↓ Skip to main content

Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics

Overview of attention for book
Cover of 'Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Influence of Sample Preparation on Determined Nanomechanical Properties of Metastable Calcium Carbonate Polymorphs
  3. Altmetric Badge
    Chapter 2 Crystallization and Dissolution of Common Salts - Damage Potential to Porous Media
  4. Altmetric Badge
    Chapter 3 Torsional Shear Testing of Mortar
  5. Altmetric Badge
    Chapter 4 Comparative Tests of Strengthening Effects on Weak Mortars Consolidated with Various Agents
  6. Altmetric Badge
    Chapter 5 Novel Device for 4-Point Flexural Testing of Quasi-Brittle Materials During 4D Computed Tomography
  7. Altmetric Badge
    Chapter 6 Effects of Long-Term Aging on the Low-Cycle Fatigue Behavior of Inconel 718 Superalloy
  8. Altmetric Badge
    Chapter 7 Enhanced Young’s Modulus in Percolative Cementitious Composites Reinforced with Carbon Nanotubes
  9. Altmetric Badge
    Chapter 8 Behavior of Partially and Fully FRP-Confined Circularized Square Columns (CSCs) Under Axial Compression
  10. Altmetric Badge
    Chapter 9 Stress-Strain Behavior of Circular Concrete Columns Partially Wrapped with FRP Strips
  11. Altmetric Badge
    Chapter 10 Improving the Tribological Properties of Ti6Al4V Alloy with Multi-walled Carbon Nanotube Additions
  12. Altmetric Badge
    Chapter 11 Numerical Analysis of Delamination in Composite Structures Using Strain Measurements from Fiber Bragg Gratings Sensors
  13. Altmetric Badge
    Chapter 12 Combined Anisotropic Viscodamage-Viscoplasticity Model for Rock Under Dynamic Loading
  14. Altmetric Badge
    Chapter 13 Multiscale Defects Induced Criticality in Damage-Failure Transition Under Intensive Loading (Experimental and Theoretical Results)
  15. Altmetric Badge
    Chapter 14 An Approximate Solution for Plane Strain Rolling of Viscoplastic Sheets
  16. Altmetric Badge
    Chapter 15 Using the Upper Bound Technique for Calculating the Strain Rate Intensity Factor
  17. Altmetric Badge
    Chapter 16 Dimension Stability of Thin-Walled Parts from 3D Printed Composite Materials
  18. Altmetric Badge
    Chapter 17 Creep Degradation Processes in Tungsten Modified 9%Cr Martensitic Steel
  19. Altmetric Badge
    Chapter 18 Experimental Investigation of Cross-Laminated Timber Shear Wall Under Shear Force by Using Digital Image Correlation Method
  20. Altmetric Badge
    Chapter 19 Reinforcing Concrete with Carbon Nanotubes and Carbon Nanofibers: A Novel Method to Improve the Modulus of Elasticity
  21. Altmetric Badge
    Chapter 20 Flexural Strength Optimization in CNF Cement Based Nanocomposites with Tailored Electrochemical Impedance Properties
  22. Altmetric Badge
    Chapter 21 Usage of Composite Materials in Design of Recuperative Member with Respect to Buckling Phenomena
  23. Altmetric Badge
    Chapter 22 Optimization of Additive Manufactured Components Using Topology Optimization
  24. Altmetric Badge
    Chapter 23 Poro-Hyperelasticity: The Mechanics of Fluid-Saturated Soft Materials Undergoing Large Deformations
  25. Altmetric Badge
    Chapter 24 Effects of Machining and Heat and Surface Treatments on as Built DMLS Processed Maraging Steel
  26. Altmetric Badge
    Chapter 25 DMLS Built Maraging Steel Fatigue Response Investigated for Different Build Orientations and Allowance for Machining
  27. Altmetric Badge
    Chapter 26 Designing Future Materials with Desired Properties Using Numerical Analysis
  28. Altmetric Badge
    Chapter 27 Prediction of Interlaminar Shear Strength of Uni-Laminates Based on Fiber Bundle Composites
  29. Altmetric Badge
    Chapter 28 An Experimental Research of High Temperature Strain Localization and a Method for Non-touch Measurements at a High Temperature Experiments
  30. Altmetric Badge
    Chapter 29 DIC Assisted FCG Testing for Materials Used in Shale Gas Mining
  31. Altmetric Badge
    Chapter 30 Micro-scale Non-destructive Stress Measurement for Ultra-thin Glass Plates
  32. Altmetric Badge
    Chapter 31 Measurement of Displacement and Its Derivatives from a Phase Fringe Pattern
  33. Altmetric Badge
    Chapter 32 Evaluation of Calibration Performance by Conical Targets
  34. Altmetric Badge
    Chapter 33 Optical Method Applying to the Measure of Transverse Deformation
  35. Altmetric Badge
    Chapter 34 Experimental Study on Fatigue Performance of CFRP-RC Beams Under Variable Amplitude Overloads
  36. Altmetric Badge
    Chapter 35 Fatigue Crack Propagation Behavior of RC Beams Strengthened with Prestressed CFL
  37. Altmetric Badge
    Chapter 36 On the Fracture Mechanics of Prince Rupert’s Drops
  38. Altmetric Badge
    Chapter 37 A Further Exploration on Loading Strain Rate
  39. Altmetric Badge
    Chapter 38 Determination of Mode I and II Adhesion Toughness of Monolayer Thin Films by Circular Blister Tests
  40. Altmetric Badge
    Chapter 39 Semi-infinite Crack in Piece-Homogeneous Plane with Non-smooth Interface of Media
  41. Altmetric Badge
    Chapter 40 Probabilistic Assessment of the State of Welded Pipeline Elements and Pressure Vessels with Detected Corrosion-Erosion Defects
  42. Altmetric Badge
    Chapter 41 Creep Fracture Ductility of Cobalt-Based Superalloys
  43. Altmetric Badge
    Chapter 42 Fracture of Composite Material at Compression Along Two Parallel Cracks
  44. Altmetric Badge
    Chapter 43 Rate-Dependent Crack Propagation in Polyethylene
  45. Altmetric Badge
    Chapter 44 Improving the Reliability of Design of a Hinge Kit System Subjected to Repetitive Stresses
  46. Altmetric Badge
    Chapter 45 Investigation into the Breakdown of Continuum Fracture Mechanics at the Nanoscale: Synthesis of Recent Results on Silicon
  47. Altmetric Badge
    Chapter 46 Evolution of Size Distribution of Pores in Metal Melts at Tension with High Strain Rates
  48. Altmetric Badge
    Chapter 47 Particle-Based DEM Model for Simulating Brittle Cracks Evolution in Rock-like Materials During the Tensional Fracturing Process
  49. Altmetric Badge
    Chapter 48 Controlling Dynamic Fracture and Structural Disintegration
  50. Altmetric Badge
    Chapter 49 Degradation of the Strength of a Grain Boundary in Ni-Base Superalloy Under Creep-Fatigue Loading
  51. Altmetric Badge
    Chapter 50 Analysis of Fracture of Composites Loaded Along Cracks
  52. Altmetric Badge
    Chapter 51 Studying of Fracture of the Orthotropic Elastic and Visco-Elastic Plates with Periodic System of Collinear Cracks
  53. Altmetric Badge
    Chapter 52 Generalized Stress Intensity Factors Determination by Overdeterministic Method in Case of Bi-material Junction
  54. Altmetric Badge
    Chapter 53 Fatigue of Single-Crystal Gold Micro-specimen by Resonant Vibration
  55. Altmetric Badge
    Chapter 54 Dynamic Fracture and Fragmentation of Ice Materials
  56. Altmetric Badge
    Chapter 55 Collective Mechanical Behavior and Stability of a Group of Cracks in Brittle Solids
  57. Altmetric Badge
    Chapter 56 Analysis of Materials Systems Represented with Graphs
  58. Altmetric Badge
    Chapter 57 Numerical Issues Affecting the Eigenproblem Solution of Transversely Vibrating Segmented Structures
  59. Altmetric Badge
    Chapter 58 Development of Geometric Formulation of Elasticity
  60. Altmetric Badge
    Chapter 59 The Influence of Defects and Inclusions on Capacity for Work of Thin Plates
  61. Altmetric Badge
    Chapter 60 Limit of Ultra-high Strain Rates in Plastic Response of Metals
  62. Altmetric Badge
    Chapter 61 Scattering of Waves by a Shear Band
  63. Altmetric Badge
    Chapter 62 Finite Element Simulation of a Lead-Core Bearing Device Mechanical Response to a Near-Fault Ground Motion
  64. Altmetric Badge
    Chapter 63 Research on Optimization of Face Gear Grinding Machine Structure Design Based on Dynamic Performance of Machine Tool
  65. Altmetric Badge
    Chapter 64 Review of Thermal, Turbulent and Misalignment Effects on Hydrodynamic Journal Bearings
  66. Altmetric Badge
    Chapter 65 Autowave Plasticity. Localization and Collective Modes
  67. Altmetric Badge
    Chapter 66 Microstructure-Based Modelling and Digital Image Correlation Measurement of (Residual) Strain Fields in Austenitic Stainless Steel 316L During Tension Loading
  68. Altmetric Badge
    Chapter 67 A Study on the Effect of Component Geometry on Fatigue Property
  69. Altmetric Badge
    Chapter 68 Anatomic and Biomechanical Study to Guide in the Choice of Atlantoaxial Fixation Pattern
  70. Altmetric Badge
    Chapter 69 Challenges and Progress in Residual Stress Evaluation and Analysis at the Nanoscale
  71. Altmetric Badge
    Chapter 70 Shear Bands in Metallic Glasses: Atomic Transport, Propagation – and Relaxation Behavior
  72. Altmetric Badge
    Chapter 71 Plastic Deformation and Failure Mechanisms in Notched Nano-Scale Metallic Glass Specimens
  73. Altmetric Badge
    Chapter 72 On the Fracture Behavior of Bulk Metallic Glasses
  74. Altmetric Badge
    Chapter 73 Synthesis and Properties of Bulk Metallic Glass Composites
  75. Altmetric Badge
    Chapter 74 Surface Behavior of Metallic Glasses Under Irradiation
  76. Altmetric Badge
    Chapter 75 Shear Banding in Bulk Metallic Glass Matrix Composites with Dendrite Reinforcements
  77. Altmetric Badge
    Chapter 76 Origin of Embrittlement of Metallic Glasses
  78. Altmetric Badge
    Chapter 77 Crack Propagation in Bulk Metallic Glasses
  79. Altmetric Badge
    Chapter 78 Thermal and Mechanical Stability of Nano-Crystalline and Nano-Structured Metals
  80. Altmetric Badge
    Chapter 79 Fatigue Crack-Growth Properties of SPD-Metals
  81. Altmetric Badge
    Chapter 80 Factors Affecting Temperature Rise in Shear Bands in a Simulated CuZr Metallic Glass
  82. Altmetric Badge
    Chapter 81 Structure Modulation and Nanocrystallization of Metallic Glasses: How to Tune Mechanical Properties
  83. Altmetric Badge
    Chapter 82 The Size Effect of Spherical Indenter and Creep Behavior in Amorphous Alloy
  84. Altmetric Badge
    Chapter 83 Nanodiffraction Strain Mapping of Metallic Glasses During In Situ Deformation
  85. Altmetric Badge
    Chapter 84 Coarse Grained Models of Heterogeneous Plasticity Using the Discrete Element Method—Bulk Metallic Glasses and Beyond
  86. Altmetric Badge
    Chapter 85 Rejuvenation of Disorder-Containing Materials
  87. Altmetric Badge
    Chapter 86 Determination of Vibrations at Different Points in the Ground After the Passage of a Spherical Wave Through a Vibration-Absorbing Obstacle
  88. Altmetric Badge
    Chapter 87 The Direct-Integration Method for 3D Elastic Analysis of Transversally-Isotropic Nonhomogeneous Solids
  89. Altmetric Badge
    Chapter 88 Thermal and Thermoelastic State of Thermosensitive Structures Subject to Complex Heat Exchange
  90. Altmetric Badge
    Chapter 89 Analytical Solutions of Some Nonstationary Contact Problems with Moving Boundaries
  91. Altmetric Badge
    Chapter 90 Influence of Viscoelasticity Properties on Propagation of Two-Dimensional Non-stationary Waves in a Half-Plane
  92. Altmetric Badge
    Chapter 91 Non-stationary Dynamic Problems of Linear Viscoelasticity with a Constant Poisson’s Ratio
  93. Altmetric Badge
    Chapter 92 Transient Contact Problem for Liquid Filled Concentric Spherical Shells and a Rigid Barrier
  94. Altmetric Badge
    Chapter 93 Arbitrary Oriented Defects in Anisotropic Quarter Plane
  95. Altmetric Badge
    Chapter 94 Interphase Circular Inclusion in a Piecewise-Homogeneous Transversely Isotropic Space Under the Action of a Heat Flux
  96. Altmetric Badge
    Chapter 95 Electromagnetoelastic Diffusion in Anisotropic Continuum
  97. Altmetric Badge
    Chapter 96 An Analysis of Electrically Conducting and Magnetically Permeable Interface Crack in a Piezoelectromagnetic Bimaterial
  98. Altmetric Badge
    Chapter 97 Interaction of Antiplane Shear Waves with Elastic Fiber in the Presence of a Thin Interphase Piezoceramic Layer
  99. Altmetric Badge
    Chapter 98 The Averaged Dynamic Models of Bending and Longitudinal Vibrations for Elastic Sandwich Plates
  100. Altmetric Badge
    Chapter 99 Propagation of the Coupled Waves in the Electromagnetoelastic Thick-Walled Sphere
  101. Altmetric Badge
    Chapter 100 Influence of Residual Stress Caused by Cladding of Anticorrosion Layer in Nozzle Zone of RPV WWER-1000 on Results of Brittle Strength Evaluation
  102. Altmetric Badge
    Chapter 101 Development of the Theory of Multicomponent Media for Describing Dynamic Processes in Materials of Complex Rheology
Attention for Chapter 87: The Direct-Integration Method for 3D Elastic Analysis of Transversally-Isotropic Nonhomogeneous Solids
Altmetric Badge

Citations

dimensions_citation
3 Dimensions
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Chapter title
The Direct-Integration Method for 3D Elastic Analysis of Transversally-Isotropic Nonhomogeneous Solids
Chapter number 87
Book title
Proceedings of the First International Conference on Theoretical, Applied and Experimental Mechanics
Published by
Springer, Cham, June 2018
DOI 10.1007/978-3-319-91989-8_87
Book ISBNs
978-3-31-991988-1, 978-3-31-991989-8
Authors

Yuriy Tokovyy