↓ Skip to main content

First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018

Overview of attention for book
Cover of 'First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018'

Table of Contents

  1. Altmetric Badge
    Book Overview
  2. Altmetric Badge
    Chapter 1 Fresh and Hardened Properties of 3D Printable Geopolymer Cured in Ambient Temperature
  3. Altmetric Badge
    Chapter 2 Evolution of Concrete/Formwork Interface in Slipforming Process
  4. Altmetric Badge
    Chapter 3 Experience in Online Modification of Rheology and Strength Acquisition of 3D Printable Mortars
  5. Altmetric Badge
    Chapter 4 A Framework for Performance-Based Testing of Fresh Mixtures for Construction-Scale 3D Printing
  6. Altmetric Badge
    Chapter 5 Characterization of 3D Printing Mortars Made with OPC/CSA Mixes
  7. Altmetric Badge
    Chapter 6 Rheological and Water Transport Properties of Cement Pastes Modified with Diutan Gum and Attapulgite/Palygorskite Nanoclays for 3D Concrete Printing
  8. Altmetric Badge
    Chapter 7 Rheological Control of 3D Printable Cement Paste and Mortars
  9. Altmetric Badge
    Chapter 8 Adapting Smart Dynamic Casting to Thin Folded Geometries
  10. Altmetric Badge
    Chapter 9 Enhancing Printable Concrete Thixotropy by High Shear Mixing
  11. Altmetric Badge
    Chapter 10 Discrete Element Simulations of Rheological Response of Cementitious Binders as Applied to 3D Printing
  12. Altmetric Badge
    Chapter 11 Three-Dimensional Printing Multifunctional Engineered Cementitious Composites (ECC) for Structural Elements
  13. Altmetric Badge
    Chapter 12 Large Scale Testing of Digitally Fabricated Concrete (DFC) Elements
  14. Altmetric Badge
    Chapter 13 Method of Enhancing Interlayer Bond Strength in 3D Concrete Printing
  15. Altmetric Badge
    Chapter 14 Exploiting the Potential of Digital Fabrication for Sustainable and Economic Concrete Structures
  16. Altmetric Badge
    Chapter 15 Alternative Reinforcements for Digital Concrete Construction
  17. Altmetric Badge
    Chapter 16 Additive Manufacturing and Characterization of Architectured Cement-Based Materials via X-ray Micro-computed Tomography
  18. Altmetric Badge
    Chapter 17 Hardened Properties of 3D Printable ‘One-Part’ Geopolymer for Construction Applications
  19. Altmetric Badge
    Chapter 18 Bond Strength in 3D Printed Geopolymer Mortar
  20. Altmetric Badge
    Chapter 19 Potentials of Steel Fibres for Mesh Mould Elements
  21. Altmetric Badge
    Chapter 20 Capillary Water Intake by 3D-Printed Concrete Visualised and Quantified by Neutron Radiography
  22. Altmetric Badge
    Chapter 21 Corrosion Challenges and Opportunities in Digital Fabrication of Reinforced Concrete
  23. Altmetric Badge
    Chapter 22 The Effect of Print Parameters on the (Micro)structure of 3D Printed Cementitious Materials
  24. Altmetric Badge
    Chapter 23 Compressive Strength and Dimensional Accuracy of Portland Cement Mortar Made Using Powder-Based 3D Printing for Construction Applications
  25. Altmetric Badge
    Chapter 24 Impact of 3D Printing Direction on Mechanical Performance of Strain-Hardening Cementitious Composite (SHCC)
  26. Altmetric Badge
    Chapter 25 Feasibility of Using Low CO 2 Concrete Alternatives in Extrusion-Based 3D Concrete Printing
  27. Altmetric Badge
    Chapter 26 Experimental Investigation on the Mechanical Strength and Thermal Conductivity of Extrudable Foamed Concrete and Preliminary Views on Its Potential Application in 3D Printed Multilayer Insulating Panels
  28. Altmetric Badge
    Chapter 27 Development of a Shotcrete 3D-Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures
  29. Altmetric Badge
    Chapter 28 Challenges of Real-Scale Production with Smart Dynamic Casting
  30. Altmetric Badge
    Chapter 29 The Tectonics of Digitally Fabricated Concrete. A Case for Robotic Hot Wire Cutting
  31. Altmetric Badge
    Chapter 30 Compliance, Stress-Based and Multi-physics Topology Optimization for 3D-Printed Concrete Structures
Overall attention for this book and its chapters
Altmetric Badge

Mentioned by

blogs
1 blog
twitter
2 tweeters

Citations

dimensions_citation
6 Dimensions

Readers on

mendeley
34 Mendeley
You are seeing a free-to-access but limited selection of the activity Altmetric has collected about this research output. Click here to find out more.
Title
First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018
Published by
Springer International Publishing, November 2018
DOI 10.1007/978-3-319-99519-9
ISBNs
978-3-31-999518-2, 978-3-31-999519-9
Editors

Wangler, Timothy, Flatt, Robert J.

Twitter Demographics

The data shown below were collected from the profiles of 2 tweeters who shared this research output. Click here to find out more about how the information was compiled.

Mendeley readers

The data shown below were compiled from readership statistics for 34 Mendeley readers of this research output. Click here to see the associated Mendeley record.

Geographical breakdown

Country Count As %
Unknown 34 100%

Demographic breakdown

Readers by professional status Count As %
Student > Master 11 32%
Student > Ph. D. Student 4 12%
Researcher 3 9%
Student > Bachelor 3 9%
Student > Doctoral Student 2 6%
Other 5 15%
Unknown 6 18%
Readers by discipline Count As %
Engineering 16 47%
Design 2 6%
Business, Management and Accounting 2 6%
Materials Science 2 6%
Medicine and Dentistry 1 3%
Other 2 6%
Unknown 9 26%