↓ Skip to main content

Advances in Italian Mechanism Science

Overview of attention for book
Cover of 'Advances in Italian Mechanism Science'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Design and Implementation of a Low-Cost Mechatronic Shoe for Biomechanical Analysis of the Human Locomotion
  3. Altmetric Badge
    Chapter 2 A Study of Feasibility for a Limb Exercising Device
  4. Altmetric Badge
    Chapter 3 DARTAGNAN a Self-balanced Rehabilitation Robot Able to Work in Active and Passive Modes on Both Sides of Upper and Lower Limbs
  5. Altmetric Badge
    Chapter 4 Dynamic Analysis of Handcycling: Mathematical Modelling and Experimental Tests
  6. Altmetric Badge
    Chapter 5 A Kinematic Solution of a Novel Leg Mechanism with Parallel Architecture
  7. Altmetric Badge
    Chapter 6 Multi-target Planar Needle Steering with a Bio-inspired Needle Design
  8. Altmetric Badge
    Chapter 7 Development of an Active Force Plate for Testing Lower-Limb Prostheses
  9. Altmetric Badge
    Chapter 8 Determination of the Human Arm Stiffness Efficiency with a Two Antagonist Muscles Model
  10. Altmetric Badge
    Chapter 9 Design of a Miniaturized Safety Clamping Device for Portable Kidney Replacement Systems
  11. Altmetric Badge
    Chapter 10 Conceptual Design of a Mechatronic Biomedical Wearable Device for Blood Ultrafiltration
  12. Altmetric Badge
    Chapter 11 Design of an Underactuated Hand Exoskeleton with Joint Estimation
  13. Altmetric Badge
    Chapter 12 Standard and Natural Motion Protocols for the Kinetic Measurements of the Squat
  14. Altmetric Badge
    Chapter 13 Design and Simulation of an Assisting Mechanism for Arm Exercises
  15. Altmetric Badge
    Chapter 14 Role of Scientific-Technical Museums in the Future of Mechanical
  16. Altmetric Badge
    Chapter 15 An Analysis of the Hydraulic Saw of Hierapolis
  17. Altmetric Badge
    Chapter 16 Riccati Equation Based Nonlinear Filter: A Case Study for Hydraulic Actuators in the Presence of Dead-Zone
  18. Altmetric Badge
    Chapter 17 Trajectories Generation with Constant Extrusion Rate for Experimentations on AM Techniques and Extrusion Based Technologies
  19. Altmetric Badge
    Chapter 18 Preliminary Design of a Simplified Pneumatic Actuator
  20. Altmetric Badge
    Chapter 19 Multibody Model of Under-Actuated Tendon Driven Finger to Study the Antagonist Tendon
  21. Altmetric Badge
    Chapter 20 A Model Reduction Strategy for Flexible-Link Multibody Systems
  22. Altmetric Badge
    Chapter 21 Topology Optimization and Analysis of Static Transmission Error in Lightweight Gears
  23. Altmetric Badge
    Chapter 22 A Strategy for Moving Cable Driven Robots Safely in Case of Cable Failure
  24. Altmetric Badge
    Chapter 23 Approaches to the Detectability of Faults in Railway Pantograph Mechanism
  25. Altmetric Badge
    Chapter 24 Behaviour of Tilting-Pad Journal Bearings in Case of Large Manufacturing Errors
  26. Altmetric Badge
    Chapter 25 A New Automated 2 DOFs 3D Desktop Optical Scanner
  27. Altmetric Badge
    Chapter 26 Adam’s Hand: An Underactuated Robotic End-Effector
  28. Altmetric Badge
    Chapter 27 Automatic System for Fibers Extraction from Brooms
  29. Altmetric Badge
    Chapter 28 Functional Design of a Robotic Gripper for Adaptive Robotic Assembly
  30. Altmetric Badge
    Chapter 29 Optimal Design of a Reconfigurable End-Effector for Cable-Suspended Parallel Robots
  31. Altmetric Badge
    Chapter 30 Kinematic Optimization of a 2DoF PRRRP Manipulator
  32. Altmetric Badge
    Chapter 31 Optimized Trajectory Planning of Pick and Place Operations to Be Performed by Cable-Driven Parallel Robots
  33. Altmetric Badge
    Chapter 32 An Innovative Method for Sizing Actuating Systems of Manipulators with Generic Tasks
  34. Altmetric Badge
    Chapter 33 Experimentally Based Design of a Manually Operated Baler for Straw Bale Construction
  35. Altmetric Badge
    Chapter 34 Fast Calibration Procedure of the Dynamic Model of an Autonomous Underwater Vehicle from a Reduced Set of Experimental Data
  36. Altmetric Badge
    Chapter 35 Braking Energy Recovery in High Speed Trains: An Innovative Model
  37. Altmetric Badge
    Chapter 36 Dynamic Model and Instability Evaluation of an Articulated Mobile Agri-Robot
  38. Altmetric Badge
    Chapter 37 NVH Analysis of Automotive Components: A Carbon Fiber Suspension System Case
  39. Altmetric Badge
    Chapter 38 Dynamics of a Tethered Rover on Rough Terrain
  40. Altmetric Badge
    Chapter 39 Wind Propulsion for Robot Surface Mobility
  41. Altmetric Badge
    Chapter 40 Anti-dive Front Suspension for Agricultural Tractors: Dynamic Model and Validation
  42. Altmetric Badge
    Chapter 41 Dynamic Model of an Independent Carts System
  43. Altmetric Badge
    Chapter 42 Tyre-Road Adherence Conditions Estimation for Intelligent Vehicle Safety Applications
  44. Altmetric Badge
    Chapter 43 Tilting Pad Journal Bearing TEHD Analysis: An Innovative Model
  45. Altmetric Badge
    Chapter 44 Thermo-Hydrodynamic Analysis of Tilting Pad Journal Bearing with General Purpose CFD Software
  46. Altmetric Badge
    Chapter 45 Multiple Holes Rectangular Gas Thrust Bearing: Dynamic Stiffness Calculation with Lumped Parameters Approach
  47. Altmetric Badge
    Chapter 46 Theoretical and Experimental Study of a Rectangular Grooved Pocketed Air Pad
  48. Altmetric Badge
    Chapter 47 Experimental Identification of an Aerostatic Thrust Bearing
  49. Altmetric Badge
    Chapter 48 Experimental Analysis of the Influence of the Electrical Arc on the Wear Rate of Contact Strip and Contact Wire in a.c. System
  50. Altmetric Badge
    Chapter 49 Low-Cost Experimental Assessment of Forces in the Contact Bridge-Soundboard of Stringed Musical Instruments
  51. Altmetric Badge
    Chapter 50 Vibration Modes of Piezoelectric Bimorphs: A Sensitivity Analysis
  52. Altmetric Badge
    Chapter 51 Concurrent Active Control and Dynamic Structural Modification in the Design and the Optimization of Vibrating Systems
  53. Altmetric Badge
    Chapter 52 A Vibration Isolator Based on Magneto-Rheological Elastomer
  54. Altmetric Badge
    Chapter 53 A Physical Analytical Model to Study the Elasto-Kinematic Behaviour of a MacPherson Suspension
  55. Altmetric Badge
    Chapter 54 A Smart System for Shock and Vibration Isolation of Sensitive Electronic Devices On-Board a Vehicle
  56. Altmetric Badge
    Chapter 55 Wavelet Analysis of Gear Rattle Induced by a Multi-harmonic Excitation
  57. Altmetric Badge
    Chapter 56 Analytical and Multibody Modelling of a Quick-Release Hook Mechanism
  58. Altmetric Badge
    Chapter 57 Evolution of a Dynamic Model for Flexible Multibody Systems
  59. Altmetric Badge
    Chapter 58 Anti-hedonistic Mechatronic Systems
  60. Altmetric Badge
    Chapter 59 On the Use of Cable-Driven Robots in Early Inpatient Stroke Rehabilitation
Attention for Chapter 42: Tyre-Road Adherence Conditions Estimation for Intelligent Vehicle Safety Applications
Altmetric Badge

Citations

dimensions_citation
3 Dimensions

Readers on

mendeley
12 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Chapter title
Tyre-Road Adherence Conditions Estimation for Intelligent Vehicle Safety Applications
Chapter number 42
Book title
Advances in Italian Mechanism Science
Published by
Springer, Cham, January 2017
DOI 10.1007/978-3-319-48375-7_42
Book ISBNs
978-3-31-948374-0, 978-3-31-948375-7
Authors

Mojtaba Sharifzadeh, Francesco Timpone, Arash Farnam, Adolfo Senatore, Ahmad Akbari, Sharifzadeh, Mojtaba, Timpone, Francesco, Farnam, Arash, Senatore, Adolfo, Akbari, Ahmad

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 12 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 12 100%

Demographic breakdown

Readers by professional status Count As %
Researcher 4 33%
Student > Ph. D. Student 3 25%
Professor > Associate Professor 1 8%
Other 1 8%
Unknown 3 25%
Readers by discipline Count As %
Engineering 3 25%
Computer Science 2 17%
Business, Management and Accounting 1 8%
Unknown 6 50%