-Pollutant Pot Gas and Alumina Handling System
  106. Altmetric Badge
    Chapter 105 Development on Electrolytic Cell Gas Cooling
  107. Altmetric Badge
    Chapter 106 15 Years of GTC Operation at Aldel: Long-Term Assessment of GTC Performance
  108. Altmetric Badge
    Chapter 107 Pot Gas Cooling Technologies
  109. Altmetric Badge
    Chapter 108 Modelling HF Generation: The Role of Ambient Humidity
  110. Altmetric Badge
    Chapter 109 Online Monitoring of Aluminium Primary Production Gas Composition by Use of Fourier-Transform Infrared Spectrometry
  111. Altmetric Badge
    Chapter 110 On the Prediction of the Crust Evolution Inside Aluminum Electrolysis Cells
  112. Altmetric Badge
    Chapter 111 An Improved Finite Element Model for Thermal Balance Analysis of Aluminum Electrolysis Cells
  113. Altmetric Badge
    Chapter 112 A Modelling of Heat Losses in Aluminium Reduction Cell With Slotted Anodes
  114. Altmetric Badge
    Chapter 113 AP60 Cell Start-Up: Thermal Electrical Mechanical Quarter Cell Model
  115. Altmetric Badge
    Chapter 114 A Numerical Approach for the Design of Anode Beam Mechanical Systems
  116. Altmetric Badge
    Chapter 115 MHD Stability for Irregular and Disturbed Aluminium Reduction Cells
  117. Altmetric Badge
    Chapter 116 Revised Benchmark Problem for Modeling of Metal Flow and Metal Heaving in Reduction Cells
  118. Altmetric Badge
    Chapter 117 Dynamic Simulation of Cell Voltage Resonance Effect in Aluminum Electrolysis Cell
  119. Altmetric Badge
    Chapter 118 Analysis of the MHD Instabilities in Reduction Cells with Lyapunov Method
  120. Altmetric Badge
    Chapter 119 A Novel Design Criterion for Alumina Feeders in Aluminium Electrolysis Cells
  121. Altmetric Badge
    Chapter 120 Non-Linear Behavior of a Metallic Foam for the Reduction of Energy Losses at Electrical Contacts in the Aluminum Industry
  122. Altmetric Badge
    Chapter 121 Influence of Heat Source Cooling Limitation on ORC System Layout and Working Fluid Selection: the Case Og Aluminium Industry
  123. Altmetric Badge
    Chapter 122 Concept and Design of Dubal Pot Start-Up Fuses
  124. Altmetric Badge
    Chapter 123 A Novel Heat Recovery Technology from an Aluminum Reduction Cell Side Walls: Experimental and Theoretical Investigations
  125. Altmetric Badge
    Chapter 124 On-Line Monitoring of Anode Currents: Experience at Trimet
  126. Altmetric Badge
    Chapter 125 Startup and Tuning of Material Distribution System at Aluminium Smelter in Qatar
  127. Altmetric Badge
    Chapter 126 Mass Transfer Reactions Near the Cathode During Aluminium Electrolysis
  128. Altmetric Badge
    Chapter 127 Current Efficiency in Aluminium Reduction Cells: Theories, Models, Concepts, and Speculations
  129. Altmetric Badge
    Chapter 128 Effect of Current Density and Phosphorus Species on Current Efficiency in Aluminum Electrolysis at High Current Densities
  130. Altmetric Badge
    Chapter 129 A Concept for Electrowinning of Aluminium Using Depolarized Gas Anodes
  131. Altmetric Badge
    Chapter 130 Investigations into Innovative and Sustainable Processes for the Carbothermic Production of Gaseous Aluminum
  132. Altmetric Badge
    Chapter 131 A CFD-PBM Coupled Model Predicting Anodic Bubble Size Distribution in Aluminum Reduction Cells
  133. Altmetric Badge
    Chapter 132 Simulation of Anode Bubble: Volume of Fluid Method
  134. Altmetric Badge
    Chapter 133 EAF Carbothermic Co-Reduction of Alumina and Silica for the Direct Production of Al-Si Master Alloy
  135. Altmetric Badge
    Chapter 134 Preparation and start-up of Arvida Smelter, AP60 Technological Center
  136. Altmetric Badge
    Chapter 135 Industrial Running of the 530kA Potline in North-Western China
  137. Altmetric Badge
    Chapter 136 The end of an era for Søderberg Technology in North and South America
  138. Altmetric Badge
    Chapter 137 Successful Start-Up of World Largest Greenfield Smelter
  139. Altmetric Badge
    Chapter 138 Understanding and Managing Alumina Quality Fluctuations to Minimise Impact on Cell Performance and Metal Quality
  140. Altmetric Badge
    Chapter 139 Developing a New Process Indicator Based On The Relationship Between an Electrolysis Cell Impurity Balance and its Incidents
  141. Altmetric Badge
    Chapter 140 New Generation Control for Daily Aluminium Smelter Improvement Generation 3 Process Control for Potlines
  142. Altmetric Badge
    Chapter 141 Current Status of Research and Development on Automatization and Intellectuality for Plants of Aluminum in China
  143. Altmetric Badge
    Chapter 142 Statistical Evaluation and Modeling of the Link between Anode Effects and Bath Height, and Implications for the ALPSYS Pot Control System
  144. Altmetric Badge
    Chapter 143 Mechanisms and Control of Macrosegregation in Dc Casting
  145. Altmetric Badge
    Chapter 144 Modelling of Micro- and Macrosegregation in Multicomponent Aluminium Alloys Accounting for Secondary Phase Formation
  146. Altmetric Badge
    Chapter 145 Macrosegregation Modelling of DC-Casting Including Grain Motion and Surface Exudation
  147. Altmetric Badge
    Chapter 146 A New DC Casting Technology for Extrusion Billets with Improved Surface Quality
  148. Altmetric Badge
    Chapter 147 An Innovative Automated Surface Inspection of DC Cast Billets
  149. Altmetric Badge
    Chapter 148 Impact of Cooling Water Composition on Heat Transfer in Ingot Casting
  150. Altmetric Badge
    Chapter 149 Neutron Diffraction Measurement of As-Cast Residual Stresses in Aa7050 Rolling Plate Ingots: Influence of A Wiper
  151. Altmetric Badge
    Chapter 150 Life Cycle Assessment of Secondary Aluminium Refining
  152. Altmetric Badge
    Chapter 151 A Material Flow Model for Impurity Accumulation in Beverage Can Recycling Systems
  153. Altmetric Badge
    Chapter 152 The viability of a “Voluntary Refund-Deposit System” for Aluminum can Recycling in the U.S.
  154. Altmetric Badge
    Chapter 153 Oxide Skin Strength Measurements on Molten Aluminum — Manganese Alloys with and Without Salt on Surface
  155. Altmetric Badge
    Chapter 154 Oxidation of Manganese-Containing Aluminum Alloys
  156. Altmetric Badge
    Chapter 155 Development of a Sampling Device for Furnace Dross
  157. Altmetric Badge
    Chapter 156 Grain Refinement of Aluminium Alloys: Recent Developments in Predicting the As-Cast Grain Size of Alloys Refined by Al-Ti-B Master Alloys
  158. Altmetric Badge
    Chapter 157 A Comparison of the Effects of Al-Ti-B Type Grain Refiners from Different Makers on Pure Aluminum
  159. Altmetric Badge
    Chapter 158 Improved Grain Refinement of AA6060 Extrusion Billets
  160. Altmetric Badge
    Chapter 159 On the Performance of A Novel Grain Refiner in Hyper-Eutectic Al-Si Cast Alloys
  161. Altmetric Badge
    Chapter 160 Analysis of Boron Treatment for V Removal Using AlB 2 and AlB 12 Based Master Alloys
  162. Altmetric Badge
    Chapter 161 The Effect of Trace Levels of Ni And V on the Microstructure and Properties of Four Common Aluminum Alloys
  163. Altmetric Badge
    Chapter 162 Evaluation of Functional Properties of the Rapidly Solidified Cast AlSi30 Alloy As A Material for Transport Applications
  164. Altmetric Badge
    Chapter 163 The Near-Rapid Solidification Behavior of AA1070 Aluminum Alloy
  165. Altmetric Badge
    Chapter 164 Computational Analysis of Thermal Process of A Regenerative Aluminum Melting Furnace
  166. Altmetric Badge
    Chapter 165 Electromagnetic Stirring in Melting Furnaces — a Critical Evaluation
  167. Altmetric Badge
    Chapter 166 Sampling Tool for In-Depth Study of Furnace Processes
  168. Altmetric Badge
    Chapter 167 Transient Properties of Refractory Castable with Hydraulic Binders
  169. Altmetric Badge
    Chapter 168 A Novel Method of Online Measurement to Develop Specific Heating-Up Procedures for Industrial Furnaces
  170. Altmetric Badge
    Chapter 169 20 Years of LiMCA Utilization in the Aluminum Industry: A Review of the Technology Development and Applications
  171. Altmetric Badge
    Chapter 170 Clean Aluminum Processing: New Avenues for Measurement and Analysis
  172. Altmetric Badge
    Chapter 171 Metallurgical Performance of Salt and Chlorine Fluxing Technologies in Casting Furnaces
  173. Altmetric Badge
    Chapter 172 Metal Cleanliness Evaluation of Reusable Ceramic Foam Filters
  174. Altmetric Badge
    Chapter 173 Parallel Laboratoryand Industrial Scale Aluminium Filtration Tests With Al2O3 And Sic Based CFF Filters
  175. Altmetric Badge
    Chapter 174 New Developments of the I-60 SIR Melt Refining Unit
  176. Altmetric Badge
    Chapter 175 A New Vacuum Degassing Process For Molten Aluminum
  177. Altmetric Badge
    Chapter 176 Development and Demonstration of a Molten Metal Cooling Trough to Improve Casthouse Performance
  178. Altmetric Badge
    Chapter 177 Commissioning and Start-Up of Ingot Casting Machines in the Biggest Integrated Aluminum Complex in the World
  179. Altmetric Badge
    Chapter 178 Preventing Explosions in Maintenance Pits under Furnaces
  180. Altmetric Badge
    Chapter 179 The Effect of Magnesium Supply on the Quality of Aluminum Melts
  181. Altmetric Badge
    Chapter 180 Effects of Microstructure And Defects on Tensile and Fracture Behaviour of a Hpdc Component: Potential Properties and Actual Outcome of En AC-44300 Alloy
  182. Altmetric Badge
    Chapter 181 Thermal Parameters Analysis During Directional Solidification of Al-Cu Eutectic Alloys
  183. Altmetric Badge
    Chapter 182 Impurity Level Distribution in GPC And CPC and Impact on Anode Properties
  184. Altmetric Badge
    Chapter 183 Determination of Contact Angle from Raw Material Properties Using Linear Multivariable Analysis
  185. Altmetric Badge
    Chapter 184 Use of Coal Tar Pitch Coke for Producing Prebaked Electrodes
  186. Altmetric Badge
    Chapter 185 Characterization of Dry Aggregates in Carbon Anodes by Image Analysis
  187. Altmetric Badge
    Chapter 186 Characterization of Packing Ability of Coke Particles
  188. Altmetric Badge
    Chapter 187 Texture Analysis Of Anode Paste Images
  189. Altmetric Badge
    Chapter 188 High Temperature Compression Test to Determine the Anode Paste Mechanical Properties
  190. Altmetric Badge
    Chapter 189 Viscoplastic Modeling of the Green Anode Forming Process
  191. Altmetric Badge
    Chapter 190 Characterization of Homogeneity of Green Anodes Through X-Ray Tomography and Image Analysis
  192. Altmetric Badge
    Chapter 191 Field Experience with the Buss Kneader Type KX: Highest Quality and Throughput Targets Attained
  193. Altmetric Badge
    Chapter 192 Maximizing Green Anode Slots Height through a Rigorous Methodology and Finite Elements Modeling
  194. Altmetric Badge
    Chapter 193 High Performance of “Eolios” Pitch Fume Treatment System
  195. Altmetric Badge
    Chapter 194 Improving Fuel Gas Injection in Anode Baking Furnace
  196. Altmetric Badge
    Chapter 195 Anode Baking Furnace Firing System Lean Engineering
  197. Altmetric Badge
    Chapter 196 Effect of Heating Rate on the Crack Formation During Baking in Carbon Anodes Used in Aluminum Industry
  198. Altmetric Badge
    Chapter 197 Structured Approach to Modernization of Fume Treatment Centers
  199. Altmetric Badge
    Chapter 198 Upgrade of an Existing Fume Treatment Plant at Aluar to Cope Higher Production in the New Open Type Anode Baking Furnaces
  200. Altmetric Badge
    Chapter 199 An Approach to Help Control Air Permeability of Pre-Baked Anodes
  201. Altmetric Badge
    Chapter 200 Optimising Anode Performance in Dubal Reduction Cells
  202. Altmetric Badge
    Chapter 201 Paste Production and its Performance in Søderberg Smelters
  203. Altmetric Badge
    Chapter 202 Study of Manufacturing Technology for High Quality Anodes
  204. Altmetric Badge
    Chapter 203 Understanding Anode Overpotential
  205. Altmetric Badge
    Chapter 204 Room Temperature Creep Behaviour of Ramming Paste Baked at Different Temperatures
  206. Altmetric Badge
    Chapter 205 Characterisation of the Material Behaviour of Cathode Steel Collector Bar at High Temperatures and Low Stress Levels
  207. Altmetric Badge
    Chapter 206 Cartography and Chemical Composition of the Different Deposits in the Hall-Heroult Process
  208. Altmetric Badge
    Chapter 207 Interaction of Sodium Vapor and Graphite Studied by Thermogravimetric Analysis
  209. Altmetric Badge
    Chapter 208 N-SiC Side Lining — Variations of Materials Structure
  210. Altmetric Badge
    Chapter 209 Improving Energy Efficiency at Albras: A Case Study in the Rodding Shop
  211. Altmetric Badge
    Chapter 210 Arts-Anode & Rod Tracking System — A New Tool for Optimization of Anode Performance
  212. Altmetric Badge
    Chapter 211 Anode Rodding Basics
  213. Altmetric Badge
    Chapter 212 Anode Electrical Resistance Measurements: Learning And Industrial On-Line Measurement Equipment Development
  214. Altmetric Badge
    Chapter 213 Automated Crack Detection Method Applied to CT Images of Baked Carbon Anode
  215. Altmetric Badge
    Chapter 214 Development of A New Methodology to Measure Contact Pressure Along A Thermo-Electo-Mechanical Interface
  216. Altmetric Badge
    Chapter 215 Rodding in Hall-Héroult Cells: An Fea Model that Predicts Room Temperature Mechanical Properties and Cracking Tendency of Thimbles
  217. Altmetric Badge
    Chapter 216 Temperature Fitting Method for Predicting Equidistant Voltage Drop of Anode Rod in Aluminum Reduction Cell
  218. Altmetric Badge
    Chapter 217 Effect of La on the Electrolysis Performance of 46Cu-25Ni-19Fe-10Al Metal Anode
  219. Altmetric Badge
    Chapter 218 Evaluation of a Pre-Oxidation Treatment for Limiting Electrolyte Penetration in Cu-Ni-Fe Anode during Al Electrolysis
  220. Altmetric Badge
    Chapter 219 Inert Anodes: An Update
  221. Altmetric Badge
    Chapter 220 Investigating the Corrosion Behaviors of Fe-Ni-Cr Anode Material for Aluminum Electrolysis
  222. Altmetric Badge
    Chapter 221 The Metal Phase Selection of 10NiO-NiFe2O4-Based Cermet Anodes for Aluminum Electrolysis
  223. Altmetric Badge
    Chapter 222 Study on the Anode and Cathode Configuration of Aluminum Reduction Cell
  224. Altmetric Badge
    Chapter 223 Study on Cathode Structure Optimization of Aluminum Reduction Cell
  225. Altmetric Badge
    Chapter 224 Effect of Process Control Agent on the Microstructure and Mechanical Behavior of an Aluminum and B4C Metal Matrix Composite
  226. Altmetric Badge
    Chapter 225 Microstructure and Damping Properties of Ultra Fine Grained Al Wires Reinforced by Al2O3 Nanoparticles
  227. Altmetric Badge
    Chapter 226 Elevated Temperature Deformation Behavior of High Strength Al-Cu-Mg-Ag Based Alloy Reinforced By TiB2 Particles
  228. Altmetric Badge
    Chapter 227 Understanding the Role of Nanodispersions on the Properties of A390 Hypereutectic Al-Si Cast Alloy
  229. Altmetric Badge
    Chapter 228 Phase Formation and Mechanical Properties of Al-Mg-Mn-Ti-B-Zr-Sc Composite Material
  230. Altmetric Badge
    Chapter 229 Physico-Mechanical and Electrical Properties of Aluminum-Based Composite Materials with Carbon Nanoparticles
  231. Altmetric Badge
    Chapter 230 Contactless Acoustic Wave Generation in a Melt By Electromagnetic Induction
  232. Altmetric Badge
    Chapter 231 Brownian Motion Effects on the Particle Settling and its Application to Solidification Front in Metal Matrix Composites
  233. Altmetric Badge
    Chapter 232 X-Ray Tomography and Small-Angle Neutron Scattering Characterization of Nano-Composites: Static and In Situ Experiments
  234. Altmetric Badge
    Chapter 233 The Physical-Mechanical Properties of Aluminum Nanocomposites Produced by High Energy Explosion Impact
  235. Altmetric Badge
    Chapter 234 Processing of Metal Matrix Composites under External Fields and Their Application as Grain Refiner
  236. Altmetric Badge
    Chapter 235 Grain Refinement and Nanoparticle Dispersion Using Traveling Magnetic Field
  237. Altmetric Badge
    Chapter 236 Nanoparticles Distribution and Mechanical Properties of Aluminum-Matrix Nano-Composites Treated with External Fields
  238. Altmetric Badge
    Chapter 237 Manufacturing of Nano-Surface AA7075 Composites by Friction Stir Processing
  239. Altmetric Badge
    Chapter 238 Novel Ultrafine-Grained Aluminium Metal Matrix Composites Prepared from Fine Atomized Al Powders
  240. Altmetric Badge
    Chapter 239 The Structure, Phase Composition and Mechanical Properties of Hot Pressed Metal Matrix Nanocomposites Al-Al4C3
  241. Altmetric Badge
    Chapter 240 Mechanical Properties of Aluminium-Based Nanocomposite Reinforced with Fullerenes
  242. Altmetric Badge
    Chapter 241 The Effect of Mechanically Exfoliated Graphene Dispersion on the Mechanical Properties of Aluminum/Graphene Composites
  243. Altmetric Badge
    Chapter 242 Development of Al/C60 Composites with Nano-Network Structures
  244. Altmetric Badge
    Chapter 243 AlTi5B1 Grain Refiners on the Casting of DIN 226 Aluminum Alloys
Attention for Chapter 151: A Material Flow Model for Impurity Accumulation in Beverage Can Recycling Systems
Altmetric Badge

Citations

dimensions_citation
5 Dimensions

Readers on

mendeley
6 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Chapter title
A Material Flow Model for Impurity Accumulation in Beverage Can Recycling Systems
Chapter number 151
Book title
Light Metals 2014
Published by
Springer, Cham, January 2014
DOI 10.1007/978-3-319-48144-9_151
Book ISBNs
978-3-31-948590-4, 978-3-31-948144-9
Authors

Amund N. Løvik, Daniel B. Müller

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 6 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 6 100%

Demographic breakdown

Readers by professional status Count As %
Researcher 2 33%
Professor 1 17%
Student > Doctoral Student 1 17%
Unknown 2 33%
Readers by discipline Count As %
Environmental Science 2 33%
Psychology 1 17%
Unknown 3 50%