↓ Skip to main content

Proceedings of the 4th International Conference on Industrial Engineering

Overview of attention for book
Cover of 'Proceedings of the 4th International Conference on Industrial Engineering'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Diesel Engine Preheating and Starting Simulation with Modelica Language
  3. Altmetric Badge
    Chapter 2 Processes Dynamic Characteristics in the Intake System of Piston Internal Combustion Engine
  4. Altmetric Badge
    Chapter 3 Calculated and Experimental Study of Free Vibrations of a Cylindrical Shell
  5. Altmetric Badge
    Chapter 4 Optimization of Parameters for Fuel Combustion Process of Diesel Working Cycle Improvement
  6. Altmetric Badge
    Chapter 5 Mathematical Models of Low-Temperature Gas Generator
  7. Altmetric Badge
    Chapter 6 Iterative Process of AFEM and Ideal Failure Models of Structures
  8. Altmetric Badge
    Chapter 7 Analysis of Resonator Installation Effect in Intake System of the Diesel Engine on Parameters of Gas Exchange Quality
  9. Altmetric Badge
    Chapter 8 Calculated-Experimental Estimation of Residual Pipeline Resource for Long-Term Operation
  10. Altmetric Badge
    Chapter 9 Dynamic Problem of Direct Piezoelectric Effect for the Circular Multilayer Plate
  11. Altmetric Badge
    Chapter 10 Dynamic Diagnostics of Limiting State of Milling Process Based on Poincaré Stroboscopic Mapping
  12. Altmetric Badge
    Chapter 11 Calculation-Analytical Estimation of the Working Cycle Parameters of the Crankless and Crank Engines Under Similar Loading Conditions
  13. Altmetric Badge
    Chapter 13 Dislocation Model of Wheel–Rail Interaction with Locomotive Lateral Fluctuations
  14. Altmetric Badge
    Chapter 14 Study of Oscillating Process of Harp Screens
  15. Altmetric Badge
    Chapter 15 To Issue of Application of Method of Dynamic Mechanical Analysis (DMA) to Determine Viscoelastic Properties and Heat Generation in Rubber Elements of Solid Tires
  16. Altmetric Badge
    Chapter 16 Modeling of Dynamic and Economical Characteristics of Life-Saving Device with Flywheel Energy Storage
  17. Altmetric Badge
    Chapter 17 Experimental Studies on Influence of Natural Frequencies of Oscillations of Mechanical System on Angular Velocity of Pendulum on Rotating Shaft
  18. Altmetric Badge
    Chapter 18 Analysis of Possibilities to Reduce Energy Consumption of Elevator Systems
  19. Altmetric Badge
    Chapter 19 Results of Investigating Vibration Load at Human Operator’s Seat in Utility Machine
  20. Altmetric Badge
    Chapter 20 Deformation of Thin Elastic Rod Under Large Deflections
  21. Altmetric Badge
    Chapter 21 Selection of Incidence Angle at Designing Blade Row of Compressors and Turbines
  22. Altmetric Badge
    Chapter 22 Synthesis of Controlling the Movement of Digging Mechanisms of Excavators on the Basis of Inverse Dynamic Problems
  23. Altmetric Badge
    Chapter 23 Damping Ratio and Natural Frequency of Dynamic System in Milling
  24. Altmetric Badge
    Chapter 24 Models of Fatigue Fracture Under Cyclic Loading Pistons of Internal Combustion Engines
  25. Altmetric Badge
    Chapter 25 Investigation of Units Condition of Rotor-Type Milling Machines Based on Vibration Analysis
  26. Altmetric Badge
    Chapter 26 Mathematical Modeling of Wear of Cutter on Back Edge by Taking into Account Beating and Kinematic Perturbations
  27. Altmetric Badge
    Chapter 27 Determination of Critical Speed of Rail Vehicle as Mechanical System with Nonlinear Constraints
  28. Altmetric Badge
    Chapter 28 Influence of Contact Area of Additional Elements on Frequency Spectrum Splitting in Cylindrical Shells
  29. Altmetric Badge
    Chapter 29 Selection of Rational Technological Modes and Parameters of Underwater Waterjet Cutting
  30. Altmetric Badge
    Chapter 30 Voxel and Finite Element Modeling of the Ceramic–Polymer Composite Panel for Ballistic Impact Description
  31. Altmetric Badge
    Chapter 31 Common Problems and Prospects of Crankshaft (Eccentric) Machinery Usage in Sawmilling
  32. Altmetric Badge
    Chapter 32 Drill Bit Self-oscillation in Cutting
  33. Altmetric Badge
    Chapter 33 Using Local Coordinate Systems for Dimensional Analysis in the Machining
  34. Altmetric Badge
    Chapter 34 Research of Nature of Interaction of Fuel Spray with Wall of Combustion Chamber of Overload Diesel Engine on Unique ‘Injection’ Research Installation
  35. Altmetric Badge
    Chapter 35 Numerical Simulation of Conjugate Heat Transfer in Non-regular Mode of Cooling High-Temperature Metal Cylinder by Gas–Liquid Medium in Circular Channel
  36. Altmetric Badge
    Chapter 36 Amplitude–Frequency Method of Control of a Mobile Drilling Machine with Hydraulic Drive with Dependent Tool Advance
  37. Altmetric Badge
    Chapter 37 Control of Damping Process in System of Vibration Isolation
  38. Altmetric Badge
    Chapter 38 Estimation of Energy Efficiency of Oscillations of Rotors on Radial Fluid Film Bearings
  39. Altmetric Badge
    Chapter 39 Method of Investigating Dynamic Operating Modes of Electrohydraulic Drive Systems with Movable Boundaries of Working Fluids
  40. Altmetric Badge
    Chapter 40 Self-synchronized Controlled Vibration Drive with Automated Oscillation Parameters Monitoring System for High-Tech Equipment
  41. Altmetric Badge
    Chapter 41 Analysis of Effect of Internal Pressure on Natural Frequencies of Bending Vibrations of a Straight Pipe with Fluid
  42. Altmetric Badge
    Chapter 42 Experimental Modular Unit for Testing Nodes of Air Suspension with Combined Amortization
  43. Altmetric Badge
    Chapter 43 Calculation of Kinematic Characteristics of Internal Combustion Engine Valve Gear
  44. Altmetric Badge
    Chapter 44 Impact of Design Parameters on the Efficiency of Loading Organs with Gathering Stars of the Roadheaders
  45. Altmetric Badge
    Chapter 45 Virtual Prototyping Experience of the Coriolis Flow Meter
  46. Altmetric Badge
    Chapter 46 Theoretical Foundations of Optimal Two-Step Control of Suspension Stiffness of Transport Vehicle in Oscillation Cycle
  47. Altmetric Badge
    Chapter 47 Potential Vibration Isolation Qualities of Suspensions with Two-Step Stiffness Control in Oscillation Cycle
  48. Altmetric Badge
    Chapter 48 Fatigue Life Prediction of Track Link of a High-Speed Vehicle
  49. Altmetric Badge
    Chapter 49 Hydroelastic Response of Three-Layered Plate Interacting with Pulsating Viscous Liquid Layer
  50. Altmetric Badge
    Chapter 50 Experimental Study of Spark-Ignited Two-Stroke Heavy Fuel Engine
  51. Altmetric Badge
    Chapter 51 Application of Experimental Modal Analysis for Identification of Laminated Carbon Fiber-Reinforced Plastics Model Parameters
  52. Altmetric Badge
    Chapter 52 Reducing the Level of Vibration in Two-Stream Spur Gear
  53. Altmetric Badge
    Chapter 53 Analysis of Application of Pre-screwed Auger Wheels for Operative Increasing of Throughput Capacity of Oil Pipelines
  54. Altmetric Badge
    Chapter 55 Assurance of Accuracy of Longitudinal Section of Profile Surfaces Milled at High Feeds
  55. Altmetric Badge
    Chapter 56 Dynamics of Rotary Milling According to Group Scheme of Obtaining Discontinuous Chips
  56. Altmetric Badge
    Chapter 57 Modeling Hydrodynamic Processes in the Vortex Generator
  57. Altmetric Badge
    Chapter 58 The Substantiation of Necessity to Modernize the Gas Pipelines Gas Cooling System
  58. Altmetric Badge
    Chapter 59 Modeling Quasi-static Gait of a Person Wearing Lower Limb Exoskeleton
  59. Altmetric Badge
    Chapter 60 Modeling of Thin-Walled Cylindrical Part Turning Process Dynamics
  60. Altmetric Badge
    Chapter 61 Investigation of Controlled Vibratory Drilling Dynamics with Variable Velocity Feedback Gain
  61. Altmetric Badge
    Chapter 62 Justification of Program for Accelerated Tests of Aircraft Auxiliary Gas Turbine Engine
  62. Altmetric Badge
    Chapter 63 Longitudinal Fin Effect on Effectiveness of Double Pipe Heat Exchanger
  63. Altmetric Badge
    Chapter 64 Modeling and Dynamic Analysis of Adjustable Axial Flow Divider
  64. Altmetric Badge
    Chapter 65 Study of Combustion Stroke of Double-Chamber Explosive Gas Forming Device
  65. Altmetric Badge
    Chapter 66 Influence of Elastic–Plastic Transformation of Mechanorheological Model on Impact Duration
  66. Altmetric Badge
    Chapter 67 Mathematical Modeling of Oscillations of the Associated Transport and Technological Complex with the Use of the Graph Theory
  67. Altmetric Badge
    Chapter 68 Modeling of Seismic Processes in Buildings at Presence of Elastoplastic Seismic Insulators
  68. Altmetric Badge
    Chapter 69 Planning an Experiment in Assessing Altitude–Velocity Characteristics of Aviation Gas Turbine Engine
  69. Altmetric Badge
    Chapter 70 Damping Accounting in Calculating Problem of Thin-Walled Rod of Closed Profile
  70. Altmetric Badge
    Chapter 71 Application of Combined Technique for Chatter Prediction in 5-Axis Milling
  71. Altmetric Badge
    Chapter 72 On Bending of Rod Under Strong Longitudinal Compression
  72. Altmetric Badge
    Chapter 73 Analysis of Forced Bending Vibrations of Straight Pipe with Flowing Fluid
  73. Altmetric Badge
    Chapter 74 Simulation of Flows in Bottom Field of an External Expansion Annular Nozzles
  74. Altmetric Badge
    Chapter 75 On the Economic Viability of Reusable Space-Rocket Systems Use to Deliver Payloads to Satellite Orbit
  75. Altmetric Badge
    Chapter 76 Mechanics of Uniform Motion of a Rigid Body
  76. Altmetric Badge
    Chapter 77 Development of Device for Evaluating the Performance of Rolling Bearings
  77. Altmetric Badge
    Chapter 78 Mathematical Model for Determining Depth of Deformation Penetration While Pipe Punching
  78. Altmetric Badge
    Chapter 79 Investigation of Kinetics of Wear in Friction Pair of Type “Undercuff Neck–Cuff Edge”
  79. Altmetric Badge
    Chapter 80 Qualitative Research of Combined Friction in Contact of Elastic Wheel with Solid Surface
  80. Altmetric Badge
    Chapter 81 Modeling of Various Types of Surface Wear
  81. Altmetric Badge
    Chapter 82 Magnetic Nanodisperse Oils Based on Organosilicone Fluids: Lubricant Properties of Oils with Different Additives
  82. Altmetric Badge
    Chapter 83 Four-Ball Machine Friction Unit Geometrical Parameters
  83. Altmetric Badge
    Chapter 84 Cylindrical Shell Edges Bending Process Technological Features
  84. Altmetric Badge
    Chapter 85 Magnetic Nanodispersed Lubricating Oils Based on Organosilicon Fluids: Basics of the Technology
  85. Altmetric Badge
    Chapter 86 Measurement Technique for Temperature of Friction Lining of Brake Roller for Pallet Flow Rack
  86. Altmetric Badge
    Chapter 87 Assessing the Impact Strength of Blade Edges of Forestry Machinery Operating Components
  87. Altmetric Badge
    Chapter 88 Wearing of MR Wire Vibration Insulation Material Under Random Load
  88. Altmetric Badge
    Chapter 89 Experimental Evaluation of Influence of Tool Wear on Quality of Turning
  89. Altmetric Badge
    Chapter 90 Development of Measures to Prevent Surging Turbochargers of Cars
  90. Altmetric Badge
    Chapter 91 Semigraphical Method of Motor Oils Thermal-Oxidative Stability Index Control
  91. Altmetric Badge
    Chapter 92 Comparison Method of Engine Oils on Thermooxidizing Stability Indicators
  92. Altmetric Badge
    Chapter 93 Electrometric Control Method for Processes Proceeding at Boundary Sliding Friction
  93. Altmetric Badge
    Chapter 94 Radial Friction Bearings Conditioned by Melt
  94. Altmetric Badge
    Chapter 95 Application of Bio-oil in Hydraulic Systems
  95. Altmetric Badge
    Chapter 96 On Support of Optimization Criterion of Recovery Process of Motor Oils
  96. Altmetric Badge
    Chapter 97 Determining the Parameters Effecting the Work of the Lubricants Supplying System at Wide-Strip Hot Rolling
  97. Altmetric Badge
    Chapter 99 Contact of Rigid Rough Surface Through Polymer Coating Layer
  98. Altmetric Badge
    Chapter 100 Relative Contact Area by Indentation and Flattening of Rough Surfaces Spherical Asperities
  99. Altmetric Badge
    Chapter 101 Influence of Friction Geo-modifiers on HTHS Viscosity of Motor Oils
  100. Altmetric Badge
    Chapter 102 Application of Method of Molecular Dynamics (MMD) for Modeling the Process of Dislocation of Hardening of Surface Zone
  101. Altmetric Badge
    Chapter 104 Numerical Model of Mechanical Interaction of Rough Surfaces of Journal Bearings of Piston Engine
  102. Altmetric Badge
    Chapter 105 Fracture of TiC/a-C(:H) Coatings in Friction Contact
  103. Altmetric Badge
    Chapter 106 Study of TiC/a-C(:H) Coatings Before and After Friction by Nanoindentation
  104. Altmetric Badge
    Chapter 107 Research Results of Influence of Synthetical Additive on Temperature Parameters of Moto Oils
  105. Altmetric Badge
    Chapter 108 Effect of Adhesion Properties of Frost-Resistant Rubbers on Sliding Friction
  106. Altmetric Badge
    Chapter 109 Control Method of Thermo-oxidative Stability Factors of Synthetic Motor Oil
  107. Altmetric Badge
    Chapter 110 Ways of Increasing Wear Resistance and Damping Properties of Radial Bearings with Forced Lubricant Supply
  108. Altmetric Badge
    Chapter 112 On Proof of the Generalized Lagrange Variational Principle
  109. Altmetric Badge
    Chapter 113 New Method of Tribological Testing Lubricants and Antifrictional Additives
  110. Altmetric Badge
    Chapter 114 Friction and Vibration in Journal Bearings Operating with Nanofluids: Experimental Results
  111. Altmetric Badge
    Chapter 115 Optimization of Piston Compressor Geometric Size Using the Genetic Algorithm Method
  112. Altmetric Badge
    Chapter 116 Development of Method and Instruments to Identify Efficiency of Tracked Vehicles
  113. Altmetric Badge
    Chapter 117 Modelling of Mobile Nonlinear Frictional Systems
  114. Altmetric Badge
    Chapter 118 Forecast of Frictional Bonds Abnormal Status
  115. Altmetric Badge
    Chapter 119 Modelling of Cutting Forces in Ball-End Milling
  116. Altmetric Badge
    Chapter 120 Simulation of Ion Transfer During Electrochemical Shaping by Ultrashort Pulses
  117. Altmetric Badge
    Chapter 122 Research of Characteristics and Parameters of Cycloidal Gear
  118. Altmetric Badge
    Chapter 123 Technological Aspects of Quality and Renovation of Machines
  119. Altmetric Badge
    Chapter 124 Raster Marking of Surfaces with Elastic Coating
  120. Altmetric Badge
    Chapter 125 Cutting Teeth of Non-involute Gears of the Cylinder–Conical Internal Transmission of Internal Gearing
  121. Altmetric Badge
    Chapter 126 Mathematical Model of State of Stress in Cutting Area During Synthegran Machining
  122. Altmetric Badge
    Chapter 127 Specificity of Cutting Tool Wear in Processing of Polymer Composite Materials
  123. Altmetric Badge
    Chapter 128 Diagnostics and Forecasting of Defects in Rotation Details
  124. Altmetric Badge
    Chapter 129 Influence of Thermoplastics Advanced Ultrasonic Treatment on Treated Surface Roughness After Turning
  125. Altmetric Badge
    Chapter 130 Solid Modeling in Autodesk Inventor at Initial Stage of Training of Specialists in Field Mechanical Engineering
  126. Altmetric Badge
    Chapter 132 Influence of Chemical Composition of Tough-to-Machine Materials on Grinding Technologies
  127. Altmetric Badge
    Chapter 133 Neural Modeling of the Energy Efficiency Factor for Recuperators (Heat Exchangers) Using Impinging Jets for the Metallurgical Productions and Machine Building
  128. Altmetric Badge
    Chapter 134 Determination of Optimal Conditions for Flat Grinding of 20 Kh Steel Workpieces
  129. Altmetric Badge
    Chapter 135 Increased Durability of Flexible Gear of Harmonic Drive Due to Flexible Bearing Modification
  130. Altmetric Badge
    Chapter 136 Estimation of Geometrical Torsion Rigidity of Triangular and Rectangular Sections Using Interpolation Method
  131. Altmetric Badge
    Chapter 137 Determination of Maximum Deflection of Elastically Isotropic Plates with Combined Boundary Conditions Using Scaling Method
  132. Altmetric Badge
    Chapter 138 Analysis of Methods for Increase of Soundproofing Structure Efficiency for Noise Reduction During Technological Processes of Machinery Production
  133. Altmetric Badge
    Chapter 139 Question of Creation of General Theory of Deep Holes Machining
  134. Altmetric Badge
    Chapter 140 Overhaul-Period Renewal of Cement Kiln Rotary Drive
  135. Altmetric Badge
    Chapter 141 Model of Failure Due to Wear Process for Mill Rolls Universal Spindle Couplings
  136. Altmetric Badge
    Chapter 142 General Principles and Design Strategy of Optimal Reconfigurable Manufacturing Systems
  137. Altmetric Badge
    Chapter 143 Use of Vibro-acoustic Monitoring for Stabilization Stress–Strain State of Surface Layer of Workpiece During Cutting
  138. Altmetric Badge
    Chapter 144 Model and Analysis of the Grinding Wheels Transformation in Double-Disk Grinding
  139. Altmetric Badge
    Chapter 145 New Generation Magnetorheological, Magnetodynamic, and Ferrofluid Control Devices with Nonstationary Electromagnetic Fields
  140. Altmetric Badge
    Chapter 146 Technological Peculiarities of Chemical Heat Treatment of Alloyed Steel Gears
  141. Altmetric Badge
    Chapter 147 Synthesis of Nanostructured Composite Coatings in Arc Discharge Plasma
  142. Altmetric Badge
    Chapter 148 Development of Methodological Recommendations for Selection of Flexible Abrasive Tool by Performance Indicator
  143. Altmetric Badge
    Chapter 149 Structural and Kinematic Analysis of a Shaper Linkage with Four-Bar Assur Group
  144. Altmetric Badge
    Chapter 150 Dependence of Roughness Parameters of Workpiece Surface on Structural Characteristics of Grinding Discs
  145. Altmetric Badge
    Chapter 151 State of Problem of Technological Support of Workpiece Surface Quality During Grinding
  146. Altmetric Badge
    Chapter 152 Physical and Mathematical Model of the Process of Face Grinding of Rails with Abrasive Wheels Operating at Speed of 50 m/s
  147. Altmetric Badge
    Chapter 153 Chip Formation Mechanism at Metal Grinding
  148. Altmetric Badge
    Chapter 154 Monitoring of Grinding Process with Help of Automatic Measuring Complex
  149. Altmetric Badge
    Chapter 155 Intensification of Technical Grinding Modes by Managing Physical Processes of Chip Formation
  150. Altmetric Badge
    Chapter 156 Tools for Electrical-Discharge Hole Drilling
  151. Altmetric Badge
    Chapter 157 Specifics of Reaming Allowances of Different Materials with Indexable Throw-Away Inserts
  152. Altmetric Badge
    Chapter 158 Experimental Optimization of Cutting Modes for Milling Based on Vibroacoustic Analysis
  153. Altmetric Badge
    Chapter 159 Selection of Priority Production Technology Based on Comparative Evaluation of the Oil and Gas Equipment Working Resource
  154. Altmetric Badge
    Chapter 160 Statistical Processing Method of Cylinder Measurement Results
  155. Altmetric Badge
    Chapter 161 Shafts Reliability Assessment in Accordance with Criteria of Fatigue Strength Under Random Load Conditions
  156. Altmetric Badge
    Chapter 162 Theoretical Foundations of Vibration Processing Modeling
  157. Altmetric Badge
    Chapter 163 Modeling Stress State Carbide Dies for Hexagonal Rods Production
  158. Altmetric Badge
    Chapter 164 Automation of Technological System Diagnostics by Parameters of Quality of Surfaces of Machined Parts
  159. Altmetric Badge
    Chapter 165 Computer-Aided Design of Die Tooling for Large Parts of Airfoil Profiles
  160. Altmetric Badge
    Chapter 166 Determining Precessional Gearboxes Efficiency of Manual Pipeline Valve Drives
  161. Altmetric Badge
    Chapter 167 Engineering Calculation of Axial Force Acting on Rotor of Electric Pumping Unit of Space Thermal Regulation Systems
  162. Altmetric Badge
    Chapter 168 Assurance of Quality Indices of Technological Processes of Form-Shaping During Preproduction Stage
  163. Altmetric Badge
    Chapter 169 Investigation of Cutting Processes and Surface of Plastic Deformation in Environment of LCTE with Nanosize Antifriction Particles
  164. Altmetric Badge
    Chapter 170 Choosing Transmission Gearset for Agricultural Aggregates Based on Energy Consumption
  165. Altmetric Badge
    Chapter 171 Energy and Fuel Consumption of Agricultural Aggregate
  166. Altmetric Badge
    Chapter 172 Effect of Tool-Operating Mode on Circularity Deviation in Multilobed Turbine Rotor Journal Restoration with Location on Bearing Bottom Half
  167. Altmetric Badge
    Chapter 173 Improved Axis Determination Method for Calculation of Virtual Pitch Thread Diameter Using a Point Cloud from CMM
  168. Altmetric Badge
    Chapter 174 SPH Modeling and Experimental Study of Unidirectional Fiber-Reinforced Composite Cutting
  169. Altmetric Badge
    Chapter 175 Strengthening of Low-Alloyed Steels by Carbides During Carbon-Black-Gas Carburizer Cementation
  170. Altmetric Badge
    Chapter 176 Dynamics of Spindle Assembly Metal-Cutting Machine Tool with Anisotropic Elastic Support
  171. Altmetric Badge
    Chapter 177 Informative Value of Measurements for Quality Management of Auto Parts
  172. Altmetric Badge
    Chapter 179 Methodics of Quality of Hydroabrasive Waterjet Cutting Machinability Assessment
  173. Altmetric Badge
    Chapter 180 Substantiation of Structure and Basic Design Parameters of Devices for Orienting Powered Support Relatively to Face Conveyor in Formation Plane
  174. Altmetric Badge
    Chapter 181 SPG Simulation of Free Orthogonal Cutting for Cutting Forces Prediction
  175. Altmetric Badge
    Chapter 182 Structural Risk Analysis as Basis for Quality Control of Metallurgical Systems
  176. Altmetric Badge
    Chapter 183 Use of Dynamic Programming Method to Design for Optimal Performance of Grinding Cycles
  177. Altmetric Badge
    Chapter 184 Modeling Relationship Between Different Stages of Cylindrical Grinding Process with Axial Feed in Reversal Zones
  178. Altmetric Badge
    Chapter 185 Profile Gear Grinding Temperature Determination
  179. Altmetric Badge
    Chapter 186 Development of Complex of Performance Indicators of a Flexible Abrasive Tool for Assessing the Effectiveness of Application
  180. Altmetric Badge
    Chapter 187 Renovation Repair of Trunk Pipeline While Operation
  181. Altmetric Badge
    Chapter 188 Development of Advanced Technologies for Secondary Use of Thermal Energy
  182. Altmetric Badge
    Chapter 189 Development of Mathematical Model of Material Removal Calculation for Combined Grinding Process
  183. Altmetric Badge
    Chapter 190 Method for Compensation of Radius and Shape of Spherical Probe When Measuring Complex Surfaces with CMMs
  184. Altmetric Badge
    Chapter 191 Magnetic Inspection for Assessing the Uniformity of Flange Joints Bolt Tightening
  185. Altmetric Badge
    Chapter 192 Research of Temperature Phenomena During Machining Surface Plastic Deformation of Detail
  186. Altmetric Badge
    Chapter 193 Neural Network Modeling and Prediction of Adhesion of Coatings Applied by Wire Tool
  187. Altmetric Badge
    Chapter 194 Mechanism for Flow Forming of Cylindrical Workpiece
  188. Altmetric Badge
    Chapter 195 Study on Tribological Characteristics of High Entropy High-Speed Steels in Conditions of Dry Friction on Structural Steel
  189. Altmetric Badge
    Chapter 196 Assurance of Quality Characteristics for Electric Weld Pipe Mill Roll
  190. Altmetric Badge
    Chapter 197 Correlation and Regression Method of Centrifugal Pump Geometry Optimization
  191. Altmetric Badge
    Chapter 198 Optimization of Flows in Jet-Film Contact Devices
  192. Altmetric Badge
    Chapter 199 Multiphysics Simulation of Electromagnetic Forming of Aluminum Alloy Tubes
  193. Altmetric Badge
    Chapter 200 Predictive Modeling of Scribing Brittle Material Using Diamond Tool with Improved Geometry
  194. Altmetric Badge
    Chapter 201 Packing Compaction Algorithm for Rectangular Cutting and Orthogonal Packing Problems
  195. Altmetric Badge
    Chapter 203 Method of Energy Efficiency Increase of Low Power Radial Impeller Micromachines
  196. Altmetric Badge
    Chapter 204 Separation Efficiency of the Heat–Mass Transfer Apparatuses with Jet-Film Contact Devices
  197. Altmetric Badge
    Chapter 205 Methodology for Automated Design of Optimum Cylindrical Broach Structures Developed by Total of Criteria
  198. Altmetric Badge
    Chapter 206 Forming and Selection Technique for Optimal Configuration of Form-Shaping System for Multiple-Axis Machining
  199. Altmetric Badge
    Chapter 207 Rolling of Refractory Metals on Four-Roll Passes Rolling Mills
  200. Altmetric Badge
    Chapter 208 Dependences of Blanks Density from Pressing Force and Packing Density of Molybdenum and Tungsten Powders
  201. Altmetric Badge
    Chapter 209 Experimental Installation for Analysing the Dynamics of Cutting Forces and Vibrations at High Frequencies of Machine Spindle Rotation
  202. Altmetric Badge
    Chapter 210 System Approach and Multivariance of Screw Surface Profiling
  203. Altmetric Badge
    Chapter 211 Practice of Dimensional Modeling of Assembly Operations Using Static Compensators
  204. Altmetric Badge
    Chapter 212 Computer-Aided Algorithm for Nonlinear Optimization of Pre-machining Using Measuring Instrument
  205. Altmetric Badge
    Chapter 213 Verification of Finite Element Model of Deformation of Laboratory Sample for Mechanical Tests by Method of Digital Images Correlation
  206. Altmetric Badge
    Chapter 214 Impact Impulse Research During Ice Navigation with Computer Modeling
  207. Altmetric Badge
    Chapter 215 Estimation of Influence Character of Installation Loads on Degree of Corrosive Wear of Column Apparatus
  208. Altmetric Badge
    Chapter 216 Radiation Individual Control Method in Engineering
  209. Altmetric Badge
    Chapter 217 Technology of Creation of Three-Dimensional Model of Tractor Transmission in Program Package “Universal Mechanism”
  210. Altmetric Badge
    Chapter 218 Elastic Toroidal Wheel Rolling with Side Slip
  211. Altmetric Badge
    Chapter 219 To the Calculation of the Coefficient of Stock of the Clutch
  212. Altmetric Badge
    Chapter 220 Efficiency of Application Self-blocked Cross Axle Screwball Differential at Car 4 × 4 Movement on Not Deformable Base Surface
  213. Altmetric Badge
    Chapter 221 Influence of Uneven Braking of Running Wheels on Stress–Strain State of Crane Metal Structure
  214. Altmetric Badge
    Chapter 222 Lifting Mechanism with Ribbon Brake
  215. Altmetric Badge
    Chapter 223 Increasing Engine Power by Applying Water Injection
  216. Altmetric Badge
    Chapter 224 Experimental and Numerical Investigation of Influence of Hydrogen Addition to Hydrocarbon Fuel on Wankel Rotary Engine Performance
  217. Altmetric Badge
    Chapter 226 Synthesis of Main Parameters and Experimental Approbation of Test Bench for Study of Working Processes of Intermediate Belt Conveyor Drive
  218. Altmetric Badge
    Chapter 227 Theoretical Methods for Precision Increment of Earthwork Made by Power Shovel Actuator
  219. Altmetric Badge
    Chapter 228 Three-Position Solenoid Valve for Pneumatic Systems of Trucks
  220. Altmetric Badge
    Chapter 229 Investigation of Soil Destruction by Trench Chain Excavator Cutting Element Process
  221. Altmetric Badge
    Chapter 231 New Roller Testing Unit for Vehicles
  222. Altmetric Badge
    Chapter 232 Modern State and Development of Grader Blades for Earth Moving and Snow Removal
  223. Altmetric Badge
    Chapter 233 Optimizing Consumption of Gas Fuel Using Static Method of Tuning Automobile Gas-Cylinder Equipment
  224. Altmetric Badge
    Chapter 234 Method and Means for Shutting Off Individual Cyclic Feeds of ICE and Their Use for Measuring ICE Speed and Load Characteristics
  225. Altmetric Badge
    Chapter 235 Repair Kit Application with Spring Insert in Silentblock of Amortizor
  226. Altmetric Badge
    Chapter 236 Methodological Aspects of Diagnostics of Electric Gasoline Pumps in Operation of Automobiles
  227. Altmetric Badge
    Chapter 237 Optimal Design of Steel Structure of Conveyor with Suspended Belt
  228. Altmetric Badge
    Chapter 238 Determination of Scope of Two-Arm Concrete Placing Booms
  229. Altmetric Badge
    Chapter 239 Hardware Implementation of Automatic Control System for New Generation Magnetorheological Supports
  230. Altmetric Badge
    Chapter 240 Microturbine with Heat Exchanger with Regeneration Ratio Equal 95%
  231. Altmetric Badge
    Chapter 241 Study on Structure and Kinematics of Quick-Return Mechanism with Four-Bar Assur Group
  232. Altmetric Badge
    Chapter 242 Optimization of Maintenance Service Parameters on the Example of Motor Transport Company Located in the North-West Region of the Russian Federation
  233. Altmetric Badge
    Chapter 244 Operation Parameters Matching for Main Mechanisms of Open-Pit Excavators Employed in Rock Excavation
  234. Altmetric Badge
    Chapter 245 Distribution of Consumed Power Between Drives of Main Mechanisms in Open-Pit Excavators During the Process of Rock Excavation
  235. Altmetric Badge
    Chapter 246 Research of Dynamics of Hydraulic Loader Crane in Case of Conjoint Movement of Sections
  236. Altmetric Badge
    Chapter 247 Selection of Mixers for Preparation of Quality Building Mixtures
  237. Altmetric Badge
    Chapter 248 Hydraulic-Drive-Relieving Device for Road Construction Machines
  238. Altmetric Badge
    Chapter 249 Improvement of Acoustic Characteristics of Motor Vehicle Intake System Based on Calculation and Experimental Research
  239. Altmetric Badge
    Chapter 250 Evaluating the Effectiveness of the Cable Excavator Bucket Swing Mechanism
  240. Altmetric Badge
    Chapter 251 Improving the Construction of Magnetic Clutch Amplifiers of Locomotive Wheels with Rails
  241. Altmetric Badge
    Chapter 252 Technique of Increasing Passenger Comfort by Ensuring Rational Parameters of Flexural Stiffness of Bodies of Passenger Cars
  242. Altmetric Badge
    Chapter 253 Features of Decision-Making Simulation When Designing Locomotive Underframe Part
  243. Altmetric Badge
    Chapter 254 Modernization of Gas Purifying System in Bus Methane Feed System
  244. Altmetric Badge
    Chapter 255 Hyperbolic Steering for Tracked Vehicles
  245. Altmetric Badge
    Chapter 257 Choice of Destruction Criteria of Cylinder Heads of Piston Engines
  246. Altmetric Badge
    Chapter 258 Design of the Inductor as Knot of the Electromechanical Converter with a Secondary Discrete Part
  247. Altmetric Badge
    Chapter 259 Welding and Build-Up Technologies at Dredge Scooping Pin Manufacture and Renovation
  248. Altmetric Badge
    Chapter 260 Investigation of Wire Feed Control Channel in Additive Manufacturing Unit
  249. Altmetric Badge
    Chapter 261 Measurement of Residual Stresses in Thin-Sheet Welded Constructions of Low-Alloyed Steel
  250. Altmetric Badge
    Chapter 262 Filler Wire-Feeding Device
  251. Altmetric Badge
    Chapter 263 Kinetics of Contact Interaction Between Dissimilar Solid Materials by Pressure Welding with Heating
  252. Altmetric Badge
    Chapter 264 Determination of Functional Relation Between Parameters of Weld Penetration Shape and Measurable Output Variables in Electron-Beam Welding Process
  253. Altmetric Badge
    Chapter 265 Computer Modeling of Residual Stresses and Strains at Arc Welding by Modulated Current
  254. Altmetric Badge
    Chapter 266 Study on the Dispersion of Concentrator Geometric Parameters in Fillet-Welded Joints
  255. Altmetric Badge
    Chapter 267 Numerical Analysis of Surface Formation of Titanium Parts During Direct Laser Deposition
  256. Altmetric Badge
    Chapter 268 Optimization of High-Speed Direct Laser Deposition Regime Parameters in Titanium Blades Production
  257. Altmetric Badge
    Chapter 269 Tungsten Electrode Fracture in Submerged Arc Welding Process
Attention for Chapter 231: New Roller Testing Unit for Vehicles
Altmetric Badge

Citations

dimensions_citation
7 Dimensions

Readers on

mendeley
1 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Chapter title
New Roller Testing Unit for Vehicles
Chapter number 231
Book title
Proceedings of the 4th International Conference on Industrial Engineering
Published by
Springer, Cham, May 2018
DOI 10.1007/978-3-319-95630-5_231
Book ISBNs
978-3-31-995629-9, 978-3-31-995630-5
Authors

I. P. Troyanovskaya, I. Yu. Novikova, I. S. Zhitenko, Troyanovskaya, I. P., Novikova, I. Yu., Zhitenko, I. S.

Mendeley readers

Mendeley readers

The data shown below were compiled from readership statistics for 1 Mendeley reader of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 1 100%

Demographic breakdown

Readers by professional status Count As %
Professor 1 100%
Readers by discipline Count As %
Engineering 1 100%